Thermoelectric Power Studies on YBa2?xCaxCu3O7?δ System

The temperature dependence of the thermoelectric power of calcium substituted YBa_2–x Ca _x Cu₃O_7– pellets with 0x1.5 is presented between 60 K and 300 K. A metal–insulator transition was reported earlier by us in this system and was attributed to the ionic size-dependent localization effect. While the sign of thermoelectric power of all the calcium substituted samples was found to be positive, its magnitude increases significantly with calcium content in YBCO. The normal state thermoelectric power data of substituted YBa_2–x Ca _x Cu₃O_7– (0x1.5) are discussed in light of a two-band model originally proposed by Gottwick et al. for heavy fermion systems and later modified by Forro et al.     

Relative merits of ultrasonography, computed tomography and cholangiography in patients of surgical obstructive jaundice

Fifty consecutive patients with surgical obstructive jaundice were evaluated prospectively with ultrasonography (US), computed tomographic scans (CT scan) and cholangiography-percutaneous transhepatic cholangiography (PTC) or endoscopic retrograde cholangio-pancreaticography (ERCP). The diagnostic accuracy of ultrasound in defining the level of obstruction was 86% as compared to 86% and 94.8% for CT scan and cholangiography, respectively. To measure the etiology of the obstruction, the accuracy of ultrasound, CT scan and cholangiography were 84%, 86% and 75%, respectively. The sensitivity of CT scans and cholangiography in the diagnosis of choledocholithiasis was 100%, 81.8% and 90%, respectively, whereas specificity was 97%, 100% and 100%, respectively. Sensitivity for a diagnosis of malignant disease was 100% for both US and CT scans whereas specificity was 90% and 81%, respectively. Ultrasonography as a single radiological investigation is sufficient in the evaluation of the majority of patients with surgical obstructive jaundice. CT scan and cholangiography should be done only when US gives equivocal findings or if concomitant therapeutic procedures like basketing and stenting are also planned.     

Metal ion and guanine nucleotide modulations of agonist interaction in G-protein-coupled serotonin1A receptors from bovine hippocampus

1. The serotonin type 1A (5-HT1A) receptors are members of a superfamily of seven transmembrane domain receptors that couple to GTP-binding regulatory proteins (G-proteins). We have studied the modulation of agonist binding to 5-HT1A receptors from bovine hippocampus by metal ions and guanine nucleotide. 2. Bovine hippocampal membranes containing the 5-HT1A receptor were isolated. These membranes exhibited high-affinity binding sites for the specific agonist [3H]OH-DPAT. 3. The agonist binding is inhibited by monovalent cations Na+, K+, and Li+ in a concentration-dependent manner. Divalent cations such as Ca2+, Mg2+, and Mn2+, on the other hand, show more complex behavior and induce enhancement of agonist binding up to a certain concentration. The effect of the metal ions on agonist binding is strongly modulated in the presence of GTP-gamma-S, a nonhydrolyzable analogue of GTP, indicating that these receptors are coupled to G-proteins. 4. To gain further insight into the mechanisms of agonist binding to bovine hippocampal 5-HT1A receptors under these conditions, the binding affinities and binding sites have been analyzed by Scatchard analysis of saturation binding data. Our results are relevant to ongoing analyses of the overall regulation of receptor activity for G-protein-coupled seven transmembrane domain receptors.     

Advances in encapsulation technologies for the management of mercury-contaminated hazardous wastes

Although industrial and commercial uses of mercury have been curtailed in recent times, there is a demonstrated need for the development of reliable hazardous waste management techniques because of historic operations that have led to significant contamination and ongoing hazardous waste generation. This study was performed to evaluate whether the U.S. EPA could propose treatment and disposal alternatives to the current land disposal restriction (LDR) treatment standards for mercury. The focus of this article is on the current state of encapsulation technologies that can be used to immobilize elemental mercury, mercury-contaminated debris, and other mercury-contaminated wastes, soils, sediments, or sludges. The range of encapsulation materials used in bench-scale, pilot-scale, and full-scale applications for mercury-contaminated wastes are summarized. Several studies have been completed regarding the application of sulfur polymer stabilization/solidification, chemically bonded phosphate ceramic encapsulation, and polyethylene encapsulation. Other materials reported in the literature as under development for encapsulation use include asphalt, polyester resins, synthetic elastomers, polysiloxane, sol-gels, Dolocrete, and carbon/cement mixtures. The primary objective of these encapsulation methods is to physically immobilize the wastes to prevent contact with leaching agents such as water. However, when used for mercury-contaminated wastes, several of these methods require a pretreatment or stabilization step to chemically fix mercury into a highly insoluble form prior to encapsulation. Performance data is summarized from the testing and evaluation of various encapsulated, mercury-contaminated wastes. Future technology development and research needs are also discussed.     

