Structural optimization strategies to design green products

This paper addresses the need for a structured approach to environmental assessment and improvement. We propose a computer-aided methodology, named Eco-OptiCAD, based on the integration of Structural Optimization and Life Cycle Assessment (LCA) tools. Eco-OptiCAD supports the designer during product development, highlighting when and where the core of the environmental impact lies. Furthermore, it provides effective tools to address such impacts, improving the original product, while ensuring structural and functional requirements. It foresees the synergic use of (1) virtual prototyping tools, such as 3D CAD, Finite Element Analysis (FEA) and Structural optimization, (2) function modeling methodology and (3) Life Cycle Assessment (LCA) tools. The kernel of the methodology is constituted by a set of optimization strategies and a module, named Life Cycle Mapping (LCM). In particular, we have conceived ten optimization strategies converting environmental objectives and constraints into structural and geometrical parameters. They enable the designer to generate alternative green scenarios according to the triad shape–material–production. The LCM tool has been specifically developed to easily trace the growth of environmental impacts throughout the product's life cycle and allow the user to focus his effort on the most relevant aspects. Thanks to the integration of the structural optimizer with an LCA map, the designer becomes aware of the consequences that each change in the geometry, the material or the manufacturing process will produce on the environmental impact of the product throughout its life cycle. With a complete view of the product life cycle, the designer can improve a single phase, while retaining a global perspective; thus avoiding the possibility of gaining a local green improvement at the cost of a global increase in environmental impacts.     

Preparation and characterization of trilobal activated carbon fibers

The objective of this research was to evaluate the effectiveness of several different methods for controlling the pore size and pore size distribution in activated carbon fibers. Variables studied included fiber shape, activation time, and the addition of small amounts of silver nitrate. Pure isotropic pitch and the same isotropic pitch containing 1 wt.% silver were melt spun to form fibers with round and trilobal cross sections. These fibers were then stabilized, carbonized, and activated in carbon dioxide. Field emission scanning electron microscopy (FE SEM), electron dispersive spectra (EDS), and wavelength dispersive spectra (WDS) were used to monitor the size and distribution of the silver particles in the fibers before and after activation. Each of these analyses showed that the distribution of silver particles was extremely uniform before and after activation. The fibers were also weighed before and after activation to determine the percent burn-off. The BET specific surface areas of the activated fibers were determined from N₂ adsorption isotherms measured at −196 °C. The results showed that round and trilobal fibers with equivalent cross-sectional areas yielded similar burn-off values and specific surface areas after activation. Also, activation rates were found to be independent of CO₂ flow rate. The porosity of the activated fibers depended on the total time of activation and the cross-sectional area of fibers. The N₂ adsorption measurements showed that the activated fibers had extremely high specific surface areas (greater than 3000 m²/g) and high degrees of meso- and macro-porosity. FE SEM was also used to investigate surface texture and size of pore openings on the surfaces of the activated fibers. The photos showed that silver particles generated surface macro- and mesopores, in agreement with the inferences from N₂ adsorption measurements.     

Phytotoxic properties of cnicin,a sesquiterpene lactone fromcentaurea maculosa (spotted knapweed)

Water and solvent extracts from the aerial tissues ofCentaurea maculosa, spotted knapweed, inhibited the root growth of lettuce. Column chromatography and lettuce bioassay of a chloroform extract led to the isolation of cnicin, a sesquiterpene lactone. Pure cnicin was bioassayed at 0, 1, 2, 4, 6, 8, and 10 mg/5 ml water with lettuce, created wheatgrass, bluebunch wheatgrass, rough fescue, western larch, lodgepole pine, and spotted knapweed. Germination was inhibited at one or more concentrations for all species except lodgepole pine and spotted knapweed. Growth, particularly of the roots, was retarded between 1 and 4 mg of cnicin. Lettuce, bluebunch wheatgrass, and spotted knapweed were inhibited significantly at all concentrations tested.     

Solvent free liquid phase oxidation of benzyl alcohol using Au supported catalysts prepared using a sol immobilization technique

Solvent free oxidation of benzyl alcohol was investigated in the absence of a base using Au catalysts prepared by sol immobilization on titania and carbon supports. Comparison between the Au supported catalysts revealed that activity and distribution of products was dependent on the nature of support and heat treatment. Specifically, heat pre-treatment of the Au catalysts has a beneficial effect in terms of activity, but is detrimental in terms of selectivity to the benzaldehyde. We conclude that sol immobilization is a suitable technique for preparing gold catalysts with small particle size and narrow particle size distributions and very high activity and selectivity for benzyl alcohol oxidation.     

