A CMOS Low-Noise Instrumentation Amplifier Using Chopper Modulation

This paper describes a low-power, low-noise chopper stabilized CMOS instrumentation amplifier for biomedical applications. Low thermal noise is achieved by employing MOSTs biased in the weak/moderate inversion region, whereas chopper stabilization is utilized to shift 1/f-noise out of the signal band hereby ensuring overall low noise performance. The resulting equivalent input referred noise is approximately 7 nV/ ?{Hz}\sqrt{\rm Hz} for a chopping frequency of 20 kHz. The amplifier operates from a modest supply voltage of 1.8 V, drawing 136 A of current thus consuming 245 W of power. The gain is 72.5 dB over a 4 kHz bandwidth. The inband PSRR is above 90 and the CMRR exceeds 105 dB.     

Dihydroazulene Photoswitch Operating in Sequential Tunneling Regime: Synthesis and Single‐Molecule Junction Studies

Molecular switches play a central role for the development of molecular electronics. In this work it is demonstrated that the reproducibility and robustness of a single‐molecule dihydroazulene (DHA)/vinylheptafulvene (VHF) switch can be remarkably enhanced if the switching kernel is weakly coupled to electrodes so that the electron transport goes by sequential tunneling. To assure weak coupling, the DHA switching kernel is modified by incorporating p‐MeSC₆H₄ end‐groups. Molecules are prepared by Suzuki cross‐couplings on suitable halogenated derivatives of DHA. The synthesis presents an expansion of our previously reported bromination–elimination–cross‐coupling protocol for functionalization of the DHA core. For all new derivatives the kinetics of DHA/VHF transition has been thoroughly studied in solution. The kinetics reveals the effect of sulfur end‐groups on the thermal ring‐closure of VHF. One derivative, incorporating a p‐MeSC₆H₄ anchoring group in one end, has been placed in a silver nanogap. Conductance measurements justify that transport through both DHA (high resistivity) and VHF (low resistivity) forms goes by sequential tunneling. The switching is fairly reversible and reenterable; after more than 20 “ON‐OFF” switchings, both DHA and VHF forms are still recognizable, albeit noticeably different from the original states.     

In-network performance of handheld mobile terminals

This paper considers a realistic evaluation of the power mobile handsets are able to transmit and receive. It has been suggested to use the so-called total radiated power (TRP) and the total isotropic sensitivity (TIS) for the uplink and downlink, respectively, which may be seen as special cases of the general mean-effective-gain (MEG) measure. These measures are computed from the spherical radiation pattern of the handset and the different measures are obtained by using different models of the mobile propagation environment. In this paper, the results obtained via the spherical radiation patterns are compared with the equivalent performance obtained in a live Global System for Mobile Communications (GSM) network using data from the Abis network interface. This method does not require altering of the handsets and the testing uses normal calls in the network. The investigation is based on measurements with four different commercially available handsets carried out in two different indoor environments and involving 22 test users. In addition, a series of measurements were also made with a phantom simulating the handset user, allowing a test of how well the phantom represents the average user.     

Isolation of adipophilin and butyrophilin from bovine milk and characterization of a cDNA encoding adipophilin

The milk fat globule membrane-associated proteins adipophilin (alias adipocyte differentiation-related protein) and butyrophilin were purified from bovine milk by reverse-phase chromatography. The nucleotide sequence of bovine adipophilin was obtained via peptide mapping and sequencing of a mammary gland cDNA clone, which comprises 1841 nucleotides and has an open reading frame of 450 amino acids. By peptide mapping, 19% of the amino acid sequence was confirmed. The obtained amino acid sequence has 87 and 80% identical residues with human and mouse adipophilin, respectively. Alignment with the proteins perilipin and TIP47 revealed two highly conserved segments, which may assemble into amphipathic alpha-helices.     

