华润贵港5000t/d燃无烟煤生产线预分解系统的设计与工程应用

分解炉是烧成系统的关键设备，尤其是对于燃无烟煤的分解炉，既要保证无烟煤粉在炉内的充分燃烧．又要利于系统的操作控制。基于分解炉煤粉燃烧机理，并通过分析影响炉内煤粉燃烧的各种因素及依据所用无烟煤的热失重分析结果，中材国际南京水泥设计研究院开发设计出了用于华润贵港5000砌工程的喷旋管道式在线分解炉，并与高效、低阻、防堵的旋风预热系统组成了性能优异的预分解系统。从实际运行情况看，该预分解系统易于操作控制，且对物料适应性强、阻力损耗小。     

国产耐火材料在欧洲3 300t/d生产线上的整体配套

Fushe-Kruje水泥厂项目位于距阿尔巴尼亚首都地拉那市28公里处，是由黎巴嫩SEAMENT集团投资兴建的．是迄今阿尔巴尼亚最大的外商投资项目，设计能力为3300t/d新型干法水泥熟料生产线，是全套生产线由我公司设计、制造成套、施工、安装、调试及试生产的总承包项目。     

Role of La2O3 in Pd-Supported Catalysts for Methanol Decomposition

Systems of Pd supported on various La₂O₃-modified -Al₂O₃ and CeO₂–Al₂O₃ catalysts were tested for catalytic methanol decomposition and characterized by means of XRD, BET, TPR, H₂-chemisorption and CO–FTIR. The addition of lanthanum significantly improved the selectivity of CO and H₂ for all the catalysts but showed a different influence on the catalytic activity in two systems. Methanol conversion decreased on La₂O₃-modified Pd/-Al₂O₃ catalysts, in line with the reduction of Pd dispersion, while the addition of La₂O₃ improved the dispersion of Pd and reinforced Pd–CeO₂ interaction for La₂O₃-modified Pd/CeO₂–Al₂O₃ catalysts, which resulted in a high production rate of CO and H₂. Thus, a synergistic effect between CeO₂ and La₂O₃ was observed on -Al₂O₃-supported Pd catalyst for methanol decomposition.     

合成氨、尿素系统蒸汽冷凝液的回收利用

通过对闲置的合成氨、尿素系统蒸汽冷凝液回收系统进行综合改造 ,将冷凝液有效回收 ,在保证各系统自身用水的同时 ,富余的冷凝液汇集后作为造气系统废热锅炉、煤气发生炉夹套锅炉用水 ,节省了大量的电站除氧软水及其热能 ,取得了显著的经济效益。     

Physical characteristics of sweet potato pulp/polycaprolactone blends

Sweet potato pulp (SSP) obtained as a by‐product from starch extraction was blended with polycaprolactone (PCL) to prepare a biodegradable plastic material. In the blends, PCL was used as a reinforcing agent. The SPP/PCL blends were prepared by compression‐molding under high temperature and pressure, at different SPP/PCL ratios, and the mechanical properties of the molded specimens were tested. Matrix structure and thermal properties were measured by using a Fourier transform infrared (FTIR) spectrophotometer, scanning electron microscope (SEM), differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). Mechanical properties (tensile and flexural properties) were also measured to find the most suitable ratio in a SSP/PCL blend. During compression molding of the SPP/PCL blends under high pressure and temperature, chemical reaction occurred between SPP and PCL, and thus, thermal stability and mechanical strength of the blends increased and water uptake decreased. Also, by increasing the PCL content in the blend, the matrix in the blend became more homogeneous, and consequently, mechanical strength of the molded specimen increased. At 7/3 or 6/4 weight ratio of SSP/PCL, water uptake of the molded specimen became substantially less than that at 8/2. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 861–866, 2004     

回火温度对ZG12Cr9Mo1Co1NiVNbNB耐热钢

为了满足高温条件下超超临界汽轮机发电机组对材料的需要,本文利用金相显微镜、扫描电子显微镜、拉伸试验机等设备研究了回火温度对ZG12Cr9Mo1Co1NiVNbNB耐热钢的组织性能的影响。研究结果表明,当保持淬火温度和时间（1100℃x1h）不变及回火时间（2h）恒定时,回火温度的变化对其显微组织及力学性能的影响比较明显。整体上来说,随着回火温度的上升,抗拉强度、屈服强度以及硬度,呈现先升高后降低的趋势,而延伸率则呈现先下降后上升的趋势。而热处理为：淬火（1100℃x1h）+第一次回火（730℃x2h）+第二次回火（720℃x2h）的试样,其显微组织相对比较理想,其板条状的回火马氏体细小致密,并且第二相呈颗粒状、大小均匀、弥散地分布于马氏体板条的晶界及晶内,因此选取其作为CB2耐热钢的优化热处理工艺。     

Resistivity and thermal reproducibility of carbon black and metallic powder filled silicone rubber heaters

Flexible heaters were prepared by extruding platinum‐catalyzed silicone rubber composites with conductive carbon black (CB) and metallic fillers. The conductor resistivity of the extruded heaters decreased in order of conductive titanium dioxide (TiO₂) > aluminum powder ≈ zinc powder > copper powder. Thermoelectric switching phenomena were investigated for the silicone rubber/CB/metallic powder systems. The positive temperature coefficient effect was dependent mainly on the CB content rather than on the content of the metallic powders. Resistivity and thermal reproducibility of the extruded heaters were also investigated by periodically applying AC voltage of 110 V. The heaters containing copper and TiO₂ powders exhibited excellent electrical reproducibility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1122–1128, 2005     

Automatic moment segmentation and peak detection analysis of heart sound pattern via short-time modified Hilbert transform

This paper proposes a novel automatic method for the moment segmentation and peak detection analysis of heart sound (HS) pattern, with special attention to the characteristics of the envelopes of HS and considering the properties of the Hilbert transform (HT). The moment segmentation and peak location are accomplished in two steps. First, by applying the Viola integral waveform method in the time domain, the envelope (E_T) of the HS signal is obtained with an emphasis on the first heart sound (S1) and the second heart sound (S2). Then, based on the characteristics of the E_T and the properties of the HT of the convex and concave functions, a novel method, the short-time modified Hilbert transform (STMHT), is proposed to automatically locate the moment segmentation and peak points for the HS by the zero crossing points of the STMHT. A fast algorithm for calculating the STMHT of E_T can be expressed by multiplying the E_T by an equivalent window (W_E). According to the range of heart beats and based on the numerical experiments and the important parameters of the STMHT, a moving window width of N = 1 s is validated for locating the moment segmentation and peak points for HS. The proposed moment segmentation and peak location procedure method is validated by sounds from Michigan HS database and sounds from clinical heart diseases, such as a ventricular septal defect (VSD), an aortic septal defect (ASD), Tetralogy of Fallot (TOF), rheumatic heart disease (RHD), and so on. As a result, for the sounds where S2 can be separated from S1, the average accuracies achieved for the peak of S1 (AP₁), the peak of S2 (AP₂), the moment segmentation points from S1 to S2 (AT₁₂) and the cardiac cycle (ACC) are 98.53%, 98.31% and 98.36% and 97.37%, respectively. For the sounds where S1 cannot be separated from S2, the average accuracies achieved for the peak of S1 and S2 (AP₁₂) and the cardiac cycle ACC are 100% and 96.69%.