Lithium-deficient LiYMn2O4 spinels (0.9 ≤ Y < 1): Lithium content, synthesis temperature, thermal behaviour and electrochemical properties

Lithium-deficient Li_YMn₂O₄ spinels (LD-Li_YMn₂O₄) with nominal composition (0.9 ≤ Y < 1) have been synthesized by melt impregnation from Mn₂O₃ and LiNO₃ at temperatures ranging from 700 °C to 850 °C. X-ray diffraction data show that LD-Li_YMn₂O₄ spinels are obtained as single phases in the range Y = 0.975-1 at 700 °C and 750 °C. Morphological characterization by transmission electron microscopy shows that the particle size of LD-Li_YMn₂O₄ spinels increases on decreasing the Li-content. The influence of the Li-content and the synthesis temperature on the thermal and electrochemical behaviours has been systematically studied. Thermal analysis studies indicate that the temperature of the first thermal effect in the differential thermal analysis (DTA)/thermogravimetric (TG) curves, T_C1, linearly increases on decreasing the Li-content. The electrochemical properties of LD-Li_YMn₂O₄ spinels, determined by galvanostatic cycling, notably change with the synthesis conditions. So, the first discharge capacity, Q_disch., at C rate increases on rising the Li-content and the synthesis temperature. The sample Li_0.975Mn₂O₄ synthesized at 700 °C has a Q_disch. = 123 mAh g⁻¹ and a capacity retention of 99.77% per cycle. This LD-Li_YMn₂O₄ sample had the best electrochemical characteristics of the series.     

Evaluation of the antimicrobial action of honey against Staphylococcus aureus, Staphylococcus epidermidis, Pseudomonas aeruginosa, Escherichia coli, Salmonella enteritidis, Listeria monocytogenes and Aspergillus niger. Evaluation of its microbiological charge

The evaluation of the microbiological charge present in Costa Rican samples as the evaluation of its antimicrobial activity over different microorganisms, including those associated to wound infections, will allow to emit criteria referred to its use in therapeutic treatments, specially as alternative therapy for cases involving antibiotic resistant bacteria. The microbiological charge of 25 honey samples, acquired in Costa Rican markets was evaluated through several indicators including total plate aerobic count, total plate anaerobic count, total aerobic spore count, total anaerobic spore count and molds and yeast count. Also, samples were inoculated in tubes with chopped meat media and plated in egg yolk agar in order to determine the presence of Clostridium botulinum. For the antimicrobial activity evaluation, the diffusion method in Muller Hinton agar was performed, testing different honey concentrations (100, 75, 50, 25, 12,5 and 6,25 % v/v) against Staphylococcus aureus (ATCC 25923), Staphylococcus epidermidis (UCR 2902), Pseudomonas aeruginosa (ATCC 9027), Escherichia coli (ATCC25922), Salmonella enteritidis (ATCC 13076), Listeria monocytogenes (ATCC 19116) and Aspergillus niger. The results obtained for the microbiological characterization of honey show that 91% of samples had counts equal or lower than 1,0 x 10(1) CFU/g. No positive result was obtained for the isolation of C. botulinum. 24 of the samples analyzed inhibited the growth of S. aureus even in a 25% v/v concentration, nevertheless, A. niger was no inhibited by any of the samples tested.     

Synthesis,structure, and characterization of the thorium zirconolite CaZr1-xThxTi2O7 system

A series of zirconolite ceramics with composition CaZr_1-xTh_xTi₂O₇ (Δx = 0.10) were reactively sintered at 1350°C for 20 h, in air (0 ≤ x ≤ 0.60) and 5% H₂/N₂ (0 ≤ x ≤ 0.40). A sample with composition corresponding to x = 0.20 was also produced by hot isostatic pressing (HIP) at 1300°C and 100 MPa for 4 hours. Th⁴⁺ immobilization was most readily achieved under oxidizing conditions, with Th⁴⁺ preferentially incorporated within a pyrochlore-structured phase in the range 0.10 ≤ x ≤ 0.50, yet formation of the zirconolite-4M polytype was not observed. We report the novel synthesis of single-phase pyrochlore with nominal composition CaZr_0.40Th_0.60Ti₂O₇ when targeting x = 0.60. Th⁴⁺ incorporation under reducing conditions produced a secondary Th-bearing perovskite, comprising 24.2 ± 0.6 wt% of the phase assemblage when targeting x = 0.40, alongside 8.8 ± 0.3 wt% undigested ThO₂. Under reducing conditions, powder XRD data were consistent with zirconolite adopting the 3T polytype structure. The sample produced by HIP presented a nonequilibrium phase assemblage, yielding a major phase of zirconolite-2M alongside accessory Th⁴⁺-bearing phases ThTi₂O₆, ThO₂, and perovskite. These data highlight the efficacy of Th⁴⁺ as a Pu⁴⁺ surrogate, with implications for the formation of Zr-stabilized Th-pyrochlore phases as matrices for waste with elevated Th⁴⁺ content.     

Rheological,thermal and morphological properties of polyethylene terephthalate/polyamide 6/rice husk ash composites

This work deals with the rheological, morphological, and thermal properties of composites having poly(ethylene terephthalate) (PET), polyamide-6 (PA6), and their blends as matrices, and rice husk ash (RHA) as a filler. The study determines the effect of composition on the change in viscosity and rate of degradation during processing in a torque rheometer. Our data indicates that thermal stability and degradation during processing depend on matrix composition and filler concentration. SEM micrographs show both partial adhesion of the filler to the matrices and filler pullout. Optical microscopy shows particle agglomeration and that agglomerate size increased with filler content. FTIR investigates the shifting of absorption bands of PET/PA6 composite after the addition of RHA and attributes the selective dispersion of RHA to the formation of hydrogen bonds. Our data supports the idea that filler employed here is an option to develop polymer composites with improved properties.