Effect of Sintering Temperature on Magnetic and Electrical Properties of GdBaCo<Subscript>2</Subscript><Emphasis Type="Italic">O</Emphasis><Subscript>5 + <Emphasis Type="Italic">δ</Emphasis></Subscript>

In this study, we report the results of an investigation into the sintering temperature dependence of magnetic and transport properties for GdBaCo₂ O _{5 + δ} synthesized through a sol-gel method. The lowering of sintering temperature leads to the increase of oxygen content and the reduction of grain size. The increase of oxygen content results in the enhancement of magnetic interactions and the weakening of Coulomb repulsion effect, while the reduction of grain size improves the magnetoresistance effect. Metal-insulator transition accompanied with spin-state transition is observed in all samples.     

Epitaxial growth and thermal-conductivity limit of single-crystalline Bi2Se3/In2Se3 superlattices on mica

Nano Research - Thermal transport in superlattices is governed by various phonon-scattering processes. For extracting the phonon-scattering contribution of hetero-interfaces in chalcogenide...     

钢卷尺全自动检测装置视觉技术与系统

钢卷尺全自动检测装置由5m长的高稳定性大理石平台、加载装置、自动卷送带装置、精确的自动对焦机器视觉系统以及计算机控制系统等组成。本文将对自动对焦机器视觉系统进行详细介绍。     

基于Opencv的絮体颗粒跟踪与沉速测量系统研究

针对饮用水处理过程混凝剂投加量对处理结果的直接影响,提出了一个以絮体的沉降速度(作为主控,等效粒径、数量等参数作为辅控的多源数据融合的混凝剂投药模型。本文基于Open CV机器视觉库,以VS2010为平台,采用C++语言,编写絮体检测和沉降速度测量在线系统的软件,实现了絮体各个参数和沉降速度的实时监测。     

Electrochemical corrosion behavior of 2A02 Al alloy under an accelerated simulation marine atmospheric environment

The corrosion behavior of 2A02 Al alloy under simulated marine atmospheric environment has been studied using mass-gain, scanning electron microscope/energy dispersive spectroscopy (SEM/EDS), laser scanning confocal microscopy, X-ray diffraction spectroscopy and localized electrochemical methods. The results demonstrate that the relationship between the corrosion induced mass-gain and the corrosion time is in accordance with the power rule. The mass-gain increases gradually during the corrosion time, while the corrosion rate decreases. With ongoing of the corrosion, corrosion products film changed from a porous to a compact structure. The various spectroscopic data show that the corrosion products films composed mainly of Al(OH)₃, Al₂O₃ and AlCl₃. The electrochemical corrosion behavior of the 2A02 Al alloy was studied by electrochemical impedance spectroscopy (EIS).     

Surface energy-mediated fibronectin adsorption and osteoblast responses on nanostructured diamond

Nanostructured diamond have potential applications in many biomedical related fields and demonstrated extraordinary capacity to influence cellular responses. Studying the surface property of nanodiamond and its influence to protein adsorption and subsequent cellular responses along with the mechanism behind such capacity becomes more important. Here the role of surface energy associated with nanostructured diamond in modulating fibronectin and osteoblast(OB, bone forming cells) responses was investigated. Nanocrystalline diamond(NCD) and submicron crystalline diamond(SMCD) films with controllable surface energy were prepared by microwave-enhanced plasma chemical vapor deposition(MPCVD) techniques. Fibronectin adsorption on the diamond films with varied surface energy values was measured via the enzyme-linked immunosorbent assay(ELISA) and the relationship between the surface energy and fibronectin adsorption was studied. The result indicated that fibronectin adsorption on nanostructured surfaces was closely related to both surface energy and material microstructures. The spreading and migration of OB aggregates(each containing 30–50 cells) on the NCD with varied surface energy values were also studied. The result indicates a correlation between the cell spreading and migration on nanodiamond and the surface energy of nanostructured surface.     

Numerical and experimental investigations of laser shock forming aluminum alloy sheet with mold

Laser shock forming (LSF) technology employs shock waves to form sheet metal into three-dimensional complex parts, and has application potential in manufacturing sheet metal parts. In this paper, the forming of 2024 aluminum alloy sheet with LSF was investigated through numerical and experimental methods. The numerical model was established with the commercial code ABAQUS/Explicit. The formed conical cup was obtained from the simulation, and validated by the experiment. With the verified numerical model, the deformation behaviors, including deformation velocity, sheet thickness variation and strain distribution, were studied. In addition, the influence of different shock wave pressures on the forming precision was also investigated. The experimental and numerical results show that the metal sheet loaded by shock wave can take the shape of the mold, and the non-uniform thickness is distributed in the formed cup. The investigations also display that there exists reverse deformation at the central region of deforming sheet owing to severe collision during LSF. In order to obtain formed part with better quality, an appropriate pressure of applied shock waves is required.     

Graphene oxide-decorated Fe<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> microflowers as a promising anode for lithium and sodium storage

Mixed transition metal oxides (MTMOs) have received intensive attention as promising anode materials for lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs). In this work, we demonstrate a facile one-step water-bath method for the preparation of graphene oxide (GO) decorated Fe₂(MoO₄)₃ (FMO) microflower composite (FMO/GO), in which the FMO is constructed by numerous nanosheets. The resulting FMO/GO exhibits excellent electrochemical performances in both LIBs and SIBs. As the anode material for LIBs, the FMO/GO delivers a high capacity of 1,220 mAh·g^–1 at 200 mA·g^–1 after 50 cycles and a capacity of 685 mAh·g^–1 at a high current density of 10 A·g^–1. As the anode material for SIBs, the FMO/GO shows an initial discharge capacity of 571 mAh·g^–1 at 100 mA·g^–1, maintaining a discharge capacity of 307 mAh·g^–1 after 100 cycles. The promising performance is attributed to the good electrical transport from the intimate contact between FMO and graphene oxide. This work indicates that the FMO/GO composite is a promising anode for high-performance lithium and sodium storage.

Open image in new window