Experimental and numerical study on natural ventilation performance of various multi-opening wind catchers

Wind catcher as a natural ventilation system is increasingly used in modern buildings to minimize the consumption of non-renewable energy and reduce the harmful emissions. Height, cross section of the air passages and also place and the number of openings are the main factors which affect the ventilation performance of a wind catcher structure. In this study, experimental wind tunnel, smoke visualization testing and computational fluid dynamic (CFD) modeling were conducted to investigate ventilation performance of wind catchers with different number of openings to find how the number of opening affects hydrodynamic behavior of wind catchers. To achieve this particular aim, five cylindrical models with same cross section areas and same heights were employed. The cross sections of all these wind catchers were divided internally into various segments to get two-sided, three-sided, four-sided, six-sided and twelve-sided wind catchers. The experimental investigations were conducted in an open circuit subsonic wind tunnel. For all these five shapes, the ventilated air flow rate into the test room was measured at different air incident angles. Numerical solutions were used for all these five configurations to validate the proposed measuring techniques and the corresponding wind tunnel results. The results show that the number of openings is a main factor in performance of wind catcher systems. It also shows that the sensitivity of the performance of different wind catchers related to the wind angle decreases by increasing the number of openings. Moreover, comparing with a circular wind catcher a rectangular system provides a higher efficiency.     

Optimisation of osmotic dehydration process of guavas by response surface methodology and desirability function

Response surface methodology was used to assess the effects of osmotic solution concentration (40–60°Brix), process temperature (20–40 °C) and vacuum pulse application time (0–20 min) at 100 mbar on water loss (WL), weight reduction (WR), solid gain (SG), water activity (a_w), colour parameters and mechanical properties of guava slices. Optimal process conditions were determined through the desirability function approach and quality characteristics of osmotically dehydrated guavas were analysed. Only models obtained for WL, WR and a_w were suitable to describe the experimental data. The desirability function showed that optimal conditions for osmotic dehydration of guavas were: osmotic solution concentration at 60°Brix, process temperature at 32 °C and 20 min of vacuum pulse application. Under optimal conditions, colour and mechanical properties of treated guavas were similar to fresh fruit, presenting WL of 29.01 g/100 g, WR of 25.91 g/100 g, SG of 3.10 g/100 g and a_w of 0.979.     

Effects of cross-linking and acetylation on oat starch properties

Starch samples separated from oat were modified with two different levels of POCl₃ (0.5 and 1.0 g kg⁻¹) as a cross-linking agent and two different levels of acetic anhydride (6% and 8% (w/w)) for acetylation. Swelling factor, thermal properties and retrogradation measurements were evaluated to characterise the influence of phosphorylation and acetylation on oat starch. Cross-linking decreased the swelling factor and did not improve gelatinization temperature while it increased synaeresis in comparison with native starch. Acetylation increased swelling factor but reduced gelatinization temperature and synaeresis of oat starch.     

Escherichia coli of poultry food origin as reservoir of sulphonamide resistance genes and integrons

The antimicrobial resistance phenotype and genotype, the flanking regions of sulphonamide resistance genes and the integrons were analyzed in 166 Escherichia coli isolates recovered from poultry meat in Tunisia. High percentages of resistance were detected to ampicillin, streptomycin, nalidixic acid, sulphonamide and tetracycline (66-95%), and lower percentages to gentamicin, amoxicillin-clavulanic acid and cefoxitin (1-4%). The bla_TEM, tet(A)/tet(B), aph(3′)-Ia, aac(6′)-Ib-cr, aac(3)-II and cmlA genes were identified in 92, 82, 29, 2, 2 and 7 isolates, respectively. Class 1 and/or class 2 integrons were detected in 52% of E. coli isolates and five different gene cassette arrangements were identified in the variable regions of class 1 integrons, which included antimicrobial resistance determinants. Sixty-eight isolates contained the sul1 gene and 37 of them presented this gene into a class 1 integron structure. The sul3 gene was detected associated with non-classic class 1 integrons in 4 out of 46 sul3-positive isolates. The sul2 gene was detected in 66 isolates, 51 of them were linked to strA/B genes in seven different genetic structures. Seventy-three-per-cent of integron-positive isolates presented resistance to at least five different antimicrobial families versus 38.7% of integron-negative isolates. Our study highlights the role of commensal E. coli isolates from poultry meat as an important reservoir for sulphonamide resistance genes and integrons carrying antimicrobial resistance genes.     

