Comparative Analysis of Ozone and Ultrasound Effect on the Elimination of Giardia spp. Cysts from Wastewater

Giardia spp. is a flagellate protozoan that presents two evolution forms, cysts and trophozoites. Cysts are resistant to chlorine, the most employed disinfectant agent in the treatment of water. For this reason, new techniques for the disinfection of waters that contain this parasite are necessary. This work evaluated the efficiency of the disinfection by ozone and ultrasound individually and simultaneously upon wastewater. The data obtained showed that after application, ozone, ultrasound, and combined techniques induced a significant elimination of Giardia spp. cysts. Furthermore, this effect was more accentuated when the two techniques were applied simultaneously.     

Towards an international tradable green certificate system—The challenging example of Belgium

In Europe, a common framework for renewable energy sources (RES) is aspired. Tradable green certificates (TGCs) are a market-based cost-efficient means to stimulate electricity production from RES. Since TGCs are the most widespread support scheme in Europe together with feed-in tariffs, chances are that a common European framework could well be based on TGCs. However, while integrating currently existing different national TGC systems, any remaining differences should be carefully considered. Just how difficult the creation of an international TGC market would be is illustrated in this paper by the case of Belgium, where no less than 4 different TGC systems exist nowadays. The example of Belgium illustrates that harmonizing different TGC systems is easier said than done and represents a serious challenge. This clearly illustrates that a single European support scheme for RES, however desirable, is still far in the future.     

Influence of liquid lead and lead-bismuth eutectic on tensile, fatigue and creep properties of ferritic/martensitic and austenitic steels for transmutation systems

In this paper, the tensile, fatigue and creep properties of the Ferritic/Martensitic (F/M) steel T91 and of the Austenitic Stainless (AS) Steel 316L in lead-bismuth eutectic (LBE) or lead, obtained in the different organizations participating to the EUROTRANS-DEMETRA project are reviewed. The results show a remarkable consistency, referring to the variety of metallurgical and surface state conditions studied. Liquid Metal Embrittlement (LME) effects are shown, remarkable on heat-treated hardened T91 and also on corroded T91 after long-term exposure to low oxygen containing Liquid Metal (LM), but hardly visible on passive or oxidized smooth T91 specimens. For T91, the ductility trough was estimated, starting just above the melting point of the embrittler (T_M,E = 123.5 °C for LBE, 327 °C for lead) with the ductility recovery found at 425 °C. LME effects are weaker on 316L AS steel. Liquid Metal Assisted Creep (LMAC) effects are reported for the T91/LBE system at 550 °C, and for the T91/lead system at 525 °C. Today, if the study of the LME effects on T91 and 316L in LBE or lead can be considered well documented, in contrast, complementary investigations are necessary in order to quantify the LMAC effects in these systems, and determine rigorously the threshold creep conditions.     

Anticoagulant, Antioxidant and Antitumor Activities of Heterofucans from the Seaweed Dictyopteris delicatula

In the present study, six families of sulfated polysaccharides were obtained from seaweed Dictyopteris delicatula by proteolytic digestion, followed by acetone fractionation and molecular sieving on Sephadex G-100. Chemical analyses demonstrated that all polysaccharides contain heterofucans composed mainly of fucose, xylose, glucose, galactose, uronic acid, and sulfate. The fucans F0.5v and F0.7v at 1.0 mg/mL showed high ferric chelating activity (～45%), whereas fucans F1.3v (0.5 mg/mL) showed considerable reducing power, about 53.2% of the activity of vitamin C. The fucan F1.5v presented the most prominent anticoagulant activity. The best antiproliferative activity was found with fucans F1.3v and F0.7v. However, F1.3v activity was much higher than F0.7v inhibiting almost 100% of HeLa cell proliferation. These fucans have been selected for further studies on structural characterization as well as in vivo experiments, which are already in progress.     

