A Newly Developed Non, Destructive Tritium Measurement Technique and Its Application to V-4Cr-4Ti Alloy

A non-destructive and in-situ technique for the measurement of tritium in materials, namely β-ray-induced X-ray spectrometry （BIXS）, has been developed recently. In the present study a V-4Cr-4Ti alloy was pre-heated at 1000℃ for 2 h to form a recrystallization structure before the tritium absorption experiments were conducted. Firstly the hydrogen isotope gas was charazterized by means of a quadrupole mass spectrometer （QMS） and a small-sized ionization chamber. Then hydrogen isotope absorption tests of V-4Cr-4Ti alloy were performed at 400 ℃ and the atomic concentration of hydrogen isotope in V-4Cr-4Ti alloy was estimated as 0.17% with a tritium content of approximately 2.5 ppm. Experimental results indicate that BIXS is a quite useful tool for quantitatively measuring the tritium content and tritium distribution in the surface layers of vanadium alloys and no strong trapping effects of tritium exist in the pre-heated V-4Cr-4Ti alloy.     

The oxidation of two ternary Ni-Cu-10 at.% Al alloys in 1 atm of pure O2 at 800-900 °C

The oxidation of the ternary alloys Ni-45Cu-10Al and Ni-30Cu-10Al has been studied at 800-900 °C under 1 atm O₂. The presence of 10 at.% Al reduces significantly the oxidation rate of the corresponding Cu-Ni alloys during the initial oxidation stages, even before the establishment of a complete Al₂O₃ layer. The weight of individual sample of the two ternary Ni-Cu-10Al alloys at 800 °C increases more rapidly than at 900 °C during the initial oxidation stage. As oxidation proceeds, the weight gain at 800 °C slows down to a degree that the total weight gain after 24 h oxidation at 800 °C is less than that at 900 °C. Due to a faster formation of the Al₂O₃ layer, which suppresses earlier the further oxidation of Cu and Ni, the external region of the scales grown on Ni-45Cu-10Al contain much less Cu and Ni oxides than those grown on Ni-30Cu-10Al. The transition from the internal oxidation to the selective external oxidation of the most reactive component Al in Ni-Cu-Al alloys is favored by higher values of the Al content, of temperature and of the Cu/Ni ratio.     

基于资源流分析的企业生态补偿机制研究

循环经济作为一种新型的经济范式,成为理论界和实业界共同关注的焦点问题.在循环经济模式下引入了投入产出的资源流管理模型,该模型反映各个过程中资源流的流向和流量,为建立生态补偿机制提供了详细的基础数据,并利用外部环境的完善,推动生态补偿机制在微观领域的实施,从而达到改善企业环境绩效,减少环境污染的目的.     

盐和水蒸气协同作用下TiAl合金腐蚀性能研究及其防护

研究了在700℃盐和水蒸气协同作用下TiAlNb合金的腐蚀行为以及溅射涂层对TiAlNb合金的防护作用。结果表明，在盐和水蒸气协同作用下，溅射TiAlCrAg涂层对TiAlNb合金具有一定的保护作用。盐和水蒸气协同作用加速了合金以及涂层的腐蚀。挥发性气体氯化物对α2相的循环作用是TiALNb合金腐蚀的主要原因。涂层中较少的α2相以及Laves相中较高的Cr含量是腐蚀有所减缓的主要原因。     

Design of the ECRH/ECCD Launcher System for HL-2A Tokamak

An ECRH/ECCD system with two 68GHz/500kW/1S gyrotrons will be built up in HL-2A tokamak. The location of the Gaussian beam waist is 580 mm away from the center of the plasmas and the beam radius is 37 mm at the center of the plasmas. Compared to the minor plasma radius （420 mm）, it is small enough for localized control. The launcher system covers a wide toroidal and poloidal steering range by the two steering plane mirrors. Therefore it is possible to explore the on- and off-axis heating over half of the plasma minor cross section and the co-current drive.     

双机械臂协调：以运动学为基础的模型分析与动态补偿控制方法

本文建立了双机械臂协调系统的主从式控制的非结构模型，并针对两臂具有相同特性和不同特性这两种情形作了稳定性分析，提出特性校正的方法，本文还利用内模原理设计出动态补偿器来克服标定约束的不确定性对系统控制品质的影响，最后给出了实验结果。     

形态学边缘检测的新算法及其应用

提出了一种基于数学形态学的边缘检测的所算法，该算法具有简便和灵活可编程控制等优点，比原来主算法更国完善，在实际应用中有着很好的前景，并给出了实验结果。     

济钢第一炼钢厂降低钢铁料消耗实践

济钢第一炼钢厂通过优化入炉原料结构,改进冶炼工艺,实施少渣炼钢,有效减少了转炉吹损,降低了钢铁料消耗成本,2002年增加炼钢综合经济效益3100多万元。     

新钢板坯连铸中间包采用控流槽的水模拟实验

通过板坯连铸中间包水模拟实验,表明新型控流装置--控流槽可大大改善中间包内流体的流动特征参数和流动轨迹,并具有防止卷吸气体作用.