基于半实物仿真的电路板故障注入系统设计与实现

为了满足某型装备电路板测试性与诊断设计评价的需求,提出了一种基于DSP技术,利用半实物仿真方式实现的故障注入系统;该系统以TMS320C5416系列DSP器件为核心器件,利用CPLD扩展外部电路,主控计算机与该系统的通信通过USB接口实现,在故障注入时通过半实物仿真模式实现对电路板典型故障的注入;通过对典型电路的故障注入试验表明,该系统可靠性高,配置灵活,使用方便;目前该系统已经在工程实践中得到应用,效果明显,对提高电路板测试性设计水平具有重要意义。     

基于改进的基因表达式编程算法在作业车间调度问题中的应用

文章提出一种新颖的方法一改进的基因表达式编程算法来求解作业车间调度问题。作业车间调度问题是许多实际生产调度问题的简化模型,基因表达式编程算法结合了遗传算法和遗传编程的优点,具有更强的解决问题能力,对基因表达式编程算法进行改进使其在作业车间调度问题的应用上更加有效;最后应用一个实例来验证提出方法的有效性。     

Macrophage Membrane-Coated Nanoparticles Sensitize Glioblastoma to Radiation by Suppressing Proneural–Mesenchymal Transformation in Glioma Stem Cells

Radiotherapy is identified as a crucial treatment for patients with glioblastoma, but recurrence is inevitable. The efficacy of radiotherapy is severely hampered partially due to the tumor evolution. Growing evidence suggests that proneural glioma stem cells can acquire mesenchymal features coupled with increased radioresistance. Thus, a better understanding of mechanisms underlying tumor subclonal evolution may develop new strategies. Herein, data highlighting a positive correlation between the accumulation of macrophage in the glioblastoma microenvironment after irradiation and mesenchymal transdifferentiation in glioblastoma are presented. Mechanistically, elevated production of inflammatory cytokines released by macrophages promotes mesenchymal transition in an NF-κB-dependent manner. Hence, rationally designed macrophage membrane-coated porous mesoporous silica nanoparticles (MMNs) in which therapeutic anti-NF-κB peptides are loaded for enhancing radiotherapy of glioblastoma are constructed. The combination of MMNs and fractionated irradiation results in the blockage of tumor evolution and therapy resistance in glioblastoma-bearing mice. Intriguingly, the macrophage invasion across the blood-brain barrier is inhibited competitively by MMNs, suggesting that these nanoparticles can fundamentally halt the evolution of radioresistant clones. Taken together, the biomimetic MMNs represent a promising strategy that prevents mesenchymal transition and improves therapeutic response to irradiation as well as overall survival in patients with glioblastoma.     

Comparison of gas sensing properties based on hollow and porous α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanotubes

Hollow and porous α-Fe₂O₃ nanotubes were successfully synthesized by single nozzle electrospinning method followed by annealing treatment. The crystal structures and morphologies of the as-prepared materials were characterized by X-ray diffraction and scanning electron microscopy, respectively. The as-prepared materials were applied to construct gas sensor devices which gas sensing properties were further investigated. The obtained results revealed that porous α-Fe₂O₃ nanotube gas sensors exhibit a markedly enhanced gas sensing performance compared with hollow α-Fe₂O₃ nanotube gas sensors, which was about three times higher to 100 ppm acetone at 240 °C. Interestingly, hollow and porous α-Fe₂O₃ nanotube gas sensors both showed fast response–recovery time and good selectivity, but the porous ones possessed the shorter recovery time. The improved properties could be attributed to the unique morphology of porous nanotubes. Thus, further improvement of performance in metal-oxide-semiconductors materials could be realized by preparation the unique porous structures of nanotubes. Moreover, it is expected that porous metal-oxide-semiconductors nanotubes could be further design as promising candidates for gas sensing materials.     

任楼煤矿电容电流危害分析与治理研究

针对中性点不接地系统单向接地电容电流易造成配电网络次生灾害和设备损害、易产生单向电弧接地过电压和铁磁谐振过电压的问题,分析评估了任楼煤矿电网电容电流的测试数据,根据评估结果制定了电容电流治理方案,即将中性点不接地系统改为中性点经消弧线圈接地运行方式,并给出了具体实施方案。运行结果表明,该方案大大减少了高幅值电弧接地过电压发生的几率,抑制了铁磁谐振过电压,有利于提高电缆寿命。     

伪码调相雷达高度表中多径信号抑制算法研究

多径误差是伪码调相雷达高度表中重要的误差源之一,为了提高系统的测距精度,建立了采用strobe相关器的伪码跟踪环数学模型,给出了其实现的结构框图;在考虑单路多径信号的基础上分析了多径信号的参数对伪码跟踪环的跟踪误差的影响,并在Matlab环境下对伪码跟踪环的跟踪性能进行了仿真;仿真结果表明在相同的多径参数条件下,strobe相关器可以有效地减小多径引起的跟踪误差,性能优于窄相关器,运算量较多径估计延迟锁定环要小,易于在硬件上实时实现,具有实际应用价值。     

基于确定性测试图形的BIST构建方法

为降低内建自测试(Build-in Self Test,BIST)的测试功耗,提出了一种基于确定性测试图形的内建自测试构建方法:首先采用D算法生成测试所需的测试图形,然后使用粒子群算法对其进行优化,使内建自测试的功耗大幅度降低;文中最后以ISCAS'85Benchmark中的部分电路作为实验对象,并给出了测试图形优化前后的功耗数;实验结果证明该方法能够有效降低内建自测试的测试功耗,并且具有方法简单、无需额外硬件开销的特点.     

Construction and basic performance tests of an underwater monitoring network

With the rapid development of the economy, environmental pollution has become one of the major problems in coastal areas and in cities along rivers. Real-time observations of the water quality along rivers have been considered to be an efficient way to control wastewater emission and manage environmental water quality. Traditional ways to observe the ocean environment, including satellite telemetry, radar, investigation ships, ocean observation stations, etc., are not applicable for water-quality observations along rivers because of their high cost, poor real-time information, low accuracy, and so on. Based on wireless sensor networks (WSN), the study reported here proposes a new observation system using underwater multisensory information. After processing the multisensory data from each sensor, the system transmits it to a hub node through WSN, and then transmits it to a land data center through a general packet radio service (GPRS) wireless network. In order to check the basic performance of this system, we completed a node positioning experiment based on a GPS module, and a communication experiment based on ZigBee. This article reports the design of the hardware and the experimental results.