永定新河河口潮流动力及泥沙特征初步分析

依据永定新河河口１９９７年潮汐观测资料及河道１９９０～１９９７年潮汐观测资料，通过实测资料的整理分析，初步揭示了永定新河河口潮流动力及泥沙特征，为河道的治理规划提供了科学的依据。     

一种基于阵列式触觉传感器的主动触觉搜索方法及仿真

本文在一种二指节手指模型的基础上，提出了一种新的主动触觉搜索策略和方法，综合利用阵列式触觉传感铭的输出图象来不断改变机械手的姿态，从而依次有序地搜索到三维物体的特征点，并据此生成物体的三维图形。此外还讨论了上述方法的计算机仿真实现。     

心电地图仪中工频干扰的一种滤除方法

在心电地图仪中记录到的体表心电信号往往由于电磁的影响而引进工频干扰．基于体表心电信号中工频干扰的特点，作者提出了一种滤除工频干扰的方法，即就单独—胸导联信号通过提高频谱的分辨率来估计工频干扰的频率；基于最小均方误差准则来估计各导联信号中工频干扰的幅度和相位。文中还给出了该算法的流程图和滤波性能分析。模拟结果表明了该算法的有效性。应用该算法对心电地图仪中的工频干扰进行对消，取得了满意的结果。     

故县大坝坝基泥化性F_5断层的化学灌浆防渗加固处理

泥化软化性F_5断层是故县大坝坝基范围内最大的一条断层,位于左岸,对左坝肩的稳定极为不利,采用水泥灌浆处理无效,故改用化学灌浆处理。选用EAA化学浆材,采用“优选组合配方综合施灌”的创新施工工艺,效果良好,为今后低渗透性复杂的泥化软化性断层的防渗加固处理,提供了新的依据和途径。     

Financial strain, received support, anticipated support, and depressive symptoms in the People's Republic of China.

The purpose of this study is to examine the interface between financial strain, informal received economic support, informal anticipated financial support, and psychological distress in later life. Data provided by a large probability sample of older adults in the People's Republic of China reveal that the relationship between financial difficulty and psychological distress is stronger for older adults who receive more economic assistance. However, the results involving anticipated support are in the opposite direction. More specifically, the association between financial problems and psychological distress is lower for older adults who believe that others stand ready to help in the future should the need arise. A detailed theoretical rationale is developed to explain these results. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

双相活齿泵的工作原理

在活齿传动理论及齿轮泵工作原理相结合的基础上，介绍了双相活齿泵的结构及其工作原理，研究结果表明，双相活齿泵具有流量大、流量均匀性好、噪声低以及可变量等优点。     

A concise process technology for 3-D suspended radio frequency micro-inductors on silicon substrate

In this letter, a concise process technology is proposed for the first time to enable the fabrication of good quality three-dimensional (3-D) suspended radio frequency (RF) micro-inductors on bulk silicon, without utilizing the lithography process on sidewall and trench-bottom patterning. Samples were fabricated to demonstrate the applicability of the proposed process technology.     

Interfacial segregation of Ti in the brazing of diamond grits onto a steel substrate using a Cu-Sn-Ti brazing alloy

Diamond grits were brazed onto a steel substrate using a prealloyed Cu-10Sn-15Ti (wt pct) brazing alloy at 925 °C and 1050 °C. Due to the relatively high concentration of Ti in the brazing alloy, the braze matrix exhibited a composite structure, composed of β-(Cu,Sn), a Cu-based solid solution, and various intermetallic compounds with different morphologies. The reaction of Ti with diamond yielded a continuous TiC layer on the surfaces of the diamond grits. On top of the TiC growth front, an intermetallic compound, composed of Sn and Ti, nucleated and grew into a randomly interwoven fine lacey structure. An interfacial structure developed as the interwoven fine lacey phase was semicoherently bonded to the TiC layer, with the Cu-based braze matrix filling its interstices. The thickness of such a composite layer was increased linearly with the square root of isothermal holding time at 925 °C, complying with the law of a diffusion-controlled process. However, at 1050 °C, the segregation behavior of Ti and Sn to the interfaces between the TiC layer and the braze matrix diminished, due to the increased solubility of Ti in the Cu-based liquid phase. The enhanced dissolution of Ti in the Cu-based liquid phase at 1050 °C also caused the precipitation of rod-like CuTi with an average diameter of about 0.2 μm during cooling. SnTi₃ was the predominant intermetallic compound and existed in three different forms in the braze matrix. It existed as interconnected grains of large size which either floated to the surface of the braze matrix or grew into faceted grains. It also exhibited a nail-like structure with a mean diameter of about 1 μm for the rod section and a lamellar structure arising from a eutectic reaction during cooling.     

A random switching method for HPWM full-bridge inverter

To overcome the problem of unequal switching loss in power switches, in conventional hybrid pulse width modulation (HPWM) full-bridge inverters, a random switching method for HPWM full-bridge inverters is proposed. The proposed method equalizes switching losses of the four switches, while also providing good output performance