A new algorithm for improving the accuracy of periodic signalanalysis

Digital periodic signal analysis often requires synchronized sampling with the signal being analyzed. In certain practical situations, however, this condition is difficult to satisfy. As a result, a number of undesirable effect such as the spectral leakage associated with the discrete Fourier transform (DFT), and the truncation errors in digital wattmeters arise and degrade system performance. This paper presents a new approach which attempts to remedy the underlying problem. The basic idea of the proposed method is to modify the actual sampled sequence such that it becomes an ideal sample sequence which is synchronized with the signal subjected to sampling. A simple algorithm for modifying the sampled sequence on-line is derived based on interpolation. The proposed approach requires quite modest additional computational burden which makes it suitable for real-time signal professing. To illustrate the practical applicability of the proposed algorithm, the paper considers two distinct but common cases. First, it shows how the proposed method can be used in the case of DFT analysis of harmonic signals, and secondly, it considers the digital wattmeter application area in electrical power-system measurement. Results show that the proposed algorithm is capable of reducing both the leakage effect in DFT analysis and truncation errors in digital wattmeters     

分析恒载效应的有限元方法

本文在Takabatake关于恒载对梁静、动力影响的研究工作的基础上,导出了梁考虑恒载效应的动力分析有限元公式,提出了荷载影响刚度矩阵的概念。分析了分布和集中两种恒载型式对简支梁和悬臂梁自振特性的影响。计算结果表明,用本文方法与Takabatake应用Galerkin方法和近似闭合解方法的结果吻合良好。同时由于本文采用了矩阵形式,不仅便于编制计算机程序,且使方法有更广泛的适用性和灵活性,可更方便地用于各种不同的构造和边界条件下的实际结构。     

PWM开关变换器统一建模法与谐波分析法的应用

介绍了PWM开关功率变换器电路的统一建模方法，并将谐波分析方法应用于电路分析中，理论和实例表明，这种方法容易得到电路变量的基波解和各次谐波解，以及电路的传递函数，具有容易理解和准确度较高的优点。     

潦河灌区农业水费计收现状分析及对策

阐述了潦河灌区农业水费计收现状，对水费计收现状进行分析并提出解决办法。     

Hydrothermal Synthesis of Acicular Lead Titanate Fine Powders

A pure, acicular lead titanate (PbTiO₃) fine powder with a white color has been prepared by hydrothermal synthesis. It is a new phase of PbTiO₃ with I 4 symmetry, cell parameters of a = 12.358 Å and b = 14.541 Å, and a density of 6.80 g.cm⁻³. The influences of pH (12.5 to 14.4), Pb/Ti ratio (1.0 to 1.6) in the feedstock, reaction temperature (130° to 230°C), time (0.25 to 4 h), starting materials, and additives on the formation of acicular PbTiO₃ under hydrothermal conditions have been investigated. The acicular PbTiO₃ with I 4 symmetry, referred to as the PX phase, can be converted to the perovskite-type (PE phase) of PbTiO₃ at about 605°C while its acicular morphology is essentially unchanged. The preferable conditions for preparing pure acicular PX-phase PbTiO₃ are that the pH is 13.0 to 14.0, Pb/Ti ratio is >1.3, reaction temperature is 170° to 200°C, time is 0.5 to 1.0 h, titanium butoxide (Ti[O(CH₂)₃CH₃]₄) is the starting material, and poly(vinyl alcohol) is an additive. The acicular grain of the PX phase is usually less than 100 nm in diameter and more than 1000 nm in length.     

Temperature Dependence of Ultra-Low-Frequency Dielectric Relaxation of Barium Titanate Ceramic

Based on a linear voltage ramp method, ultraslow dielectric relaxation of undoped BaTiO₃ ceramic has been carefully measured over the temperature range between − 180° and +120°C. Temperature dependence of the dielectric constant in the frequency range from 10 ⁻⁵ to 10⁻¹ Hz can be obtained using Kramers–Kronig equations. Close to the Curie temperature, the dielectric constant increases so rapidly that the Curie peak is overwhelmed. Two kinds of relaxation processes were observed in this experiment. Ferroelectric domain and mobile charge are proposed to be responsible for the relaxation over the temperature range. With temperature increasing, Maxwell–Wagner relaxation associated with mobile charge gradually dominates. From relaxation time constants at various temperatures, relaxation activation energies about 0.06 and 0.09 eV are identified.     

不同类型在役抽油机机架受力分析

通过现场测试和检查,对油田特定区域内经过优化后的各种不同类型抽油机在额定载荷下的支架以及连杆受力情况进行了分析和评价。为在油田范围内进行机采设备的选型和推广提供一些参考。     

锗酸铋（Bi4Ge3O12）单晶热物理性质的研究

本文用不同的测试技术和方法测定了锗酸铋(BGO)单晶的比热(300～800K)热膨胀系数(100～1100K)和导温系数(140～700K),进而导出了 BGO 单晶不同温度下的导热系数、定容比热、德拜温度和格虑内森数。本文还对 BGO 单晶热物理性质的变化规律作了理论解释。     

瓦斯燃烧器回流区测试

燃烧器流场内回流区的大小和形状决定了燃烧火焰的稳定性 ,利用APV激光测速系统 ,在燃烧器冷态测试实验装置上对一瓦斯燃烧器冷态模型的流动进行了研究 ,发现了该燃烧器流场内的双回流区结构 ,并得到了中心回流区尺寸与稳焰器结构的关系 ,为该结构类型燃烧器的稳焰设计及稳焰能力的评价提供了实验依据