Mobility Impact on Cluster Based MAC Layer Protocols in Wireless Sensor Networks

Wireless sensor networks (WSNs) enable a wide variety of applications resulting in still increasing requirements for the protocols supporting the operations. The medium access control (MAC) layer protocols are essential for improving the performance of an application and its quality of service because MAC protocols influence channel capacity utilization, network delay, energy consumption, and scalability. The contribution of this paper is two novel cluster-based time division multiple access (TDMA) scheduling MACs for WSNs and an analysis of the mobility impact on both. The proposed MAC layer protocols support real time applications where the cluster-based scheduling improves the scalability and also improves the performance in varying network conditions. The paper presents the design, implementation and performance evaluation of the proposed cluster based TDMA scheduling algorithms green conflict free (GCF) and multicolor-GCF (M-GCF) for high complexity and high requirement applications of WSNs under both low and high mobility conditions. The comparative evaluation shows that the M-GCF algorithm has better slot sharing and less conflicts with reduced communication energy consumption, delay, and good throughput under static and low mobility conditions while the GCF algorithm has better performance in high mobility scenarios. The paper also defines the mobility threshold that decides the use of the GCF- and M-GCF algorithms according to the mobility requirement of application.     

Room electromagnetics

In analogy with the established discipline of room acoustics, various aspects of diffuse wideband microwave propagation in a room are treated. It is shown that an equivalent to Sabine's equation for reverberation time in a room is valid for the completely diffused field, depending only on the volume, the surface area, and an effective absorption coefficient. An exponential decay of the power as a function of the delay is a consequence of the assumptions. Furthermore, the concept of a reverberation distance is also valid. This is the distance from a transmitting antenna where the received diffuse, randomly scattered power equals the direct line-of-sight received power, such that the diffuse power dominates for distances larger than the reverberation distance. A number of measurements in a large room support the theory with an effective absorption coefficient of 0.5. The power delay profiles around the room from a transmitter in the ceiling vary only in the first arriving part of the impulse, whereas the tail, being dominated by the diffuse field, has the same power level for a given delay and the same decay rate all over the room. It is also a consequence of the theory that the diffuse fields incident on an antenna are uniformly distributed in angle.     

A Transmitter Architecture Based on Delta–Sigma Modulation and Switch-Mode Power Amplification

This brief presents a method of deploying RF switch-mode power amplification for varying envelope signals. Thereby the power amplifier can be operated as a switch with a high power efficiency as the result. The key idea is to transmit either a full RF period or none at all in such a way that the correct modulated RF signal is obtained after filtering. This is accomplished in a novel configuration of a low-pass DeltaSigma modulator using a phase modulated clock combined with a simple AND-gate. The designed modulator is easy to implement, displays very good linearity and offers time domain signals that promote the power efficiency of the power amplifier. The working principle is described through theory and simulations, and validation is done via measurements on a prototype of the modulator. Measurements on the prototype show that the presented modulator modulates a UMTS signal with more than 10-dB margin to the spectrum mask and EVM below 0.85% RMS (req<17.5%). Delta-sigma, power amplifier (PA), RF, switch mode, transmitter architecture, varying envelope.     

Demonstration of multi-core photonic crystal fibre in an optical interconnect

A novel microstructured fibre has been created for use in an optical interconnection system. The fibre has low crosstalk with a high density of cores corresponding to 1150 channels/mm/sup 2/. A repeating pseudorandom binary sequence has been used to demonstrate a four-channel transmit/receive system using vertical cavity surface emitting lasers as both emitters and detectors.     

On the benefits of location-based relay selection in mobile wireless networks

We consider infrastructure-based mobile networks that are assisted by a single relay transmission where both the downstream destination and relay nodes are mobile. Selecting the optimal transmission path for a destination node requires up-to-date link quality estimates of all relevant links. If the relay selection is based on link quality measurements, the number of links to update grows quadratically with the number of nodes, and measurements need to be updated frequently when nodes are mobile. In this paper, we consider a location-based relay selection scheme where link qualities are estimated from node positions; in the scenario of a node-based location system such as GPS, the location-based approach reduces signaling overhead, which in this case only grows linearly with the number of nodes. This paper studies these two relay selection approaches and investigates how they are affected with varying information update interval, node mobility, location inaccuracy, and inaccurate propagation model parameters. Our results show that location-based relay selection performs better than SNR-based relay selection at typical levels of location error when medium-scale fading can be neglected or accurately predicted.