Preparation and characterization of β-cyclodextrin grafted silk fabric

ABSTRACT

Silk fabrics were treated by β-cyclodextrin (β-CD) in the presence of citric acid (CA) as crosslinking agent and sodium hypophosphite (SHP) as catalyst using pad dry cure technique. CA is expected to react with β-CD and hydroxyl groups of silk fibroin via esterification reaction. Four independent factors including curing time, curing temperature, β-cyclodextrin, and citric acid concentrations were selected, and effects of these factors on the weight gain of the samples were examined. Fourier transformed infrared spectrometer (FTIR), weight gain, differential scanning calorimetry (DSC), Thermal gravimetric (TGA) and differential thermal analysis (DTA), and field-emission scanning electron microscope (FE-SEM) were employed to confirm the changes of the silk fabrics. The effect of crosslinking reaction on the color changing of samples was investigated by measurement yellowness index of the treated fabrics. The results revealed that the weight gain could reach up to 22% when fabric was treated with 50 g/L β-CD, 100 g/L CA under 170°С for 3 min. FTIR and thermal analysis demonstrated that β-CD had been grafted onto silk fabric successfully.     

Modification of Silk Fibers via β-cyclodextrin – Empirical Modeling and Process Optimization Using Response Surface Methodology

ABSTRACT

Modification of silk fabric via grafting with β-cyclodextrin (β-CD) using citric acid (CA) as a cross-linking agent was studied and optimized. A four-factor central composite design combined with response surface methodology (RSM) was employed to optimize the reaction conditions (CA and β-CD concentration, curing temperature, and time) for preparation of β-CD modified silk fabric with a maximum degree of grafting yield and minimum strength loss and minimum yellowness Index. Analysis of variance (ANOVA) proposed a significant quadratic model for optimizing of grafting factors. From the obtained results, it is concluded that CA concentration and curing temperature had a greater influence on grafting yield than curing time and CD concentration. The optimum grafting condition was obtained at β-CD concentration: (57 g/L), CA concentration: (57 g/L), curing temperature: (167°C), and curing time (4 min) which results grafting of CD equal to 10%.     

Functional components,antidiabetic, anti-Alzheimer’s disease,and antioxidant activities of Salvia syriaca L.

Antidiabetic, anti-Alzheimer, general toxicity, and antioxidant activities of Salvia syriaca were evaluated. Phytochemical composition of the essential oil and methanolic extract of the plant were identified using gas chromatography-mass spectrometry and reverse-phase high-performance liquid chromatography-diode array detector techniques, respectively. Essential oil of S. syriaca exhibited strong cytotoxicity, antioxidant, α-amylase, and α-glucosidase inhibitory activities. Gas chromatography-mass spectrometry analysis showed that spathulenol (87.4%), isospathulenol (7.6%), and bornyl acetate (2.7%) are the major compounds in essential oil. High-performance liquid chromatography analysis indicated that rutin, quercetin, apigenin, rosmarinic acid, and ferulic acid are the most abundant phenolic components. S. syriaca could be considered as a valuable source of bioactive natural compounds for functional foods, medical, and pharmaceutical applications.     

