Platelet‐to‐lymphocyte ratio better predicts inflammation than neutrophil‐to‐lymphocyte ratio in end‐stage renal disease patients

Neutrophil‐to‐lymphocyte ratio (NLR) was introduced as a potential marker to determine inflammation in end‐stage renal disease (ESRD) patients. Recently, platelet‐to‐lymphocyte ratio (PLR) and NLR were found to positively correlated with inflammatory markers including tumor necrosis factor‐α (TNF‐α) and interleukin (IL)‐6 in cardiac and noncardiac patients. Data regarding PLR and its association with inflammation are lacking in hemodialysis (HD) and peritoneal dialysis (PD) patients. Hence, we aimed to determine the relationship between PLR, NLR, and inflammation in ESRD patients. This was a cross‐sectional study involving 62 ESRD patients (29 females, 33 males; mean age, 49.6 ± 14.6 years) receiving PD or HD for ≥6 months in the Dialysis Unit of Necmettin Erbakan University. PLR, NLR, C‐reactive protein, TNF‐α, IL‐6 levels were measured. PLR, NLR, serum high sensitive C‐reactive protein, IL‐6, and TNF‐α levels were significantly higher in PD patients when compared with HD patients. ESRD patients with PLR ≥ 140 had significantly higher NLR, IL‐6, and TNF‐α levels when compared to patients with PLR < 139. In the bivariate correlation analysis, PLR was positively correlated with NLR, IL‐6, and TNF‐α in this population. When we compared the association of PLR and NLR with IL‐6 (r = 0.371, P = 0.003 vs. r = 0.263, P = 0.04, respectively) and TNF‐α (r = 0.334, P = 0.008 vs. r = 0.273, P = 0.032, respectively), PLR was found to be superior to NLR in terms of inflammation in ESRD patients. Simple calculation of PLR can predict inflammation better than NLR in ESRD patients.     

Extraction of Bioactive Compounds from Milled Grape Canes (Vitis vinifera) Using a Pressurized Low-Polarity Water Extractor

Trans-resveratrol and trans-ε-viniferin were extracted from milled grape canes using pressurized low-polarity water. The effects of temperature were significant for both compounds (p ≤ 0.05): extraction at 160 °C resulted in a 40% loss of trans-resveratrol compared to 95 °C while reduction of trans-ε-viniferin at both temperatures remained at 30%. Increasing ethanol concentration from 0% to 25% increased the extraction of total phenolics and trans-ε-viniferin by 44% and 489%, respectively. Solvent flow rate also influenced trans-ε-viniferin extraction. Antioxidant activity showed a strong correlation with total phenolic content of the extracts, and the two target phenolic compounds. Except for the modifier concentration, the extraction parameters studied were not statistically significant with respect to the antioxidant activity of extracts (p > 0.05). Effective diffusivities of trans-resveratrol multiplied from 3.3 × 10⁻¹¹ to 10.4 × 10⁻¹¹ m²/s by three times with increasing temperature. The modified Gompertz equation satisfactorily explained the extraction of the stilbenes investigated.     

Microstructure,Mechanical, and Scratch Resistance Properties of TiAlCrNbN-Graded Composite Coating Deposited on AISI H13 Steel Substrate with Pulsed DC Closed Field Unbalanced Magnetron Sputtering Method

Structure and adhesion properties of TiAlCrNbN coatings were investigated. These coatings were deposited onto AISI H13 steel substrate using pulsed dc closed field unbalanced magnetron sputtering at different deposition parameters including duty cycle, bias voltage, and working pressure. The coatings have been characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy. The TiAlCrNbN-graded composite coatings have a dense and columnar structure. The X-ray diffraction patterns of coatings exhibited predominantly c-TiAlCrN, h-NbN, and h-TiAlN reflections. Scratch resistance test showed that the highest adhesion strength was attained as 68 N at 2.5 μs duty time, 100 V bias voltages, and 3 × 10^?3 Torr deposition parameters. The lowest adhesion strength was obtained as 55 N at 0.5 μs duty time, 50V bias voltage, and 2 × 10^?3 Torr deposition parameters.     

Comparison of Fatty Acid, Sterol, and Tocol Compositions in Skin and Kernel of Turpentine (Pistacia terebinthus L.) Fruits

Pistacia terebinthus L. is an indigenous plant growing wild in the southern regions of Turkey. Its fruits are used in foods, pharmaceuticals and cosmetics due to its high oil content (ca. 45 g/100 g). In the present study, it was found out that the kernel and the skin parts of the fruit differ significantly (p < 0.05) both in terms of oil content and composition. Regardless of the geographical origin, the most abundant fatty acid was found to be monounsaturated oleic acid, 18:1n-9 whose content was in the range of 51.2–67.5 g/100 g. β-sitosterol is the predominant sterol in kernel and skin of the terebinthus fruits whose content was varying between 97.4 and 219.8 mg/100 g. Concerning different tocols (tocopherols and tocotrienols) detected in the kernel and skin, γ-T was the one with highest concentration (437.2 mg/kg) in kernels, while the most abundant one in skin parts was found to be α-T (348.7 mg/kg). In general the kernel of terebinthus fruits was more concentrated in PUFA, total sterol and tocopherols than skin, however, total tocotrienol content was higher in skin than kernel. On the basis of these findings it can be concluded that both kernel and skin are highly valuable in terms of bioactive compounds, whereas skin with a high amount saturated fatty acids is more suited to applications in cosmetic industry.     

