Polymeric (SU-8) optical microscanner driven by electrostatic actuation

A torsional micromechanical scanner was fabricated using photosensitive polymer (SU-8). The proposed polymer-based optical microscanner with reduced torsional stiffness offers a new approach to increase scanning angles. The scanner consists of two parts; the top layer (micro mirror and electrodes) and the bottom layer (anchors and electrodes). The SU-8 scanner is actuated by electrostatic force generated by gap-closing electrodes. For the fabricated optical scanner with the mirror size of 3 × 3 mm², the experimentally obtained scanning angles were 0.43° for 60 Hz (non-resonant) and 1.54° for 1.13 kHz (resonant) at the input voltage of 160 V. This paper also proposes a simple and new fabrication method, which can effectively control the stiffness of the torsional springs by molding SU-8 photoresist through V-groove on the silicon substrate, thereby increasing the scanning angles.     

Dual-wavelength cascaded Raman fibre laser

Dual-wavelength lasing at 1480 and 1500 nm has been demonstrated from a cascaded Raman fibre laser with a WDM coupler and two pairs of Bragg gratings. Intensity-adjustable, wavelength-tunable laser operation was achieved by tensile stress wavelength tuning of the gratings     

Mass Spectrometry-Based Disulfide Mapping of Lysyl Oxidase-like 2

Lysyl oxidase-like 2 (LOXL2) catalyzes the oxidative deamination of peptidyl lysines and hydroxylysines to promote extracellular matrix remodeling. Aberrant activity of LOXL2 has been associated with organ fibrosis and tumor metastasis. The lysine tyrosylquinone (LTQ) cofactor is derived from Lys653 and Tyr689 in the amine oxidase domain via post-translational modification. Based on the similarity in hydrodynamic radius and radius of gyration, we recently proposed that the overall structures of the mature LOXL2 (containing LTQ) and the precursor LOXL2 (no LTQ) are very similar. In this study, we conducted a mass spectrometry-based disulfide mapping analysis of recombinant LOXL2 in three forms: a full-length LOXL2 (fl-LOXL2) containing a nearly stoichiometric amount of LTQ, Δ1-2SRCR-LOXL2 (SRCR1 and SRCR2 are truncated) in the precursor form, and Δ1-3SRCR-LOXL2 (SRCR1, SRCR2, SRCR3 are truncated) in a mixture of the precursor and the mature forms. We detected a set of five disulfide bonds that is conserved in both the precursor and the mature recombinant LOXL2s. In addition, we detected a set of four alternative disulfide bonds in low abundance that is not associated with the mature LOXL2. These results suggest that the major set of five disulfide bonds is retained post-LTQ formation.     

Studies on the heating capacity control of a multi-type heat pump system applying a multi-input multi-output (MIMO) method

This paper describes a method to control capacity of a multi-type heat pump system. Because indoor units are interconnected, alteration of the heating or cooling setting of one indoor unit can influence the performance of the other indoor units. Proportional-integral (PI) controllers were used to assess system performance, and the PI controllers’ gain values were optimized by using a genetic algorithm. A system model was established following a system identification optimization process, and a pseudo random binary sequence was selected as the system identification input signal. A multi-input multi-output (MIMO) controller was more effective in reducing such cross-coupling effects than a single-input single-output (SISO) controller. The temperature at the secondary fluid outlet in the condenser and the saturation pressure at the evaporator were selected as the control variables in the MIMO controller. The experimental results showed that an optimized MIMO controller could reduce overshoot by up to 40% compared with the results using a SISO controller.     

X-ray photoelectron study of the MoCl2C30H30 composite

The surface of a MoCl₂C₃₀H₃₀ composite in the form of molybdenum nanoclusters in a polyacetylene matrix, produced by reacting MoCl₅ with C₂H₂ in benzene and toluene, has been studied by X-ray photoelectron spectroscopy before and after Ar⁺ ion milling. The composite actively reacts with atmospheric oxygen and moisture. As a result, the molybdenum clusters on its surface oxidize to molybdenum(V) or molybdenum(VI) oxides or oxychlorides (E _b(Mo 3d _5/2) = 232.3–232.5 eV) during the sample preparation process. The electron binding energy of molybdenum affter surface etching (E _b(Mo 3d _5/2) = 228.5 eV) suggests that the oxidation state of the molybdenum in the composite is 2⁺ or 3⁺. Analysis of the structure of the spectrum of the C 2s electrons of the inner valence molecular orbitals using the energy level diagram of the C₂ molecule suggests that the hydrocarbon matrix of the composite contains, in addition to-CH=CH-CH=CH- conjugate bonds, linear carbyne fragments: -HC=C=CH- or -C≡C-. After etching, the surface layer of the composite contained argon, which might be due to adsorption because of the small particle size of the composite or chemisorption on the surface of the polyacetylene matrix. The composite is stable in a high vacuum of 1.3 × 10⁻⁵ Pa up to 350°C and does not experience charging when exposed to X-rays, which indicates that it has weak dielectric properties.     

Optimisation of location and dimension of SMC precharge in compression moulding process

The main goal of the present study is to optimise the precharge conditions such as the precharge location and dimensions that give significant effects on the mechanical performance of composite structures manufactured by the compression moulding process. As preliminary step of optimisation, we developed a manufacturing simulation program to predict the fibre volume fraction and fibre orientation. And coupled with this simulation program and a structural analysis program, a genetic algorithm (GA) is implemented to optimise the precharge conditions. The penalty function method and the repair algorithm are modified for handling constraints. The repair algorithm is applied to a symmetric structure and an arbitrary shape structure to find optimal precharge conditions.