Codeposition of nanocrystalline aluminides on a copper substrate

The present study concerns codeposition of nanocrystalline aluminide particles (NbAl₃ and Cu₉Al₄) along with electrodeposition of Cu on a Cu substrate. It is shown that the success of codeposition primarily depends on the selection of an appropriate electrolyte. Following codeposition under an optimum deposition condition, the microstructure, phase identity and composition of the deposit layer have been studied. In addition, microhardness and electrical resistivity of the deposit have been determined. A suitable correlation of the microstructure and composition of the deposit with its properties suggests that codeposition of NbAl₃ is more effective in enhancing the hardness. However, codeposition beyond a limit adversely affects the electrical conductivity. The optimum conditions for codeposition to enhance hardness without adversely affecting conductivity have been determined. Finally, it is predicted codeposition could be a suitable technique for developing a surface composite microstructure with uniform distribution of nanocrystalline aluminide particles.     

On the dispersion equation of Love waves in a porous layer

Summary The paper is concerned with the propagation of Love waves in a porous layer over an inhomogeneous half-space due to a point source. The dispersion equation for Love waves in a porous layer has been derived. The effects of porosity and inhomogeneity in the half-space have been shown graphically on the dispersion curves. The theory pointed out by Biot for the porous medium has been applied to solve the problem with the help of Green's function technique.With 4 Figures     

PHYSIOLOGICAL AND MORPHOLOGICAL CHANGES IN IMMOBILIZED L. PLANTARUM NCIM 2084 CELLS DURING REPEATED BATCH FERMENTATION FOR PRODUCTION OF LACTIC ACID

L. Plantarum NCIM 2084 cells are homofermentative, essentially producing lactic acid as the main end product of glucose fermentation. Prolonged use through repeated batch fermentation with the cells of L. plantarum immobilized on chitosan treated polypropylene matrix showed a shift in the metabolic pathway from the homofermentative to heterofermentative, accompanied by morphological changes in immobilized cells from the normal rod shape to the coccoid shape. These changes appear to be related to a shift in the bacterial cell metabolism, resulting in a decrease in lactic acid yields.     

Sulphated polysaccharides from Indian samples of Enteromorpha compressa (Ulvales,Chlorophyta): Isolation and structural features

Heteroglycan and xyloglucan rich fractions were extracted from Indian samples of Enteromorpha compressa in 25% yield by sequential extractions with water and alkali. This heteroglycan is sulfated and has an apparent molecular mass of 55 kDa. Chemical structural analysis of this polysaccharide revealed a branched structure having 1,4- and 1,2,4-linked rhamnose 3-sulphate, 1,4-linked glucose, 1,3- and 1,6- linked galactose, 1,4- and terminally linked glucuronic acid and 1,4-linked xylose partially sulfated on O-2. Chemical and spectroscopic analysis showed that the 4-M KOH extracted hemicellulosic fraction contained an unusual β-(1,4)-linked linear xyloglucan. Enzyme hydrolysis and analysis of the resulting fragments by matrix-assisted laser desorption ionization-time of flight-mass spectrometry (MALDI-TOF-MS) showed that this linear polymer contained partially sulfated Glc₃Xyl₂ or Glc₄Xyl₂ as oligomeric building subunits.     

Interesting aspects of the analysis of resistivity in Li irradiated Bi-2212

Differently heat treated and 55 MeV Li³⁺ beam irradiated Bi₂Sr₂Ca₁Cu₂O_8+δ (Bi-2212) high temperature superconductors have been studied from the analysis of resistivity in the normal state as well as near the superconducting transition. For all the unirradiated and irradiated samples the so-called linear temperature dependence of the normal state resistivity, in a wide temperature range, can well be understood within the variable range hopping (VRH) conduction scenario. Near and above the bulk superconducting transition, the fluctuation enhanced conductivity (paraconductivity) analysis shows a noteworthy modification of the conduction process due to radiation induced defects.     

GALDS: a complete framework for designing multiclock ASICs and SoCs

A Globally Asynchronous, Locally Synchronous (GALS) system with dynamic voltage and frequency scaling can use the slowest frequency possible to accomplish a task with minimal power consumption. With the mechanism for implementing dynamic voltage scaling at each synchronous domain left up to the designer, our Globally Asynchronous, Locally Dynamic System (GALDS) provides a top-down, system-level means to maximize power reduction in an integrated circuit and facilitate system-on-a-chip (SoC) design. Our solution includes three distinct components: a novel bidirectional asynchronous FIFO to communicate between independently clocked synchronous blocks , an all-digital dynamic clock generator to quickly and glitchlessly switch between frequencies and a digitally controlled oscillator to generate the global fixed frequency clocks required by the all-digital dynamic clock generator. In addition to being capable of reducing power consumption when combined with dynamic voltage scaling, a GALDS design benefits from numerous other advantages such as simplified clock distribution, high performance operation and faster time-to-market through the modular nature of the architecture.     

Mechanical and tribological behavior of alumina and alumina‐CNT reinforced hybrid unsaturated polyester composites

Micro‐ and nano‐scale wear behavior of alumina vis‐á‐vis alumina‐carbon nanotube‐reinforced hybrid composites has been studied. In comparison to the pristine alumina, the alumina‐carbon nanotube hybrid reinforcement resulted in reduced scratch depth and lower frictional coefficient. Addition of carbon nanotube has effectively modified the pristine alumina into a superior wear resistant filler. POLYM. COMPOS., 37:1577–1586, 2016. © 2014 Society of Plastics Engineers     

Dielectric properties of EVA/LDPE TPE system: Effect of nanosilica and controlled irradiation

The pristine nanosilica particles were melt‐blended with a model low‐density polyethylene–ethylene vinyl acetate thermoplastic elastomers (TPE) system by varying the sequence of addition and nanosilica contents. Bis‐[3‐(triethoxysilyl)propyl] tetrasulfide (Si‐69) was used to improve the state of dispersion of nanosilica particles in one of the compositions. The dielectric properties of the TPE systems are influenced remarkably by loadings of silica, variation of sequence of addition of ingredients during mixing, addition of Si‐69, and controlled electron beam irradiation. The effects of interfacial and orientation polarization on the permittivity and the loss tangent were studied by dielectric analyses. These were correlated with the structures of various nanocomposites. An attempt has also been made to support the dielectric results by volume resistivity measurements, measurements of breakdown voltage, and swelling–deswelling kinetic results. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers