Secondary electron imaging in the variable pressure scanning electron microscope

Secondary electron imaging is not possible in the variable pressure scanning electron microscope because the mean free path of the secondaries in the gas is too short to permit them to reach the detector. This paper therefore investigates an alternative strategy for producing an image containing significant amounts of secondary electron contrast. This involves modifying the microscope by the addition of a biased electrode above the sample and then collecting a specimen current signal. This system, originally described by Farley and Shah (1988), is found to produce true secondary electron detail over a wide range of conditions.     

Fixed bed and reduced lumped diffusion model parameter estimation of copper biosorption using Aspergillus niger biomass

In this study, fixed bed model and reduced lumped diffusion model were used to explain biosorption behaviour of Cu (II) in a continuous column of Aspergillus niger biomass. The breakthrough time was evaluated for both models as a function of influent flow rate and bed height for a feed solution at 10 mg/L metal ion concentration and compared with experimental results. MATLAB was used to solve the partial differential equations and breakthrough curve was plotted. The breakthrough time obtained experimentally was comparable with data evaluated by these models. It was observed that fixed bed model and reduced lumped diffusion model can predict column dynamics more accurately at high flow rate, that is, at 9.8 mL/min for all (2.1, 3.1, and 4.1 cm) bed heights. © 2011 Canadian Society for Chemical Engineering     

Quality of bull spermatozoa after preparation by single-layer centrifugation

The present study aimed to evaluate the effect of single-layer centrifugation (SLC) through a species-specific colloid (Androcoll-B; patent pending, J. M. Morrell) on bull sperm quality. Computer-assisted sperm analysis of motility and flow cytometric analysis of sperm viability (SYBR-14/propidium iodide staining), chromatin integrity (acridine orange staining), reactive oxygen species production [Hoechst 33258-hydroethidine-2′,7′-dichlorodihydrofluorescein diacetate (HO-HE-DCFDA) staining], mitochondrial membrane potential (staining with JC-1 probe), and protein tyrosine phosphorylation (specific antibody staining) were performed on unselected and SLC-selected sperm samples. Single-layer centrifugation of bull spermatozoa resulted in the selection of a sperm population that had high mitochondrial membrane potential, a higher content of phosphorylated protein, and more reactive oxygen species than control samples. Sperm chromatin damage was lower in the SLC samples although sperm viability and motility did not differ between SLC samples and controls. These observations suggest that SLC of bull semen in a soybean-containing extender improved some, but not all, parameters of sperm quality.     

Single Step Synthesis of Nitro‐Functionalized Hydroxyl‐Terminated Polybutadiene

The paper reports the energization of Hydroxyl‐Terminated Polybutadiene (HTPB) by functionalizing explosophore  NO₂ over the HTPB backbone, resulting in the formation of conjugated nitro‐alkene derivative of HTPB. A convenient, inexpensive and efficient “one pot” procedure of synthesizing Nitro‐Functionalized Hydroxyl‐Terminated Polybutadiene (Nitro‐HTPB) is reported. The reaction was carried out with sodium nitrite and iodine. To retain the unique physico‐chemical properties of HTPB, functionalization by  NO₂ group was restricted to 10 to 15 % of double bonds. The Nitro‐HTPB was characterized by FTIR, ¹H NMR, VPO, DSC, TGA etc. The polymer has shown good thermal stability for practical applications. The kinetic parameters for the decomposition of Nitro‐HTPB at 150–300 °C were obtained from non‐isothermal DSC data.     

Surveillance of the quality of turmeric powders from city markets of India on the basis of curcumin content and the presence of extraneous colours

Curcumin, the principal curcuminoid of turmeric, is responsible for its yellow colour and serves as a measure of turmeric quality. The Prevention of Food Adulteration (PFA) Act of India allows only Curcuma longa L. for the production of turmeric powder and prohibits addition of any foreign matter/artificial colour, but it does not specify a minimum curcumin content. The present surveillance was undertaken to study the quality of loose versus branded turmeric powders vis-à-vis curcumin content and the presence of unwarranted extraneous colours from city markets in India using a newly developed two-dimensional high-performance thin-layer chromatography (2D-HPTLC) method. The results show that curcumin content in branded samples ranged from 2.2% to 3.7%, while non-branded samples had from 0.3% to 2.6%. Though none of the branded turmeric powders contained artificial colours, 17% of loose powders showed the presence of extraneous colour metanil yellow, in the range 1.0–8.5 mg g^?1, which may pose health threats. Low curcumin content in the analysed samples may be due to mixing of other curcuma species or their curcumin-depleted matrices and foreign starches as cheaper alternatives. This is supported by the fact that major Indian turmeric trade types are known to possess curcumin contents ranging from 2.1% to 8.6%, with an average of 4.8%. There is thus an urgent need to prescribe realistic curcumin limits for turmeric powder, otherwise there is no obligation on the part of traders to stick to any minimum levels and consumers will keep on getting this nutrient-depleted household spice.     

Parametric study of aluminium alloy fouling in marine environment using RSM technique

ABSTRACT

Fouling is known to be a prominent industrial problem which is greatly affected by parameters like temperature, time and flowrate. The aim of this work was to simulate the fouling process in AA 6061 by developing a model through Minitab 16 and evaluate the models. Box Behnken design of Response surface methodology was applied for modelling and optimization of fouling propensity in artificial sea water. A response surface model was obtained and Analysis of Variance was performed to test the significance of the model. Fouling propensity was found in terms of weight gain. An experimental rig consisting of a recirculating loop mimicking the industrial conditions of fouling was used in the study. SEM analysis shows uneven deposits on the metal surface. Sharp, irregular deposits pressed deep into the metal was observed. The finding of this work would enable us to evaluate the individual and interactive effects of the parameters.     

Design data for solar heating of air Using a Heat Exchange and Storage System

An arrangement for heating with solar energy by means of a heat exchanger and storage coupled to the two water heaters has been described^*. In the present paper, the amount of the heat transferred from water to air in the shell-and-tube heat exchanger and the temperature of the outgoing air have been estimated by considering various parameters, viz. flow rate and temperature of incoming air, temperature of incoming and outgoing water, length and diameter of tubes, etc. Both natural and forced convection mode of heat transfer have been considered.

Under boundary conditions of free convection, heat transfer would be rapid and efficient with a possible reduction in the pipe length. The maximum permissible limit of pressure drop per foot of each tube for pipes of different diameters at different Reynolds numbers has been given.

As conditions of drying vary from material to material, the data presented will help in arriving at the final design of the shell-and-tube heat exchanger to be used in drying a particular material.     

Performance analysis of a variable‐gain amplify‐and‐forward relayed mixed RF‐FSO system

In this work, an amplify‐and‐forward variable‐gain relayed mixed RF‐FSO system is studied. The considered dual‐hop system consists of a radio frequency (RF) link followed by a free space optical (FSO) channel. The RF link is affected by short‐term multipath fading and long‐term shadowing effects and is assumed to follow the generalized‐K fading distribution that approximates accurately several important distributions often used to model communication channels. The FSO channel experiences fading caused by atmospheric turbulence that is modeled by the gamma‐gamma distribution characterizing moderate and strong turbulence conditions. The FSO channel also suffers path loss and pointing error induced misalignment fading. The performance of the considered system is analyzed under the collective influence of distribution shaping parameters, pointing errors that result in misalignment fading, atmospheric turbulence, and path loss. The moment‐generating function of the Signal power to noise power ratio measured end‐to‐end for this system is derived. The cumulative distribution function for the Signal power to noise power ratio present between the source and destination receiver is also evaluated. Further, we investigate the error and outage performance and the average channel capacity for this system. The analytical expressions in closed form for the outage probability, symbol and bit error rate considering different modulation schemes and channel capacity are also derived. The mathematical expressions obtained are also demonstrated by numerical plots.     

Analysis of LDPC with optimum combining

Low density parity check (LDPC) codes have shown exceptionally good performance for single antenna systems over a wide class of channels. LDPC when implemented with a single input multiple output system with maximum ratio combining is optimum from the standpoint of maximising signal-to-noise ratio at combiner output without the presence of interferer. Optimum combining outperforms maximal ratio combining (MRC) in the presence of interferer(s). In this article, the performance of the LDPC codes with multiple receiver antennas with optimum combining in the presence of single interferer is investigated. The simulation results showed that LDPC codes of irregular construction are able to give high coding and diversity gain with optimum combining. The proposed LDPC optimum combined (LDPC–OC) system in Rayleigh fading channel in the presence of a single interferer improves the signal to interferer plus noise ratio by 2.62 dB with four receiver antennas and by 1.98 dB when the number of receiver antennas is three.     

Numerical simulation and modelling of a novel MEMS capacitive accelerometer based microphone for fully implantable hearing aid

Microsystem Technologies - The present work proposes a novel MEMS capacitive accelerometer based microphone with enhanced sensitivity. The accelerometer design is simulated in COMSOL MULTIPHYSICS...