Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

Feature Reduction via Generalized Uncorrelated Linear Discriminant Analysis

High-dimensional data appear in many applications of data mining, machine learning, and bioinformatics. Feature reduction is commonly applied as a preprocessing step to overcome the curse of dimensionality. Uncorrelated Linear Discriminant Analysis (ULDA) was recently proposed for feature reduction. The extracted features via ULDA were shown to be statistically uncorrelated, which is desirable for many applications. In this paper, an algorithm called ULDA/QR is proposed to simplify the previous implementation of ULDA. Then, the ULDA/GSVD algorithm is proposed, based on a novel optimization criterion, to address the singularity problem which occurs in undersampled problems, where the data dimension is larger than the sample size. The criterion used is the regularized version of the one in ULDA/QR. Surprisingly, our theoretical result shows that the solution to ULDA/GSVD is independent of the value of the regularization parameter. Experimental results on various types of data sets are reported to show the effectiveness of the proposed algorithm and to compare it with other commonly used feature reduction algorithms.     

Synthesis and comparative molecular field analysis (CoMFA) of antitumor 3-arylisoquinoline derivatives

In this study a series of 3-arylisoquinoline derivatives were synthesized and cytotoxicity against human melanoma tumor cell evaluated, and a three dimensional quantitative structure-activity relationship was investigated using the comparative molecular field analysis (CoMFA). The results suggested that the electrostatic, steric and hydrophobic factors of 3-arylisoquinolines were strongly correlated with the antitumor activity. Considerable predictive ability (cross-validated r2 as high as 0.721) was obtained through CoMFA.     

Adaptive synthesis of distance fields

We address the computational resource requirements of 3D example-based synthesis with an adaptive synthesis technique that uses a tree-based synthesis map. A signed-distance field (SDF) is determined for the 3D exemplars, and then new models can be synthesized as SDFs by neighborhood matching. Unlike voxel synthesis approach, our input is posed in the real domain to preserve maximum detail. In comparison to straightforward extensions to the existing volume texture synthesis approach, we made several improvements in terms of memory requirements, computation times, and synthesis quality. The inherent parallelism in this method makes it suitable for a multicore CPU. Results show that computation times and memory requirements are very much reduced, and large synthesized scenes exhibit fine details which mimic the exemplars.     

Computer generation of phase diagrams and the associated free energy curves for a binary system

An interactive computer program is introduced in order to make a simultaneous graphical presentation of phase boundaries and their corresponding free energy curves. The program, which uses a graphics display terminal, is a useful tool in teaching thermodynamic concepts involved in phase diagrams, especially for undergraduate students.     

Diffusion of additives and plasticizers in poly(vinyl chloride): 4. A programmed temperature technique for the determination of the diffusion parameters of three dialkylphthalates

A programmed temperature technique has been developed for the measurement of the self-diffusion coefficients of additives in polymers. This has been applied to the diffusion of three dialkylphthalate plasticizers in poly(vinyl chloride). Values of the self-diffusion coefficients and the calculated activation energies obtained in this way have been compared with values previously obtained from measurements at constant temperature. It has been shown that the programmed temperature technique gives a very rapid method for the estimation of the activation energy of self-diffusion.     

Dispersion of flexible polymer chains in confined geometries

Molecular model approach has been used to predict the dispersion characteristics of flexible polymer chains in confined geometries. The analysis ranges from the early stage dispersion to the steady Taylor dispersion of the simple linear dumbbell model polymer chains. For the early stasje dispersion the ray method was applied; an Aris type moments rnothod was useful for the Taylor dispersion. Two parallel plates were chosen as a confining geometry and the specific initial condition of a point source in the midway of the gap was chosen for simplicity. It was found that the qualitative difference in dispersion properties of deformable polymer chains starts from the early stage compared with those of single Brownian particles. And it turns out that one parameter, which is similar to the relative spacing of the dumbbell to the gap of confining geometries, is useful to see the dispersion characteristics of the dumbbells.     

Catalytic Combustion of Methane over Rare Earth Stannate Pyrochlore

Well-defined Ln₂Sn₂O₇ powders (Ln = La, Sm and Gd) with a phase-pure pyrochlore structure were synthesized by hydrothermal reaction. The catalytic activities of Ln₂Sn₂O₇ powders for methane combustion were measured. Methane oxidation started at 500 °C and increased with oxidation temperature. Catalytic methane combustion is strongly influenced by the presence of oxygen vacancies that form by breaking Sn–O lattice bonds as the temperature increases. Addition of manganese to the rare earth pyrochlores improved methane oxidation activity. Manganese-doped samarium stannate pyrochlore (Sm₂Sn_1.8Mn_0.2O₇) shows highest the catalytic activity. Light-off and complete oxidation temperatures were measured at about 400 and 650 °C, respectively.     

Poly(butylene terephthalate)/organoclay nanocomposites prepared by in situ interlayer polymerization and its fiber (II)

Intercalated nanocomposites with poly(butylene terephthalate) (PBT) incorporated between the montmorillonite layers were synthesized from dimethyl terephthalate and 1,4-butane diol by using an in situ interlayer polymerization. The PBT nanocomposites were melt-spun at different organoclay contents to produce monofilaments. The samples were characterized by using wide angle X-ray diffraction, electron microscopy, thermal analysis, and tensile testing. The extent of the clay layer in the PBT was confirmed by using X-ray diffraction and electron microscopy, and the clay layer was found to be highly dispersed on a nanometer scale. The addition of only a small amount of organoclay was enough to improve the thermo-mechanical properties of the PBT hybrid fibers. The hybrids were extruded with various draw ratios (DRs) to examine the tensile mechanical property of the fibers. At DR=1, the ultimate tensile strength of the hybrid fibers increased with the addition of clay up to a critical content and then decreased. However, the initial modulus monotonically increased with increasing amount of organoclay in the PBT matrix. When the DR was increased from 1 to 6, for example, the strength and the initial modulus values of the hybrids containing 3 wt% organoclay decreased linearly.