Mobilization of lead from human bone tissue during pregnancy and lactation--a summary of long-term research

The skeleton is potential endogenous source of lead during pregnancy and lactation. We have undertaken a longitudinal investigation into the mobilization of lead from the human maternal skeleton to determine whether lead is mobilized from the maternal skeleton during pregnancy and lactation, and if so, when and how much is released. Subjects in the study were migrants to Australia (n=15) whose skeletal lead isotopic composition (endogenous lead) was different to that prevailing in the Australian environment (exogenous lead). This migrant cohort was compared with 6 multi-generational Australian controls. Biological and environmental samples were taken pre-pregnancy where possible, throughout pregnancy and postpartum for at least 6 months. Newly-born infants of the migrant and Australian mothers were monitored for 6 months. Blood lead concentrations for the migrant mothers ranged from 1.5 to 20 microg/dl (geometric mean 2.8) and for Australian mothers ranged from 1.9 to 4.3 microg/dl (geometric mean 2.9). There was minimal change in lead isotopic composition of the Australian pregnant controls although there were increases of approximately 40% in blood lead concentration in 3 of 6 cases during the postpartum period and from 0 to 12% in the other 3. In the migrant pregnant subjects, the geometric mean skeletal lead contribution to blood lead using the isotopic composition was approximately 33% (range 10-88%) for 14 subjects using a revised estimate for exogenous lead. Skeletal contribution to blood lead during the postpartum period was significantly greater than during pregnancy (P<0.001). The skeletal contributions to blood lead are higher and the changes are more consistent in those subjects who conceived within 100 days of arrival in Australia compared with those who conceived longer than 100 days. In the migrant subjects, changes in blood lead concentration during pregnancy and postpartum varied from subject to subject with an overall 20% increase; the increases during the postpartum period were greater than during pregnancy (P<0.001). It was estimated that the amount of maternal skeletal lead mobilized during pregnancy and transferred to the infant via cord blood averaged approximately 79%. The increased skeletal contribution to blood lead is attributed to a low daily calcium intake of approximately 500 mgCa/day, a condition which was present in both migrant and Australian subjects. An ongoing clinical trial is providing a new cohort with calcium supplements. A summary of other aspects of the study is included and covers: additional flux released from the skeleton during pregnancy and postpartum; XRF bone lead results; urinary excretion of lead during pregnancy and postpartum; dietary contribution to blood lead in female adults and children; comparison of rates of exchange of lead in blood of newly-born infants and mothers; relationships of lead in breast milk to lead in blood, urine and diet of the infant and mother; changes in blood lead after cessation of breastfeeding; urinary lead isotopes during pregnancy and postpartum indicate no preferential partitioning of endogenous lead into plasma; a comparison of some aspects of the nonhuman primate and human pregnancy studies.     

The 20th century whole-basin trophic history of an inter-drumlin lake in an agricultural catchment

Eight 1-m sediment cores were extracted from across the basin of Friary Lough, a 5.4-ha eutrophic lake in a wholly grassland agricultural catchment in Co. Tyrone, Northern Ireland. Sedimentary TP, diatom inferred TP, Ca, Na, Fe, Mn, loss-on-ignition (LOI), dry weight and density were determined in the core profiles. Core dating and correlation gave a 210Pb, 137Cs and 241Am chronology from 1906 to 1995 and enabled a whole-basin estimate of chemical and sediment accumulation rate over the 20th Century. The major changes for all parameters occurred after c. 1946. Sediment accumulation rate was most influenced by organic matter accumulations, probably of planktonic origin, and increasing after c. 1946. Inorganic sediment accumulation rate was found to be largely unchanging through the century at 10 t km(-2) yr(-1) when expressed as catchment exports. All chemical accumulation rate changes occurred after c. 1946. Total phosphorus accumulation rate, however, was found to be the only chemical to be increasing throughout the epilimnion and hypolimnion areas of the sedimentary basin at an average of 22.5 mg m(-2) yr(-1) between 1946 and 1995. The other chemical parameters showed increasing accumulation rates after c. 1946 in the epilimnion part of the basin only. Interpreted in terms of whole-basin sedimentation and catchment export processes over time, it is suggested that diffuse TP inputs are independent of sediment inputs. This corresponds to hydrochemical models that suggest soluble P as the primary fraction that is lost from grassland catchments. The increase in sedimentary TP accumulation rate, and DI-TP concentration, are also explained with regard to current models that suggest increases in runoff P concentrations from elevated soil P concentrations. Increases in eplimnion chemical and sediment accumulation rate after c. 1946 may be due to local erosion that has limited impact on lake basin sedimentation.     

Full scale fire tests for ship accommodation quarters

Ten full-scale test fires were conducted in a chamber simulating a three person ship accommodation quarter. The test fires used three different ventilation conditions, two types of bunks and furnishings with either polyurethane foam or chloroprene foam. The chamber was instrumented to follow the development of the fire.The furnishings with polyurethane foam were readily ignited and produced an intense fire within 2 to 4 minutes. The furnishings with chloroprene foam ignited but burned slowly with a small flame or in smoldering combustion.The ventilation conditions had a significant effect on the development and intensity of the fire as the test fires were burning under oxygen-limiting conditions.The solid pan bunks retarded the early development of the fire compared to open bunks for polyurethane furnishings. However, once the mattresses on the three bunks were ignited the intensity of the test fires was similar for both types of bunks.     

