合山电厂3个机组主厂房定向爆破拆除

介绍了广西合山电厂 1#～3# 机组主厂房定向爆破设计与施工.该工程不仅规模大、环境十分复杂、工期紧、难度高、风险性极强,最大特点是拆除发电设备与爆破同步进行施工.     

转运站框架式厂房的爆破拆除

合山电厂转运站待拆五层钢筋混凝土框架式厂房西侧与被保护的引风机房相隔仅 0 3m ,北侧与工具房相连 ,南侧与需要保护的油池相邻。爆破切口布置在二层 ,并把最后一排柱的爆破部位提高到引风机房顶部以上 0 5m处 ,避免了后坐对引风机房的影响。通过预处理 ,将厂房与工具房分离。架设防护结构 ,阻挡飞石 ,保护了油池。文中介绍了爆高和爆破参数的选择、预处理、起爆破网路设计和安全防护措施。     

Co^3＋—modified Surface of LiMn2O4 Spinel for its Improvementof Electrochemical Properties

Cobalt was used to modify the surface of spinel LiMn2O4 by a solution technique to produce Co^3 -modified surface material (COMSM). Cobalt was only doped into the surface of LiMn2O4 spinel. XPS(X-ray photoelectron spectroscopy) analysis confirms the valence state of Co^3 . COMSM has stable spinel structure and can prevent active materials from the corrosion of electrolyte. The ICP(inductively coupled plasma) determination of the spinel dissolution in electrolyte showed the content of Mn dissolved from COMSM was smaller than that from the pure spinel. AC impedance patterns show that the charge-transfer resistance (Rct) for COMSM is smaller than that for pure spinel. The particles of COMSM are bigger in size than those of pure spinel according to the micrographs of SEM(scanning electron microscopy). The determinations of the electrochemical characterization show that COMSM has both good cycling performance and high initial capacity of 124.1 mA/h at an average capacity loss of 0.19 mAh/g per cycle.     

当心新的"信息化陷阱"——合理规划、慎重选择"信息化"切入点

信息化巳成为当今的一大热点，文章以客观的角度分析了企业信息化应用的现状，阐述了如何合理规划、选择“信息化”切入点，对待实施信息化的企业具有重要的意义。     

反坦克导弹分布交互式训练仿真平台设计

文中阐述了反坦克导弹分布交互式训练仿真平台的设计与实现,概述了系统研制中一些主要环节的设计要点及实现方法.     

从数字看发展片式电容器面临的机遇与挑战

采用海关进、出口统计和行业生产统计资料,通过计算、分析,用数字来说明国内发展片式多层陶瓷电容器、片式钽电解电容器、片式铝电解电容器、片式有机薄膜电容器所面临的机遇与挑战,并对其国内市场需求总量、额,国产品在国内市场占有率等做出评估,为有关单位了解片式电容器的发展提供参考,为国产产品更有效地进入国内市场、促进其发展提供依据。     

龙滩尾水出口枯期围堰设计与施工

介绍龙滩水电站尾水出口工程枯期围堰的设计参数及计算过程,结合施工过程中的实际情况,总结得出土石子围堰的闭气方法和浆砌石主围堰堰体防渗的应注意几个问题。     

TAN/EOAN 组合导航技术

当飞行器超低空、低空在山区、平原、海面地带连续飞行作战时,由于地理条件的限制,所以GPS/INS组合导航或者其他导航系统(惯性导航系统、电光系统)的性能就会受到限制.在这种情况下,文中提出地形辅助导航和电光辅助导航技术,就能够克服这个困难,达到精确导航的目的.     

A Study of AlN Films Prepared by Arc Ion Plating

Hexagonal AlN films have been obtained by arc ion plating at different negative biases ,X-ray diffraction and scanning electron microscopy results show that AlN films with smooth surfaces and (002) preferred orientation are obtained at low biases ,whereas those with coarse surfaces and (100) preferred orientation are obtained at high biases,The formation mechanism of AlN is analyzed and the experiment results are discussed,The effect of bias on adhesion strength has also been examined.     

谐振式力传感器对其晶振频率稳定度的要求

为了寻找石英晶振频率稳定度对传感器影响的判据,根据石英谐振式力传感器的灵敏度阈值和量程与晶体的相关常数及结构参数间的关系,导出了反映谐振式力传感器研究水平的指标参数与晶体结构参数及晶振频率稳定度之间的关系式,为传感器的研究提供了依据。例如,欲制作量程阈值比达到105量级的传感器,所用晶振的频率稳定度必须优于108。