Coal liquefaction using a hydrogenated creosote oil solvent: H-atom transfer from hydrogen donor components in the solvent

The presence of hydroaromatic, hydrogen donor components in a coal-derived solvent is one of the more important factors in the successful operation of a non-catalytic coal liquefaction process. Various hydrogen donor species present in a hydrogenated creosote oil have been identified. Their rate of disappearance under conditions that are consistent with a short residence time coal liquefaction process has been used to rank the reactivities of the various hydrogen donors. 1,2,3,10b-Tetrahydrofluoranthene was found to be an exceptional donor while 4,5-dihydropyrene, the hexahydropyrenes and 9,10-dihydrophenanthrene were found to be quite active. Sym.-octahydrophenanthrene and 2a,3,4,5-tetrahydroacenaphthene exhibited moderate activity. Tetralin and the four methyltetralin isomers were found to be unreactive under the coal liquefaction conditions employed.     

Analysis of polar compound classes in SRC-II liquids: Comparison of non-aqueous titrametric,i.r. spectrometric and h.p.l.c. methods

Results for various types of polar compounds in SRC-11 coal-derived liquids and other fuels were obtained by one or more of the three analytical methods: non-aqueous titration, i.r. spectroscopy and h.p.l.c. Practical aspects as well as precision, accuracy and assumptions necessary for effective application of each of the methods are discussed. H.p.l.c. is applicable to the widest variety of compound types, is the most rapid, most sensitive and shows the best promise for increased development and improvement. Application and development of these techniques is a logical step toward improving process monitoring, catalyst development, toxicological screening and general fuel analysis.     

The Effect of Moisture Content in Epoxy Film Adhesives on their Performance. II. T-Peel and 105°C Lap Shear Strength

The benefits of adhesively bonded structures are well known. However, the most significant factor limiting the extensive application of metal bonding in primary aerospace structures is the prevailing lack of confidence in its long term durability under hostile environmental conditions.^1,2     

Graft copolymerization onto rubber. VII. Graft copolymerization of methyl methacrylate onto rubber using potassium peroxydisulfate catalyzed by silver ion

The graft copolymerization of methyl methacrylate onto natural rubber (NR) was carried out varying the concentration of monomer, initiator, thiourea, and silver nitrate over a wide range. The grafting reaction was temperature-dependent. From the Arrhenius plot, the overall energy of activation was computed. A suitable reaction scheme and rate expression for the rate of polymerization was suggested.     

Bridging the research traditions of task/ego involvement and intrinsic/extrinsic motivation: Comment on Butler (1987).

In an experiment on the effects of different feedback conditions on motivationally relevant variables, R. Butler (see record 1988-21628-001) tested the hypothesis that the effects of feedback on intrinsic motivation would depend on whether that feedback promotes a task-involving or ego-involving orientation. She interpreted the findings as they relate to J. G. Nicholls's (see record 1984-28719-001) theory of task/ego involvement and our cognitive evaluation theory (E. L. Deci and R. M. Ryan, 1985). Although the data were very interesting, Butler failed to review a series of highly relevant studies, she misportrayed cognitive evaluation theory, and she drew conclusions that were not necessarily warranted given her experimental manipulations and data. This article provides a commentary on that research and presents a discussion of the relation between the two theories that Butler claimed to have tested. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

NMR Line Shape-Spin-Lattice Relaxation Correlation Study of Portland Cement Hydration

The proton free induction decay of a portland cement paste in an advanced stage of hydration can be roughly divided into three main components: (1) a component with a very short spin-spin relaxation time, T², representing the protons of the solid OH groups and the water of crystallization, (2) a component with an intermediate T, representing the bonded water in the gel phase, and (3) a third component with a relatively long T² representing the water in the micropores and layers. The dependences of the intensities, T²'s, and spin-lattice relaxation times (T¹'s) of these three components on the cement hardening time have been determined. The proton spin-lattice relaxation time of the "solid" component increases with hardening time whereas T¹ decreases for the other two components. The observed time dependence of the diffusion coefficient, D, of water in a tricalcium silicate paste supports the findings of the above correlation study.     

Fractoemission from Lead Zirconate-Titanate

We present measurements of the electron, positive ion, and photon emission accompanying the fracture in vacuum of poly-crystalline 95/5 lead zirconate-titanate. The intensities of the charged-particle components of this fractoemission are shown to depend strongly on the direction (relative to the direction of fracture) and magnitude of polarization. The most intense emission is observed when the fracture surfaces are perpendicular to the polarization direction. The emission intensity increases monotonically with polarization. These results are interpreted in terms of a model involving charge separation on the fracture surfaces leading to a microdischarge during fracture. Implications to the interpretation of triboluminesence effects are discussed.     

Conversion of acrylonitrile-based precursors to carbon fibres

The progress of stabilization of two compositions of acrylic fibres with various orientations has been followed by a variety of techniques. The thermooxidative treatments for stabilization have been carried out in a continuous process and also in a batch process under free shrinkage, constant length and constant tension conditions. The morphological model of acrylic fibres consists of an alternating sequence of laterally ordered and laterally disordered regions along the fibre direction. This structure is consistent with the observations based on small-angle X-ray scattering of copper- impregnated precursor fibres and thermomechanical response, thermal stress development, calorimetry, wide- and small-angle X-ray scattering and sonic modu-lus measured at different extents of stabilization. Lateral as well as orientational order in these fibres can be increased markedly through a high-temperature deformation process prior to stabilization. An increase in perfection and extent of order is observed in the early stages of stabilization. There is also a simultaneous decrease in the orientation of the disordered phase at this stage and the extent of this decrease depends on the axial constraints imposed on the fibre. Little difference in the rate of stabilization is observed as measured by density or oxygen uptake for fibres with different extents of orientation, lateral order or restraint. Fibres containing itaconic add, a stabilization catalyst did show an increased rate of stabilization. Inferences have been drawn regarding additional research pertaining to achieving high order in precursor fibres, minimizing orientational relaxation during oxidative stabilization, and the techniques for monitoring the extents of the stabilization treatment and the changes in relevant morphological parameters.     

Long-term transients in a reactor under forced concentration cycling

In the approach to a cycle-invariant state in the forced feed concentration cycling of the CO oxidation over a NiO catalyst, a very long transient has been observed lasting 80 ks or more. This transient appears to be associated only with CO pretreatment of the catalyst and is not a general phenomenon. The slow convergence to the cycle-invariant state reported in certain modelling calculations in the literature appears to have a different cause.