Studies on the dechlorination and detoxificaton of organochlorine compounds. I. PCBs and PCNs

In the analysis of organochlorines such as polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs), levels of, for example, PCB concentration are often expressed as a ‘total PCB’ value, using a straight GC pattern-matching technique with electron capture detection. Such methods provide little information about the identity of the individual components. In the present study, preliminary investigations using dechlorination with a NiCl₂/NaBH₄ catalyst indicated that the technique offered a comprehensive method for the analysis of PCBs and PCNs, as well as a method of detoxification of the ‘priority pollutants’ . This paper reports the use of capillary column GC-MS with an ion trap detector (ITD^TM) for the analysis of a number of PCBs and PCNs, including the commercially produced Aroclor 1254 and 1221, employing this dechlorination technique.     

The new method of traceability of a force-balanced piston gauge used as primary vacuum standard

The force-balanced piston gauge is a primary vacuum standard developed in the 1990s. The general principle of the instrument was first presented in Ooiwa A (Metrologia 30 (1994) 607). Non-rotating piston is connected to an electronic dynamometer and centered by means of transient gas flow in a double tapered gap between piston and cylinder. More details about it can be found in Delajoud, Girard(NCSL International Workshop and Symposium 2002; Vakuum Forschung Praxis 15 (2003) 24) and Tesar, Prazak(Vacuum 67 (2002) 307).Czech Metrology Institute developed its own method of the primary traceability of this instrument through the determination of its effective area. In this paper, there will be described experimental setup of this comparison as well as the experimental results from the traceability calibrations of the effective area in gauge and absolute mode using experimental method of hydrostatic comparison with the classical rotating piston balances and a digital non-rotating piston balance. It will, of course, include the uncertainty budget of this way of traceability and the final uncertainty of the pressure generation of the instrument.     

Variation in fatty acid composition of ewes' milk during continuous transition from dry winter to natural pasture diet

The profile variations of approximately 70 fatty acids (FAs) in milk of ewes consuming total mixed rations (TMR) and grazing natural pasture were determined. Milk of ewes grazing pasture in May and September in the Slovak Republic contained 3-times more conjugated linoleic acid (CLA) (P < 0.001) and trans-vaccenic acid (TVA) (P < 0.001), and 2-times more α-linolenic acid (ALA) (P < 0.001) than that of ewes fed TMR. A doubling of the CLA and TVA contents of milk of ewes fed with TMR was achieved by changing to meadow hay containing a higher ALA content. Less availability of vegetation and lower ALA pasture content in summer (P < 0.001) caused a 2-fold decrease (P < 0.001) of CLA and TVA contents when compared with data obtained in May. With grass re-growth and an increase in pasture ALA content in September, the CLA and TVA contents rose to values similar to those obtained in May (P > 0.05). No significant differences in the FA composition in milk of ewes grazing on summer pasture at higher altitude were observed.     

Exhaust hood for steam turbines-single-flow arrangement

In the past, increased attention was given to the development of an optimal shape for the inlet part of LP turbine casings in SKODA POWER. A double-flow design is typically used for high power output turbines. An optimized shape for the internal diffuser has been found, which transforms the kinetic energy of steam into increased pressure, thus effectively increasing the thermodynamic efficiency of the stage. Some conclusions have been drawn from laboratory experiments, others derived directly from on-site measurements at power plants. The conclusions from the development of double-flow turbines form the basis for the design of the single-flow turbine arrangement. Single-flow design is typically used for lower output turbines. There are still some limitations in applying this arrangement. The designer needs to resolve the bearing position and how to ensure access to them. Reinforcing the ribs and supports are used, therefore, to ensure the rigidity of the entire casing. The optimization of the single-flow diffuser shape is therefore the subject of the study presented below.     

InP based semiconductor structures for radiation detection

We report the preparation of semi-insulating InP single crystals of p-type conductivity and intentionally undoped p-type epitaxial layers for radiation detection. We focus on (i) the growth of InP single crystals doped with copper by the Czochralski technique and their subsequent temperature annealing to convert them to a semi-insulating (SI) state of p-type conductivity, and (ii) the growth of thick (>10 μm) p-type InP layers by liquid phase epitaxy with an admixture of Pr and Dy. Grown layers and single crystals were examined by low-temperature photoluminescence spectroscopy, capacitance-voltage and temperature dependent Hall measurements. An efficient purification due to rare earth (RE) admixture has been observed and layers grown with the addition of Pr and Dy exhibit the change of electrical conductivity from n to p at certain RE concentration in the melt. Dominant acceptors responsible for conductivity conversion have been identified. Three types of detection structures exploiting the Schottky or Schottky like contacts on pure and SI p-type InP or exploiting the p–n junction were designed.     