Inhibitory effect of heavy metals on methane-producing anaerobic granular sludge

Heavy metals could potentially have a negative impact on methane-producing anaerobic granular sludge. The objective of this study was to investigate the inhibitory effect of zinc(II), chromium(VI), nickel(II), and cadmium(II) on the methane-producing activity of granular sludge sampled from the upflow anaerobic sludge blanket reactor that treats the wastewaters of a yeast factory, for a range of concentrations between 0 and 128 mg L(-1). The modified Gompertz, Logistic, and Richards equations were applied to describe the inactivation of anaerobic culture by heavy metals. According to these models, the values of methane production potential (mL) for a heavy metal concentration of 128 mg L(-1) were in the following order: Ni (44.82+/-0.67)>Cd (28.73+/-0.11)>Cr (15.52+/-1.63)>Zn (0.65+/-0.00). The IC(50) values, the metal concentrations that cause a 50% reduction in the cumulative methane production over a fixed period of exposure time (24h), for the individual heavy metals were found to be in the following order: Zn (most toxic; 7.5 mg L(-1))>Cr (27 mg L(-1))>Ni (35 mg L(-1)) approximately Cd (least toxic; 36 mg L(-1)).     

Effect of packing on void morphology in resin transfer molded E‐glass/epoxy composites

Effects of applying a packing pressure on void content, void morphology, and void spatial distribution were investigated for resin transfer molding (RTM) E‐glass/epoxy composites. Packing pressures of zero and 570 kPa were respectively applied to center‐gated composites containing 17.5% randomly oriented, E‐glass fiber preform. Radial samples of these disk‐shaped composites were utilized to evaluate voidage via microscopic image analysis. Two adjacent surfaces were cut from each molded disk in order to evaluate void presence from both through‐the‐thickness and planar views. The packed composite was found to contain almost 92% less void content than the unpacked composite. While void fractions of 2.2 and 2.6% were measured, respectively, from the through‐the‐thickness and planar surfaces of the unpacked composite, only 0.2% void content was observed in the packed composite from both surfaces. Digital images obtained from through‐the‐thickness surface showed that average void size dropped from 59.3 μm in the unpacked composite to 31.7 μm in the packed composite. A similar reduction in average void size from 66.7 to 41.1 μm was observed from the planar surfaces. Circular voids were found to experience higher removal rates at 99%, followed by cylindrical and elliptical voids at 83 and 81%, respectively; while irregular voids show slightly lower void removal rates at 67%. Void proximity to fiber bundles was also observed to affect void reduction as voids located inside fiber tows experience lower void reduction rates. Along the radial direction of the molded disks, removal of voids with different proximities to fibers seems to depend on their arrangement at the end of the filling stage. These findings are believed to ascertain packing as an effective void removal method for RTM and similar liquid composite molding processes. POLYM. COMPOS., 26:614–627, 2005. © 2005 Society of Plastics Engineers     

In vitro cytotoxicity of monticellite based bioactive ceramic powder synthesized from boron derivative waste

The cytotoxicity of monticellite based bioactive ceramic powder, which was synthesized from boron derivative waste has been determined by in vitro assays of MTT, NRU, and JC-1 staining. The toxicity of powder on different mammalian cell lines (3T3-L1, HUVEC, CRL-2120) was evaluated at the concentrations of 10, 100, 200, 400 and 800?µg/mL to justify its potential for biomedical applications. The obtained results showed that monticellite based bioactive ceramic powder possesses not only bioactive feature but also biocompatible characteristic at the concentration range of 10–200?µg/mL. Hence, monticellite based bioactive ceramics have high potential as a bone graft substitute for bone void filling and coating applications.     

3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview

Recently, polyvinylidene fluoride (PVDF) based nanocomposites have attracted much attention for next-generation wearable applications such as promising piezoelectric energy harvesters (nanogenerators), energy storage devices, sensing devices, and biomedical devices due to their high flexibility, and high dielectric and piezoelectric properties. 3D printing technology, PVDF based piezoelectric nanocomposites, the studies based on 3D printing of PVDF based piezoelectric nanocomposites by inkjet printing and fused deposition modeling, and enhancements of energy harvesting and storage performance of nanocomposites by structural design are comprehensively overviewed here. An insight is provided into 3D printing techniques, structure and properties of PVDF based polymers, various nanofillers and production methods for nanocomposites, solutions to enhance β phase (crystallinity) of PVDF, and improvements of nanocomposites’ breakdown strength, discharged energy density, and piezoelectric power output by mentoring structural design.     

Social dominance mediates the association of testosterone and neurobehavioral disinhibition with risk for substance use disorder.

This investigation determined the influence of testosterone and neurobehavioral disinhibition (ND) on risk for substance use disorder (SUD). Testosterone level during puberty was hypothesized to promote social dominance associated with norm-violating behavior that, in turn, predisposes individuals to use of illicit drugs and, subsequently, SUD. Using a prospective paradigm, the authors recruited 179 boys (mean age=11.62 years, SD=0.88) and followed up when participants were ages 12-14, 16, 19, and 22. Results indicated that social dominance/norm-violating behavior (SD/NVB) at age 16 mediated the association between testosterone level (ages 12-14) and SUD (age 22). In addition, SD/NVB mediated the association between ND and SUD. These findings suggest that development of SUD is influenced by androgen-dependent and neurobehavioral processes via a social motivational style characterized by SD/NVB. (PsycINFO Database Record (c) 2010 APA, all rights reserved)