Characterization and photoluminescence studies on hydrothermally synthesized Mn-doped barium titanate nano powders

Manganese doped cubic barium titanate nanocrystals with [Mn/Ti] mole percent varying from 0.1 to 3 were prepared through hydrothermal route at 150 °C. The mean crystallite diameters obtained for different Mn concentrations varied within 26 to 30 nm. TEM of a typical sample showed most of the particles as single crystallites (particle size 15-40 nm) with some weakly agglomerated particles. The photo luminescent (PL) spectra of each sample showed a sharp peak in the blue band centered approximately at 464 nm and a weaker peak in the green band centered nearly at 494 nm. The luminescent efficiency passed through maxima for the sample with 2% [Mn/Ti] molar ratio. Effect of calcination temperature in the range of 200 to 600 °C on PL spectra showed that the intensity of peak corresponding to blue region decreased with the increase in calcination temperature from 200 to 600 °C and for the sample calcined at 600 °C, only a broad peak corresponding to green luminescence region was observed.     

A Case‐Based Reasoning system for complex medical diagnosis

A Case‐Based Reasoning (CBR) system for medical diagnosis mimics the way doctors make a diagnosis. Given a new case, its accuracy in practice depends on successful retrieval of similar cases. CBR systems have had some success in dealing with simple diseases because of the robustness of their case base. However, their diagnostic accuracy suffers when dealing with complex diseases particularly those that involve multiple domains in medicine. An example of such a condition is Premenstrual syndrome (PMS) as it falls under both gynaecology and psychiatry. To address this issue, the paper proposes a CBR‐based expert system that uses the K‐nearest neighbour (KNN) algorithm to search k similar cases based on the Euclidean distance measure. The novelty of the system is in the design of a flexible auto‐set tolerance (T), which serves as a threshold to extract cases for which similarities are greater than the assigned value of T. A prototype software tool with a menu‐driven Graphical User Interface (GUI) has been developed for case input, analysis of results, and case adaptation within the system. Finally, the performance of the tool has been checked on a set of real‐world PMS cases.     

Photoconductivity in CuInSe2 films

CulnSe₂ films with different Cu/In ratios (0.4–1.2) were deposited on glass substrates by three source evaporation techniques. The films were polycrystalline in nature with partially depleted grains. Photoconductivity in the films was measured in the temperature range 170–370 K. The data at low temperatures (T < 300 K) were analyzed by using the grain boundary trapping model with monovalent trapping states. The intercrystalline barrier height in dark varied within 0.13 and 0.08 eV with the variation of Cu/In within 0.4 and 1.18. The variation of the barrier height with the intensity of the incident photons in the range 10–75 mW / cm² was analyzed to understand the carrier detrapping effect in the films under various illumination levels.     

Fuzzy controlled backpropagation neural network for tool condition monitoring in face milling

The performance of a fuzzy controlled backpropagation neural network has been studied to predict the tool wear in a face milling process based on simple process parameters and sensor signal features. The results show the potentiality of the method in comparison to the standard backpropagation neural network and one of its variants. The speed of convergence, accuracy of prediction and total time of system development make fuzzy controlled backpropagation an attractive technique amenable for online tool condition monitoring.     

Gold Nanoparticle–Protein Agglomerates as Versatile Nanocarriers for Drug Delivery

The fabrication of a versatile nanocarrier based on agglomerated structures of gold nanoparticle (Au NP)–lysozyme (Lyz) in aqueous medium is reported. The carriers exhibit efficient loading capacities for both hydrophilic (doxorubicin) and hydrophobic (pyrene) molecules. The nanocarriers are finally coated with an albumin layer to render them stable and also facilitate their uptake by cancer cells. The interaction between agglomerated structures and the payloads is non‐covalent. Cell viability assay in vitro showed that the nanocarriers by themselves are non‐cytotoxic, whereas the doxorubicin‐loaded ones are cytotoxic, with efficiencies higher than that of the free drug. Transmission electron microscopy and fluorescence microscopy along with flow cytometry analysis confirm the uptake of the drug‐loaded nanocarriers by a human cervical cancer HeLa cell line. Field‐emission scanning electron microscopy reveals the formation of apoptotic bodies leading to cell death, confirming the release of the payloads from the nanocarriers into the cell. Overall, the findings suggest the fabrication of novel Au NP–protein agglomerate‐based nanocarriers with efficient drug‐loading and ‐releasing capabilities, enabling them to act as multimodal drug‐delivery vehicles.