Salmonella contamination of laying-hen flocks in two regions of Algeria

A preliminary epidemiological study of Salmonella contamination in laying-hen flocks was carried out in the regions of Annaba and Eltarf, Algeria, from March to October 2008 and March to November 2009. Our objectives were (i) to estimate the prevalence of infection by Salmonella spp. in seven pooled samples during the hens' laying period (ii) to identify the serotypes and antimicrobial resistance phenotypes of isolates, and (iii) to characterize the factors that may be related to Salmonella contamination in Algerian henhouses. For this purpose, 18 out of 22 operational laying-hen houses were sampled one to three times during these periods: once at the start of laying (pullets aged 22–31 weeks), once in the middle of laying (47–60 week) and once at the end of laying prior to depopulation (70–86 week). The flocks'Salmonella status was assessed by collecting 2754 environmental samples that were analyzed according to the ISO 6579 method. The antibiotic resistance of Salmonella strains was tested as per the guidelines of the Clinical and Laboratory Standards Institute (CLSI). The relationship between each potential risk factor and the Salmonella status of laying-hen flocks was evaluated by calculating the relative risk with 95% confidence intervals. Eight flocks tested positive for Salmonella spp., with a higher prevalence at the end of laying than at either the beginning or middle. Only 19 isolates were recovered from the 2754 samples analyzed and nine different serotypes identified. S. enteritidis (n = 4) was the most prevalent serovar, along with S. Kentucky and S. Hadar (n = 3), followed by S. Heidelberg, S. Manhattan and S. Virchow (n = 2), whereas S. Dublin, S. Typhimurium and S. Albany were found only once. Thirteen isolates were resistant to at least one antimicrobial agent. Of these, six were resistant to at least three different antimicrobial classes. Salmonella serovar Kentucky isolates were resistant to fluoroquinolones with ciprofloxacin MIC ≥ 8 mg/L. Six risk indicators were identified as potentially related to the Salmonella status of layer houses.     

Physicochemical,Rheological, and Thermal Properties of Six Types of Honey from Various Floral Origins in Tunisia

The present study was undertaken to determine the physicochemical, rheological, and thermal properties of six types of Tunisian honey samples from various floral origins (eucalyptus, orange, thyme, mint, rosemary, and horehound). All the honey samples exhibited non-Newtonian behavior at a shear rate ranging between 0.01 and 500 s^–1, with the highest levels of viscosity (µ) being observed for thyme, followed by eucalyptus, rosemary, mint, orange, and horehound honeys, respectively. The effect of temperature on the dynamic viscosity of the samples followed an Arrhenius-like pattern, with activation energy values ranging from 21.23 to 34.91 kJ/mol. The results from oscillatory rheology analysis also revealed that the loss modulus predominated over the storage one in the whole frequency range. As determined by differential scanning calorimetry, the glass transition (T_g) and melting temperatures of the Tunisian honey samples varied between –41.55 and –47.06 °C and between 197.9 and 221.1°C depending on their sugar compositions, respectively.     

Nutritional composition of Zizyphus lotus L. seeds

BACKGROUND: Zizyphus lotus seeds are an unutilized source of vegetable oil and protein and nothing has been reported on their physicochemical characteristics which would indicate the potential uses of these seeds. RESULTS: The percentage composition of the Zizyphus lotus seeds is (on a dry‐weight basis): ash 1.05%, oil 32.92%, protein 19.11%, total carbohydrate 40.87% and moisture 6.05%. Calcium, potassium and magnesium constitute the major minerals of Zizyphus lotus seeds. The seed proteins are rich in threonine, glutamic acid, leucine, arginine and aspartic acid (26.73%, 17.28%, 13.11%, 9.47% and 7.76%, respectively). The main fatty acids of the oil are oleic (61.93%), linoleic (18.31%) and palmitic (9.14%) acids. Glycerol trioleate (OOO; O: oleic acid) was the most abundant triacylglycerol, representing 26.48% of the total triacyglycerols. β‐Tocopherol was the major tocopherol (130.47 mg 100 g^?1). This oil was rich in Δ7‐campestrol and β‐sitosterol (147.82 and 82.10 mg 100 g^?1 oil), respectively. CONCLUSION: Zizyphus lotus seeds are rich in fat and protein which are of potential industrial significance. In addition, Zizyphus lotus L. seed oil contained many bioactive compounds. This fact is of great economic interest owing to several applications of Zizyphus lotus L. seeds in the food, cosmetics and medicinal industries. Copyright © 2011 Society of Chemical Industry