Reactive power compensation of an isolated hybrid power system with load interaction using ANFIS tuned STATCOM

This paper presents an adaptive neuro fuzzy interference system (ANFIS) based approach to tune the parameters of the static synchronous compensator (STATCOM) with frequent disturbances in load model and power input of a wind-diesel based isolated hybrid power system (IHPS). In literature, proportional integral (PI) based controller constants are optimized for voltage stability in hybrid systems due to the interaction of load disturbances and input power disturbances. These conventional controlling techniques use the integral square error (ISE) criterion with an open loop load model. An ANFIS tuned constants of a STATCOM controller for controlling the reactive power requirement to stabilize the voltage variation is proposed in the paper. Moreover, the interaction between the load and the isolated power system is developed in terms of closed loop load interaction with the system. Furthermore, a comparison of transient responses of IHPS is also presented when the system has only the STATCOM and the static compensation requirement of the induction generator is fulfilled by the fixed capacitor, dynamic compensation requirement, meanwhile, is ful-filled by STATCOM. The model is tested for a 1% step increase in reactive power load demand at t = 0 s and then a sudden change of 3% from the 1% at t = 0.01 s for a 1% step increase in power input at variable wind speed model.     

The influence of the coating technique on the high cycle fatigue life of alumina coated Al 6061 alloy

The primary objective of this study is to evaluate the influence of coating technique on the high cycle fatigue of an Al6061 alloy. Towards this purpose, Al6061 alloy fatigue samples have been coated with Al₂O₃ utilising the detonation spray, air plasma spray, micro arc oxidation and hard anodizing techniques. The high cycle fatigue life of these coated samples has been evaluated over a range of alternating stress values and compared with the fatigue life of the uncoated Al6061 alloy. It is observed that the detonation spray coated sample exhibits a higher fatigue life than the uncoated sample. In contrast, the samples coated using the other techniques exhibit poorer fatigue life compared to the uncoated sample especially at lower alternating stress values. These results have been explained on the basis of the nature of the coating-substrate interface which is strongly determined by the coating technique used to deposit the Al₂O₃ coatings.     

Temperature dependence of 1∕f noise mechanisms in silicon nanowire biochemical field effect transistors

The 1∕f noise of silicon nanowire biochemical field effect transistors is fully characterized from weak to strong inversion in the temperature range 100-300 K. At 300 K, our devices follow the correlated Δn-Δμ model. As the temperature is lowered, the correlated mobility fluctuations become insignificant and the low frequency noise is best modeled by the Δn-model. For some devices, evidence of random telegraph signals is observed at low temperatures, indicating that fewer traps are active and that the 1∕f noise due to number fluctuations is further resolved to fewer fluctuators, resulting in a Lorentzian spectrum.     

Quality,functionality, and shelf life of fermented meat and meat products: A review

Fermentation of meat is a traditional preservation method used widely for improving quality and shelf life of fermented meat products. Fermentation of meat causes a number of physical, biochemical, and microbial changes, which eventually impart functional properties, sensory characteristics, and nutritional aspects to these products and inhibit the growth of various pathogenic and spoilage microorganisms. These changes include acidification (carbohydrate catabolism), solubilization and gelation of myofibrillar and sarcoplasmic proteins of muscle, degradation of proteins and lipids, reduction of nitrate into nitrite, formation of nitrosomyoglobin, and dehydration. Dry-fermented sausages are increasingly being used as carrier of probiotics. The production of biogenic amines during fermentation can be controlled by selecting proper starter cultures and other preventive measures such as quality of raw materials, hygienic measures, temperature, etc.     

Microstructure and Property Evolution for Hot-Rolled and Cold-Rolled Austenitic Stainless Steel 316L

Grain boundary character distribution plays an important role in determining the functional and mechanical properties of polycrystalline materials. The aim of this work was to achieve improved coincident site lattice (CSL) fraction without increasing low angle grain boundary (LAGB) proportion. We utilized single-step thermo-mechanical processing route involving rolling followed by short heat treatment and compared the effect of rolling temperature. Our results indicated that rolling at elevated temperature led to significant increase in the fraction of special boundaries while keeping the fraction of LAGB very low, as desired. We conducted thermal stability of our sample-conditions at elevated temperatures for various lengths of time and found the microstructure of the samples to be stable up to 1000 °C. This study showed that even commercially suitable process (single step processing with short heat treatment duration) could lead to microstructure with considerable increase in CSL boundaries fraction, improved hardness values and good thermal stability.     

Mart Algorithms for Circular and Helical Cone-Beam Tomography

The present work is concerned with the evaluation of the performance and the efficient implementation of multiplicative algebraic reconstruction technique (MART) to reconstruct three-dimensional (3D) objects for two different source/detector trajectories. Three types of MART algorithms are tested on a numerical phantom (Defrise), and they are implemented on a 3D X-ray system of Vikram Sarabhai Space Centre (VSSC). Circular and helical cone-beam trajectories are used. The results are compared with convolution backprojection (CBP) algorithm for each trajectory. It is found that iterative algorithms perform better than their counterpart, the transform-based CBP algorithm, whenever tomography systems are ill-conditioned due to limited views and/or noisy projection data.     

A fully standardized method of synthesis of gold nanoparticles of desired dimension in the range 15 nm-60 nm

The citrate reduction method of synthesis of gold nanoparticles (AuNPs) as introduced by Frens has been standardized to enable one to prepare AuNPs of desired dimension by controlling the composition of the reactants. The standardization has been made through characterization of the nanoparticles by UV-vis spectroscopy and from the transmission electron microscopic (TEM) measurements. Linearity of the plot of the plasmon absorption maximum (lambda(max)) of the synthesized AuNPs against their diameter as measured from TEM, as well as the plot of lambda(max) with the fractional concentration of citrate in the reaction mixture provides a convenient and easy route to dictate the size of the synthesized AuNPs from a control on the composition of the reactants. The standardization reveals that a calculated composition of citrate (in terms of fractional concentration) in the reaction mixture produces AuNPs of a desired dimension within the range of 15-60 nm. The diameter of the synthesized gold nanoparticles can be confirmed simply from the UV-vis spectrophotometric technique. This essentially makes the use of costly TEM unnecessary, at least for the primary purposes.