Ferrocene-bound polyester resins

Seven ferrocene-bound polyester resins were prepared from fumaric acid and diethylene glycol in the presence of different ferrocene derivatives. To accomplish the incorporation of the organometallic moiety into the polyester resin chain, the cyclopentadienyl rings of ferrocene were substituted in the 1,1′ positions with reactive functional groups. The ferrocene derivatives used were: 1,1′-bis(1-hydroxyethyl) ferrocene 1 , 1,1′-ferrocene dicarboxylic acid 2 , and 1,1′-ferrocene diacetic acid 3 . The incorporation of an organometallic complex significantly increased the rate of the polyesterification process. In order of increasing rate enhancement, the effect was 2 < 3 < 1 . The effectiveness of ferrocene derivatives chemically incorporated into the polyester backbone during copolymerization with styrene was studied by monitoring the gel time, cure rate, and the resin properties. The efficiency of the copolymerization reaction of ferrocene-bound polymers with styrene decreased in the order 1 ≥ 3 > 2 . Mechanisms to account for these results are presented. Some of the strength related properties were also studied.     

Heterogeneous structure of cis-isoprene rubber and oligodiene diisocyanate blends

The structural peculiarities of cis-1,4-isoprene rubber, oligodiene diisocyanate, and derivative of phenol–formaldehyde resin blends have been studied by WAXS and SAXS methods and electron microscopy. It has been demonstrated that the addition of modifiers and further thermal treatment under conventional curing conditions change considerably the microheterogeneous structure and morphology and contribute to the improvement of the short-range order in the rubber matrix.     

Parameter-Free Equation-of-State Calculations for MgO and ZrO2

The electronic band structure of ZrO₂ is calculated for the fluorite structure using the self-consistent augmented-plane-wave method in the muffin-tin approximation. The crystal charge density is then site decomposed by fitting Slater orbitals to the wave functions in the muffin tins. The resultant charge densities for Zr⁴⁺ and O²⁻ are then used in the Gordon-Kim method to derive pair potentials, from which a number of structural, elastic, and thermodynamic properties are calculated and compared with experimental results and similar calculations for MgO.     

Factors affecting cloud point analysis of palm oleins

Some of the factors affecting cloud point determination of palm oleins are described. These are the type of container used, method of stirring, rate of stirring and bath temperature. The repeatability and reproducibility standard deviations of the method are determined from collaborative trials. Recommendations for the test are made to reduce the large variations among laboratories.     

Stability studies on methyl and ethyl fatty acid esters of sunflowerseed oil

Fatty acid esters, high in linoleic acid, were prepared and stored for long-term engine tests. Storage tests with these esters were undertaken to obtain more information on optimal storage requirements and general stability characteristics. Samples were kept at three temperature levels (20 C, 30 C and fluctuating around 50 C) for a 90-day period and were removed at regular intervals for chemical and physical analysis. The influence of air, temperature, light, TBHQ and contact with mild steel was evaluated by comparing the free fatty acid, peroxide, anisidine, ultraviolet absorption, viscosity and induction periods. A statistical model was used to evaluate the data and to reduce the large number of data points to comparable curves. Storage of esters in contact with air, especially at a temperature above 30 C, resulted in significant increases in peroxide, ultraviolet absorption, free fatty acid, viscosity and anisidine values. Exclusion of air retarded oxidation at all temperature levels. A direct relationship between viscosity increases and oxidation parameters was evident. Exposure to light caused a small increase in the oxidation parameters of esters stored at the highest temperature level. Addition of TBHQ prevented oxidation of samples stored under moderate conditions. Under unfavorable storage conditions the anti-oxidant was no longer effective. Mild steel had very little effect on the oxidation parameters. Only the anisidine values of samples stored at the highest temperature level were slightly increased. Methyl esters performed slightly better than ethyl esters during the storage test. The following practical guidelines for storage of fatty acid ester fuels are: (i) airtight containers should be used; (ii) the storage temperature should be <30 C; (iii) mild steel (rust free) containers may be used, and (iv) TBHQ has a beneficial effect on oxidation stability.     

Knowledge-based understanding of radiology text

A data acquisition tool which will extract pertinent diagnostic information from radiology reports has been designed and implemented. Pertinent diagnostic information is defined as that clinical data which is used by the HELP medical expert system. The program uses a memory-based semantic parsing technique to 'understand' the text. Moreover, the memory structures and lexicon necessary to perform this action are automatically generated from the diagnostic knowledge base by using a special purpose compiler. The result is a system where data extraction from free text is directed by an expert system whose goal is diagnosis.