Plasma processes at atmospheric and low pressures

In the last few decades there has been an intense development in non-equilibrium (“cold”) plasma surface processing systems at atmospheric pressure. This new trend is stimulated mainly to decrease equipment costs by avoiding expensive pumping systems of conventional low-pressure plasma devices. This work summarizes physical and practical limitations where atmospheric plasmas cannot compete with low-pressure plasma and vice-versa. As the processing conditions for atmospheric plasma are rather different from reduced pressure systems in many cases these conditions may increase final equipment costs substantially. In this work we briefly review the main principles, advantages and drawbacks of atmospheric plasma for a better understanding of the capabilities and limitations of the atmospheric plasma processing technology compared with conventional low-pressure plasma processing.     

Combined exposure to cyanobacterial biomass, lead and the Newcastle virus enhances avian toxicity

Under environmental conditions, wild birds can be exposed to multiple stressors including natural toxins, anthropogenic pollutants and infectious agents at the same time.This experimental study was successful in testing the hypothesis that adverse effects of cyanotoxins, heavy metals and a non-pathogenic immunological challenge combine to enhance avian toxicity. Mortality occurred in combined exposures to naturally occurring cyanobacterial biomass and lead shots, lead shots and Newcastle vaccination as well as in single lead shot exposure. Mostly acute effects around day 10 were observed. On day 30 of exposure, there were no differences in the liver accumulation of lead in single and combined exposure groups. Interestingly, liver microcystin levels were elevated in birds co-exposed to cyanobacterial biomass together with lead or lead and the Newcastle virus. Significant differences in body weights between all Pb-exposed and Pb-non-exposed birds were found on days 10 and 20. Single exposure to cyanobacterial biomass resulted in hepatic vacuolar dystrophy, whereas co-exposure with lead led to more severe granular dystrophy. Haematological changes were associated with lead exposure, in particular. Biochemical analysis revealed a decrease in glucose and an increase in lactate dehydrogenase in single and combined cyanobacterial and lead exposures, which also showed a decreased antibody response to vaccination.The combined exposure of experimental birds to sub-lethal doses of individual stressors is ecologically realistic. It brings together new pieces of knowledge on avian health. In light of this study, investigators of wild bird die-offs should be circumspect when evaluating findings of low concentrations of contaminants that would not result in mortality on a separate basis. As such it has implications for wildlife biologists, veterinarians and conservationists of avian biodiversity.     

Mineralogy of air-pollution-control residues from a secondary lead smelter: environmental implications

The mineralogy and solubility of air-pollution-control (APC) residues from a secondary lead (Pb) smelter have been studied on samples from the Príbram smelter, Czech Republic, recycling car batteries, with the emphasis on their potential environmental effect. The presence of dominant anglesite (PbSO4) and laurionite (Pb(OH)Cl) was observed in a sintered residue from after-burning chambers (800-1000 degrees C). In contrast, low-temperature Pb-bearing phases, such as KCl x 2PbCl2 and caracolite (Na3Pb2(SO4)3Cl), were detected in the major APC residue from bag-type fabric filters. Metallic elements, zinc (Zn), cadmium (Cd), and tin (Sn) were found homogeneously distributed within this residue. The formation of anglesite, cotunnite (PbCl2), (Zn,Cd)2SnO4, and (Sb,As)2O3 was observed during the sintering of this APC residue at 500 degrees C in a rotary furnace. The 168 h leaching test on filter residue, representing the fraction that may escape the flue gas treatment system, indicated rapid release of Pb and other contaminants. Caracolite and KCl x 2PbCl2 are significantly dissolved, and anglesite and cotunnite form the alteration products, as was confirmed by mineralogical analysis and PHREEQC-2 modeling. The observed Pb-bearing chlorides have significantly higher solubility than anglesite and, following emission from the smelter stack, can readily dissolve, transferring Pb into the environmental milieu (soils, water, inhabited areas).     

Reactive phenylbenzimidazole UV absorbers and their application to cellulose textiles

New types of reactive UV absorbers for applications to cellulose textiles have been prepared. These substances are condensation products of sulfobenzimidazolaniline, cyanuric chloride, and aminophenyl‐(2‐sulfethoxy)‐sulfone. They were applied to bleached, unbleached, as well as dyed cellulose textiles with the aim to increase the protection effect of these textiles against UV radiation. All the tested textiles showed a marked increase in the UV protection factor (UPF). The effects of the UV absorbers tested neither interfere with the function of fluorescent brighteners (FBs) nor affect the hue of the used dyestuffs. They exhibit synergistic effect in the protection effectiveness against UV radiation: the UV absorbers used together with dyestuffs and FBs have a higher UPF factor than is the sum of UPF contributions of the individual components. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009