Finite element modelling of plate girders with web openings

This paper is concerned with a finite element model to predict the behaviour and ultimate load of plate girders with web openings. The finite element package is used to model the plate girders with web openings. Accuracy of the model is assessed by applying it to plate girders tested earlier by other researchers. Comparison of analytical results with the available experimental results for yielding patterns, ultimate load values and load–deflection relationships show good agreement between the finite element and experimental results thus validating the accuracy of the proposed model. The proposed finite element method was extended to carry out a parametric study. The study covered parameters such as web slenderness and flange stiffness.     

Protocatechuic acid ozonation in aqueous solutions

The oxidation of protocatechuic acid with ozone in aqueous solution has been studied varying the temperature, pH, ozone partial pressure and initial acid concentration. A stoichiometric ratio of 2 mol of ozone consumed per mol of protocatechuic acid reacted is deduced from homogeneous experiments in a discontinuous tank reactor.In the ozonation experiments, the influence of the operating variables was established and the kinetic regime of ozone absorption was shown to be fast and pseudo m-order with respect to ozone, except at pH 2, when the reaction develops in the moderate kinetic regime. After applying a mass transfer with chemical reaction model, the reaction orders are deduced and the kinetic rate constants are determined as a function of pH and temperature. A modified Arrhenius expression is proposed to correlate them.     

Compartment tests of polyurethane foam seating assemblies

Data from compartment tests of polyurethane foam seating assemblies are reported. Results show that the behavior of such assemblies during fires is strongly dependent on the type and position of interliners and upholstery fabrics. An incidental comparison of peak rate of heat release obtained in a compartment test with a predictive model equation is made and selected data from the tests are presented.     

Contribution à l'étude de la détermination des conditions de formation des haloformes

In recent years the presence of haloforms has been observed by some researchers in waters of various origins.The aim of this study is to determine the conditions in which chloroform is formed by chlorination of aqueous solutions of some organic compounds.The first part of this work was carried out by chlorination of synthetic basic solutions of acetone and thus enabled us to determine the reagent concentrations needed to obtain the maximum quantity of chloroform.We studied next the effect of chlorination on organic material solutions (humic acids and phenols), in the course of an oxidation treatment; the results obtained by chlorination of aqueous solutions of humic substances show that the quantity of chloroform produced passes through a maximum value which depends on the time of ozonisation. Similar results were obtained for the chlorination of phenol solutions during oxidation by the u.v. + H₂O₂ system. These results may be explained by the partial degradation of the molecules which leads in the formation of reactional intermediate precursors of the haloform reaction. We undertook at the same time the study of a rapid test allowing us to detect the presence of haloform reaction precursors in a certain sample of water.     

Settlements and deformations of industrial structure built on weak soils

Conclusions 1. In engineering-geologic explorations, it is necessary to investigate the engineering-geologic morphology to a depth of 15–18 m: lenses and interlayers of weak soils - unevenly compacted silty-sand fills, peat, slime, etc.2. Open unwatering of pits in the vicinity (10–15 m) of existing structures is impermissible, since it leads to removal of fine soil fractions because of piping, and to large and impermissible deformations of the load-bearing elements of the structures. In such cases, deep groundwater lowering by means of wellpoints should be used.In the case described in this article, the industrial structure underwent a mean settlement of about 20 cm, a tilt of 0.015, and a wall deflection of 0.002. By using deep groundwater lowering, such deformations could have been prevented.3. The development of settlements with time was due to the presence of weak soils - peat lenses and thin slime interlayers - in the foundation bed of the shop.4. An effective means for stopping the settlement of the industrial structure was the construction, under the walls, of two rows of cast-in-place piles with cantilever beams to which the wall loads were transmitted.Scientific-Research Institute of Foundations. GIPROLESKhIM. Translated from Osnovaniya, Fundamenty i Mekhanika Gruntov, No. 1, pp. 5–7, January–February, 1975.     

Sorption of benzenesulfonates by weak base anion exchange resins

Weak base phenol formaldehyde anion exchange resins were found to have an excellent capacity for removing the anionic organic species benzenesulfonate (BS), p-toluenesulfonate (PTS) and dodecylbenzenesulfonate (DBS) from pH 2 and 4 solutions. The capacity for DBS was generally greater than that of activated carbon and significantly greater than that of a polystyrene-divinylbenzene resin with no ion exchange functional groups. The maximum capacity of the weak base resins appeared to be limited by the exchange capacity of the resin. The mechanism of removal was strongly indicated as being either ion exchange at the amine functional groups in the acid form, or uptake of a proton by the amine groups in the free base form with the organic anion as the associated counter ion. Increasing concentrations of Cl⁻ decreased the amount of organic anion that could be sorbed.The swelling of one of the resins, Duolite A-7, also had a marked effect on its sorption capacity. The pores of the acid chloride or acid organic anion form of the resin were apparently larger than those of the free base form; thus, as conversion of the resin to the acid form took place, a greater amount of uptake was observed. The effect of swelling on the capacity of Duolite S-37 was much less, apparently owing to its larger pore structure, but its capacity for DBS at low pH was lower than that for A-7 because of its lower nitrogen content. Also, BS and DBS were easily removed from the weak base resins by washing them with NaOH. Four bed volumes of 1 m NaOH gave essentially complete regeneration of BS saturated A-7.