低银医用X光胶片的研制

对几种增黑剂进行了筛选实验研究，选用了两种增黑剂组合使用，提高了遮盖力，使医用Ｘ光胶片涂布银量由原业的９ｇ／ｍ２降到了６．８ｇ／ｍ２，与美国医用Ｘ光胶片涂布银量（６．７ｇ／ｍ２）相当，照相性能不低于国产医用Ｘ光胶片。     

Circulating angiotensin II and renal sodium handling in man: a dose-response study

1. Animal studies have shown that angiotensin II has a biphasic effect on urinary sodium excretion. To examine whether this is also true in man, we studied seven salt-replete male subjects in a single-blind placebo-controlled manner. 2. While undergoing maximum diuresis, subjects were infused with 0, 1, 2, 5 or 10 ng of angiotensin II min-1 kg-1 over 80 min. Subjects were studied while seated, and stood every 20 min for urine collection. 3. Angiotensin II produced a dose-dependent antidiuretic effect. The urine flow rate, in ml/min expressed as the change from baseline with increasing dose of angiotensin, was: +3.4 +/- 1.77, -1.26 +/- 0.49 (P < 0.05), -2.75 +/- 1.23 (P < 0.05), -4.21 +/- 0.82 (P < 0.05) and -6.51 +/- 1.07 (P < 0.01). 4. In contrast, the effect of angiotensin II on sodium excretion showed a flat dose-response curve beyond 5 ng min-1 kg-1. The urinary sodium excretion, in mumol/min expressed as the change from baseline with increasing dose of angiotensin, was: 9.5 +/- 21.2, -18.9 +/- 29.6, -37.0 +/- 11.6 (P < 0.05), -67.7 +/- 19.6 (P < 0.01) and -63.8 +/- 14.3 (P < 0.01). 5. The fractional distal reabsorption of sodium, determined by using the lithium clearance technique, showed a rise with all doses of angiotensin II used and reached statistical significance with the top two doses. 6. Unlike antidiuresis, antinatriuresis after graded doses of angiotensin II in human subjects showed a flat dose-response curve beyond 5 ng min-1 kg-1. Pressor doses of angiotensin II also have a significant effect on the distal tubule in promoting sodium reabsorption.     

Fabrication and Characterization of Carbon Nanotube–Titanium Nitride Composites with Enhanced Electrical and Electrochemical Properties

This work reports the fabrication and the characterization of a new composite consisting of multiwalled carbon nanotubes (CNTs) and conducting titanium nitride (TiN) with a higher specific surface area ( S _BET), enhanced electrical conductivity (σ), and specific capacitance. With increasing CNT content, the electrical conductivity and electrochemical performance of the CNT–TiN composites gradually increase. In the presence of 5 wt% (12.0 vol%) CNTs, the electrical conductivity and the weight-specific capacitance of CNT–TiN composite are increased by 3.6 times and 54.8% compared with pure TiN, respectively.     

Mesh network resiliency using GMPLS

The generalized multiprotocol label switching (GMPLS) is being developed as the control plane for the evolving photonic network. We describe how GMPLS can be used with mesh networks to provide efficient network resiliency. In particular we examine the key aspects of GMPLS that are used to support protection and restoration. We also study the various protection and restoration techniques, and we highlight the tradeoffs between recovery time and resource redundancy     

汽车空调冷凝器腐蚀试验的表征与评价

介绍了汽车空调冷凝器的腐蚀试验程度及方法，对试验后的冷凝器进行了密封性检查，并用光学显微镜和扫描电镜检测和分析了材料的显微结构，焊接质量，腐蚀性质及其腐蚀深度等。通过对冷凝器的宏微观检查与表征，评价了冷凝器质量的优劣，提出了改进措施与建议。     

热轧高强钢平整机辊径参数设计技术研究

基于高强钢平整机的生产工艺特点,结合板形与辊耗问题,将带材的出口前张力与辊间压力横向分布都均匀作为目标函数,把保证所有被平整高强钢产品的机械性能满足产品大纲要求作为约束条件,提出了一套针对热轧高强钢平整机的工作辊与支承辊辊径参数设计模型.其研究结果对指导宝钢分公司1880 mm热轧平整机的工艺参数的确定与技术谈判发挥了重要作用,并具有进一步的推广价值.     

Magnetic induction micromachine-part I: Design and analysis

Most microscale electric and magnetic machines studied in the last decade lack the power density to support many practical applications. This paper introduces a design for a magnetic induction machine that offers power densities in excess of 200 MW/m/sup 3/ and efficiencies of up to 50%, while providing more than 10 W of mechanical power. This is a substantial performance increase in MEMS electromagnetic machines studied to date.