Sliding wear of Al2O3P/6061 Al composite

The mild sliding wear behaviour of a 15 vol % Al₂O_3P/6061 Al composite has been investigated by using a pin-on-disc reciprocating sliding machine. The composite has been shown to exhibit an excellent wear resistance as compared to the unreinforced matrix alloy. The wear rate of the composite under dry wear conditions with a 12N load is approximately one tenth of that in the 6061 aluminium alloy. The wear rate of the composite under lubrication with 15W/40 gear oil under a 100N load is only one thousandth ofthat in the 6061 aluminium alloy.The dry wear resistance of an over-aged sample is shown here to be better than a peak aged or under-aged sample when the composite was aged at 160°C. The coefficient of friction of the composite was approximately 0.5–0.6 under dry conditions and 0.07 in lubricated wear experiments.In the initial stage, the worn surface of the composite under dry conditions is primarily composed of ploughed grooves and ductile tear. The composite makes a conducting contact with the steel pin. The worn surface is composed of compacted powder and the contact potential gradually increases when the period of the wear experiment goes beyond 2 h.     

Influence of lips on thin-walled sections

Turning the free edge of an unstiffened flange inwards or outwards to form a ‘lip’, can substantially improve the local buckling resistance of a member. The lip is the most common type of edge stiffener used in cold-rolled, thin-walled sections. In this paper the behaviour of plate elements of thin-walled sections stiffened by compound lips (i.e. lips which are folded twice to form ‘lips on the lips’) is examined both theoretically and experimentally. An outline of a series of tests on compound edge-stiffened thin-walled sections of various geometries is given and some load-end compression displacement paths are compared with the theoretical predictions. Reasonably good agreement is obtained between the experimental and theoretical results. Comparisons of the theoretical predictions with experimental results of other researchers are also presented in this paper.     

New substrates of papain, based on the conserved sequence of natural inhibitors of the cystatin family

A discontinuous borate/formate buffer system is presented for horizontal polyacrylamide gel electrophoresis of DNA fragments. The resolution potential of the system could be altered by changing the total monomer concentration (5-9%T), the concentration of the crosslinker piperazine diacrylamide (2-5%CPDA), as well as the concentration of formate in the gel (40-120 mM), the leading ion of the buffer system. The separation of DNA fragments would be improved by increasing the migration distance from 22 to 28 cm. This discontinuous polyacrylamide gel electrophoresis system proved highly reproducible.     

Visual functions after photorefractive keratectomy

1. 45 myopes (-3.0 to -6.0 D) were examined before and 1 and 6 months after photorefractive keratectomy (PRK). Visual acuity (VA) was tested using Snellen and logMAR charts. Contrast sensitivity (CS) was measured using a computerized system. 2. Preoperative best corrected VA (BCVA) in myopes was significantly lower in comparison with a control group using logMAR charts only. A reduction of BCVA by both methods at 1. month and its return after 6 months nearly to original values was noted. 3. Significantly lower values of CS were found in patients before PRK compared to the control group. After 1 and 6 months stayed the values on preoperative level.     

Extraction of Anthocyanin Pigments from Purple Sunflower Hulls

The anthocyanin pigments in hulls of purple sunflower seeds were extracted using three solvent systems, 50:1:49 ethanol-acetic acid-water (EAW), 0.01M acetic acid (AAc), or water containing SO₂. Solvent, extraction time, size of ground hulls, pH of extracting solvent, hulls/solvent ratio, and concentration of SO₂ in water, were investigated. All were significant factors affecting yield of extracted anthocyanins. EAW and SO₂ were more effective extractants than AAc. Optimum conditions from response surface optimization for the extraction with sulphurous water were: SO₂ at 200 mg/L, hull size 20 mesh, extraction time 5 min at 22°C, and solvent/hulls ratio = 20.     

EFFECT OF STORAGE ON THE RHEOLOGICAL BEHAVIOUR OF BABY FOODS

The effect of storage temperature on rheological behaviour of four varieties of baby foods was studied. After 24-month storage at 15C and 25C, the constant A in Weltman model increased significantly for the vegetables, meat and fish samples, and decreased significantly for the fruit samples. After 24-month storage at 5C and 15C there were no significant changes in flow behavior index, consistency index and yield stress of the Herschel-Bulkley model for the vegetables, meat, fish and fruit samples. Increase in storage temperature decreased the consistency index and yield stress of the fruit samples.     

NMR IMAGING, CALORIMETRIC, and MATHEMATICAL MODELING STUDIES of FOOD FREEZING

Nuclear magnetic resonance imaging (MRI), calorimetry, and temperature measurements were used to monitor cylindrical potato sections frozen at -11C and -42C. MRI showed the advance of the nonsymmetric freezing zone and loss of signal intensity as liquid water turned to ice. Differential calorimetry was used to follow heat removal during transient freezing. Measured times to 95% enthalpy change were 24 min (-42C) and 49 min (-11C), as compared to modeled values of 29 min (-42C) and 100 min (-11C). Times to 95% change in the NMR signal, integrated over the area of the image, were 21 min (-42C) and 56 min (-11C). Changes in NMR signal intensity could be correlated with the amount of unfrozen water remaining after a steady-state had been reached. At -42C, NMR indicated 25% unfrozen water remaining as compared to 26% by calorimetry, and 22% by modeling. At -11C, NMR measured 67% unfrozen water remaining as compared to 48% by calorimetry, and 25% by equilibrium modeling.     

Detecting delaminations in a composite beam using anti-optimization

The present study proposes a detection technique for delaminations in a laminated beam. The proposed technique optimizes the spatial distribution of harmonic excitation so as to magnify the difference in response between the delaminated and intact beam. The technique is evaluated by numerical simulation of two-layered aluminum beams. Effects of measurement and geometric noise are included in the analysis. A finite element model for a delaminated composite, based on a layer-wise laminated plate theory is used in conjunction with a step function to simulate delaminations     

Joint stick-slip friction compensation of robot manipulators by using smooth robust controllers

In this article, two new smooth robust nonlinear compensators have been developed, respectively, for positional regulation and trajectory tracking of rigid robot manipulators with internal joint stick-slip friction. The proposed controllers can improve not only the positioning accuracy but also the smoothness of motion. No exact knowledge of the friction models is required for the design of the controllers. Furthermore, the tracking controller is also robust with respect to the uncertain link parameters. Using Lyapunov's direct method, we can show that the time-invariant positional regulation controller guarantees the global boundedness stability of the closed-loop system, while the time-varying positional tracking controller guarantees the global asymptotic stability of the closed-loop system. The numerical simulations of the controllers on a two-link robot are presented as illustrations. © 1994 John Wiley & Sons, Inc.