A new approach to spatial compression of stereoscopic videos

This paper presents a new spatial compression method specifically designed for stereo videos. Different form current compressors, which simply apply known 2D compression techniques, the method proposed here was developed taking into account specificities of the components of the spatial compression process which may impact the correct depth visualization, named Chrominance Subsampling, Discrete WaveletTransform (DWT) and Quantization. Each component was evaluated analyzing where datalosses occur and proposing ways to provide a good balance between compression ratio and image quality, minimizing losses in depth perception. The evaluations were made using standard objective (PSNR) and subjective (DSCQS) metrics, applied to an anaglyphic stereoscopic video base. The results showedour method is competitive regarding compression rate and providessuperior image quality.     

Validation of a UV Spectrophotometric Method for Determination of Proteolytic Activity of Enzymatic Detergents

Enzymatic detergents are widely used in health services. These products should be controlled to ensure their activity. In this paper, a UV spectrophotometric method for the determination of proteolytic activity in enzymatic detergents was validated. An artificial substrate (azocasein) was used to quantify the enzyme activity at 340 nm. The results showed that the method was satisfactory in respect to its specificity, linearity, precision, accuracy and robustness. This method fulfills both ICH’s and Brazilian criteria, demonstrating its suitability for routine analysis as well as its potential application for regulatory purposes.     

Channel Bed Slope Effect on the Height of Gravity Waves Produced by a Sudden Downstream Discharge Stoppage

We derive a simple analytical correction of a well-known standard formulation of the gravity wave height produced in a prismatic channel due to a sudden discharge stoppage at the downstream end of the channel. The proposed analytical correction considers the vertical growth of the wave and, as a result, takes into account the effect of the channel bed slope on the wave height. This simple correction is useful to be considered in preliminary designs of relatively long channels subject to unsteady flow conditions.     

Variability of Phytosterols in Jatropha curcas Germplasm

Jatropha curcas L. has great potential for biofuel and phytosterol production. The objective of this research was to evaluate G × E variability for kernel phytosterol content and composition in Jatropha germplasm. Freshly matured seeds from 21 accessions grown in Málaga, Spain were collected at two stages of development. Significant genetic variation was detected for total kernel phytosterol content, which ranged from 2,246 to 2,883 mg kg^?1; and stigmasterol concentration, which ranged from 7.6 to 11.5 % of the total phytosterols. An accession with 9.2 % Δ⁵‐avenasterol was also identified. The coefficient of variation for kernel phytosterol content and stigmasterol concentration was 6.2 and 14.0 % respectively between accessions and 7.2 and 10.2 % respectively within accessions. Accordingly, evaluation of plant to plant variation is advisable. The existence of variability for kernel phytosterol content and composition in Jatropha will enable breeding for enhanced levels of these compounds.     

Physical and Tribological Properties Degradation of Silicone Rubber Using Jatropha Biolubricant

This article aims to investigate the degradation of physical and tribological properties (friction coefficients and wear resistance) of a dynamic sealing material (silicone rubber [VMQ]) exposed to Jatropha oil (JO), engine mineral oil (EMO), and a blend (B20; 80% EMO–20% JO), separately. JO has demonstrated better lubricating properties than EMO in various mechanical applications; however, the degradation of elastomers by using this oil has not been studied yet, nor have its effect on their tribological properties. The physical degradation was evaluated by conducting static immersion tests (670 h at 25 °C) based on ASTM-D471 and ASTM-D7216 methods. Hence, the changes in mass, volume, tensile and tear strengths, and hardness of VMQ were measured. In addition, creep compliance tests were conducted to determine the changes in viscoelastic properties and the changes in morphology and topography were measured by scanning electron microscopy (SEM) and optical profilometry, respectively. In addition, the compositional changes were determined by Fourier transform infrared (FTIR) analyses to complement the degradation examination. Changes in the friction coefficients were determined by ball-on-disk tests and changes in wear resistance were obtained by accelerated wear tests (microabrasion tests). Finally, VMQ exhibited no significant physical and compositional degradation due to immersion in the three lubricants. However, considerable changes in the friction coefficients and wear resistance were observed; the change in the friction coefficients was minimal using JO. In addition, the coefficients using JO were 50% lower than those for EMO and the changes in wear resistance were lowest after immersion in JO.