激光平网雕刻机设计

研制了用于制作平面网版的激光雕刻机，设计了雕刻机用CO2激光器、光路系统及单片机控制系统，探讨了将图像文件转化为控制命令文件的方法。     

红外背景干扰研究

根据从许多地区收集来的录象磁带上的图象数据和大量红外图象数据，对红外背景图象内的干扰进行了研究。图象内的噪声是以象元电平为单位的均方根形成计算。图象经过空间滤波处理，对其内的干扰再进行计算。为获得关于红外背景图象的空间频率构成的信息，在滤波和非滤波两种状态下计算了图象的光谱密度，把计算出的干扰值输入数据库取出多组数据并绘图，确定参数量（如天气、背景类型和测量条件等）对干扰电平的影响。     

承钢棒材连轧线计算机控制系统

主要介绍了承钢棒材连轧线计算机控制系统，其中包括了系统的硬件配置，控制功能及控制说明。     

FATIGUE CRACK GROWTH UNDER MODE II LOADING

Abstract— The behavior of fatigue crack growth for low and medium carbon steels, an austenitic stainless steel and an aluminum alloy under pure Mode II loading was investigated experimentally, using cruciform specimens. The results show that under pure Mode II loading, fatigue crack propagation has three possibilities, namely, bifurcation into two branches, propagation along the original Mode II direction, and the mixture of these two situations, depending on the material. The growth rate da/dN vs. ΔK_II relation for Mode II propagation is similar to a Pans type law for Mode I growth. Fractographic observations by optical microscopy and SEM were made also on all specimens tested. When a crack branched, striations parallel to the crack front which were often associated with Mode I fatigue crack growth were observed and long marks parallel to the crack propagation direction were also found for slanted fracture surfaces. When a crack propagated along the original Mode II direction, many frictional marks parallel to the crack propagation direction were observed.     

An ARQ scheme using combined QPSK and BPSK transmissions

We propose a hybrid ARQ scheme which uses QPSK modulation for the first transmission and BPSK modulation for retransmissions. The throughput performance of the proposed ARQ scheme is better that those of ARQ schemes purely using QPSK modulation or purely using BPSK modulation for transmissions. Furthermore, the proposed scheme does not require any operation of error correction as usually required in hybrid ARQ schemes. Therefore, the ARQ scheme proposed in this paper can be easily implemented     

关于重力坝坝内细部构造设计的几个问题

重力坝常采用横，纵缝将坝体分为柱状体施工。为此，横缝须设置止水，纵缝则待坝体冷却后灌浆，将柱状坝块连成整体。此外坝体内部还须设置坝面排水管以消除坝内渗透压力。关于坝内这些细部构造，设计规范仅有原则性要求，一般专业书列举不多，目前有些工程往往参照已建工程的设计图采用，常由于施工详图不祥易发生施工质量问题。根据丹江口重力坝设计经验，对接缝灌浆中的键槽，止浆片，灌浆管道，出浆盒，排气槽及排气管，基岩陡坡     

逆向反射镜光度测量

为了正确评价逆向反射镜的加工质量与使用效果，且将二者有机地统一起来，本文提出应根据测试目的来选择合适的光度测量方法，并进一步分析了不同测试目的将导致测量装置的组成、几何条件（距离，孔径角，工作姿态等）、光度条件（光源色温、稳定性与均匀性，接收器线性、灵敏度与光谱修正等）、测量参数（反光强度系数、逆反射系数、逆亮度系数等）等各不相同。     

八种新功能晶体的比热及其与相变掺杂物关系的实验研究

本文对八种新型功能晶体Ｌｉ２Ｂ４Ｏ７、Ｂｉ１２ＴｉＯ２０、Ｂｉ１２ＧｅＯ２０、Ｂｉ１２ＧｅＯ２０、Ｂｉ４Ｇｅ３Ｏ１２、Ｓｒ１－ｘＢａｘＮｂ２Ｏ６（ｘ＝０．３３，０．４８）、ＬｉＴａＯ３等在１３０～９７３Ｋ范围内的比热行为及其与相变、组分之间的关系进行了实验研究，给出了比热的多项式拟合方程，并与用纽曼－卡普定律及用Ｗｉｋｅｌｍａｎｎ经验方程的比热计算值作了对比，为晶体比热的估算提供了依据和方法。     

烧成及热处理工艺对钛酸锶铅基热敏材料性能及显微结构的影响

研究了烧成及热处理工艺对钛酸锶铅基热敏材料的阻温特性及显微结构的影响。通过扫描电镜（ＳＥＭ）和能量分散仪（ＥＤＡＸ）分析了材料的显微结构及不同形貌晶粒的成份。通过对组成、烧成及热处理工艺的控制，可得到具有Ｖ型ＰＴＣＲ特性的热敏材料。     

JETS,PLUMES AND BUOYANT JETS IN STATIC ENVIRONMENT

Turbulence represents an essential aspect in atmospheric and oceanic circulations.In particu-lar,it is a preponderant factor in the dispersion of pollutants of artificial or natural origin.Thevertical turbulent jets,plumes and buoyant jets discharging into static environment is one of themost important and basic flow patterns related with the environment pollution.These flows havenumerous important applications,for example,thrust augmentors,waste disposal plumes fromstacks and combustion systems,and significant problems of turbulent diffusion.