Wear Resistance of CO2 Corrosion Product Scale Formed at High Temperature

 To investigate the correlation between structure characteristics and wear resistance of CO2 corrosion product scales at high temperature and high pressure, an autoclave was used to prepare CO2 corrosion product scales on N80 steel in carbon dioxide corrosion environment. The correlation between wear resistance of the scales and many other factors, such as temperature, pressure, morphology, structure, velocity of fluid medium, sand grain size, and so on, was comparatively analyzed by a self assembled wear device, and the scale morphologies before or after being worn were observed by scanning electron microscope (SEM). And then the surface grain size and thickness of scale were measured. The results showed that the cross section of the corrosion scale was of a double layer structure, the outer layer of which was composed of regular crystals, whereas the inner layer was a thin scale of fine grains. The outer grain size and thickness of scale varied with temperature, and the initial wear loss was consistent with the surface grain size; at the same time, the total wear loss corresponded to the thickness of scale. Compared to wear resistance in different depths of the scale, it was found that the structure of scale was a double layer structure in cross section, and the wear resistance of inner layer was better than that of the outer layer; the closer the scale to the matrix, the greater was the wear resistance of scale; and the larger the size or the higher the rotary speed of solid grain in multiphase flowing medium, the more was the wear loss of scale.     

Influence of Interfacial Diffusion on Mechanical Property of Vacuum Fusion Sinter （VFS） WC-Co Composite Coating

The WC-Co composite coatings bonded tightly to steel substrate have been made by vacuum fusion sinter （VFS）. The concentration distribution of some components were measured by the electron probe, and the microstructure and morphology of VFS coatings were observed and analyzed by SEM, X-ray diffractometer and microhardness tester. Diffusion coefficient of every element was calculated by using the experimental results. The influence of the interracial diffusion on the microstructure, Vickers hardness and interracial bond strength of the VFS coatings was studied in detail. The experimental results show that there is a metallurgical bond area between the VFS WC-Co coatings and the steel substrate. The VFS coatings are characterized by the gradient hardness of the interface and the high bond strength to the steel substate, both of which are beneficial to the improvement of the wear resistance and corrosion resistance.     

基于PS/PAA两嵌段共聚物组装行为的银纳米粒子的制备

研究了两亲性嵌段共聚物聚苯乙烯-b-聚丙烯酸(PS-b-PAA)的胶束化行为,探讨了胶束对A gNO3的增溶作用以及胶束内A gNO3的还原反应。结果表明:PS-b-PAA在二甲苯中可以形成直径在40 nm~100 nm之间的胶束;PS-b-PAA胶束对A gNO3具有明显的增溶作用,但胶束溶液对A gNO3的溶解能力较弱,络合银的羧酸基团占总羧酸基团的7.4%。还原剂的用量及胶束内A gNO3的渗入量是影响胶束内银纳米粒子生成及形态的重要因素,随着还原剂加入量的增多,胶束中生成的银粒子尺寸减小,每个胶束中出现多个纳米粒子。     

一种小型校园网的组网方案

提出一种小型校园网的组网方案,从逻辑上把校园网分成校务网、教学网、公共网等三个独立的业务网,使用MA5200F作为核心组网设备,使用Quidway○RS2026和Quidway○RS3026做为各逻辑组成的交换机,使用Eudemon 100为专用硬件防火墙设备,并通过S2026的端口的VLAN特性对其用户进行VLAN的划分和访问权限的控制,这使得构建出来的校园网具有性能高、扩展性高、安全性高和管理简单等特点.     

双城凹陷断裂特征及其对油气运聚的控制

双城凹陷断裂极为发育,均为正断层,断裂以南北向和北北东向为主,在剖面上断裂的形成明显具有分期性。断裂对油气运聚、成藏的控制作用主要表现在:基底大断裂F1对压力起到了分割面的作用,控制了油气运移的方向,断裂为油气运移提供了通道作用,断裂的封闭性为油气的聚集成藏提供了遮挡条件。通过断裂特征及其对油气运聚的控制作用分析表明,双西陡坡带为油气运移的指向区;结合对该区的沉积、构造等条件的分析认为双西斜坡为油气勘探的有利地区。     

基于IPv6智能节点的弹性重叠网络中间件

结合IPv6和P2P技术,提出了基于IPv6的智能节点弹性重叠网络中间件的设计方案,定义了该中间件系统的功能,给出了系统框架结构,讨论了智能节点的功能和扩展机制,设计和实现了节点发现机制。     

G语言中的内存分配与管理算法

针对G语言特定的数据要求,提出一种新的内存分配与管理算法,在满足多种基本类型和数组及簇等复杂数据结构的分配与管理的基础七,实现数据的产生及生命周期管理、数据信息的完备性及独立性描述。在不牺牲运行效率的前提下,能够长期稳定地运行,有效避免内存碎片的产生。弗且将此算法在自丰开发的虐拟仪器开发平台LabScene中完整实现,在G语言的解析与运行模型中发挥关键作用。     

一种适用于大规模网络的组通信模型

针对网络层组播的部署难题,该文提出了一种新的适用于大规模异构网络的组通信模型——Mixcast,该通信模型采用单播和组播混合通信的方式,在接入网闻使用单播,在接入网内使用组播,同时结合IEEE802．1X协议进行访问控制管理,从而在地址分配、组成员管理、协议可扩展性、协议复杂性方面,有了不同程度的改进。     

高速遥感图像实时压缩仿真系统研究

随着遥感技术快速发展,遥感图像数据已成为空间信息的重要数据源之一,卫星遥感图像高速实时传输已经成为当前研究的热点问题,并伴随着巨大的市场需求。该文针对卫星上遥感图像数据实时高速压缩、传输的需求。在Visual C＋＋环境下,建立了对卫星遥感图像进行压缩、传输、解压、接收、显示等过程进行仿真研究的仿真系统。该系统主要使用JPEG2000算法进行了仿真分析,在仿真系统的设计实现中采用图像分块压缩等关键技术,并针对压缩速度提出了压缩效率、信噪比等评价指标。仿真结果证明了图像数据压缩系统的有效性。该项研究成果可以用于对遥感图像实时压缩算法进行仿真研究和分析,也可作为地厩图像处理系统对遥感图像数据进行观测。同时,该文研究内容还将有效地提高图像数据系统的压缩传输效率。     

整体喷嘴环电火花清根加工关键技术

针对整体喷嘴环叶片与缘板间的新型过渡圆角加工问题,采用数控铣削+电火花加工的组合工艺,对整体喷嘴环电火花清根加工技术进行了研究.提出一种电火花清根加工专用电极设计方法,采取周向压缩和径向压缩的策略,定义径向最佳压缩方向并进行求解,使得电极在保留通道过渡圆角区域型面的同时,体积在一定范围内可调.提出一种电极移出轨迹设计方...