Observation of atomic steps on CaCO3 crystal surface

By using scanning polarization force microscopy,the deliquescence process and the atomic steps on the cleavage surface of CaCO3 in air were studied in situ.Under an exposure to medium umidity(-57%),the sloiw step movement has been observed.     

A novel technique for profiling the lateral n- dopingconcentrations of submicron LDD MOS devices

This paper reports a simple I-V method for the first time to determine the lateral lightly-doped source/drain (S/D) profiles (n^- region) of LDD n-MOSFETs. One interesting result is the direct observation of the reverse-short-channel effect (RSCE). It is observed that S/D n^- doping profile is channel length dependent if reverse short-channel effect exists as a result of the interstitial imperfections caused by Oxide Enhanced Diffusion (OED) or S/D implant. Not only the lateral profiles for long-channel devices but also for short-channel devices can be determined. One other practical application of the present method for device drain engineering has been demonstrated with a LATID MOS device drain engineering work. It is convincible that the proposed method is well suited for the characterization and optimization of submicron and deep-submicron MOSFETs in the current ULSI technology     

焦化防砂室内实验研究

油井防砂工艺技术的研究与发展对疏松砂岩油藏的正常开采至关重要.焦化防砂是通过向地层内注入热空气使原油在高温下发生氧化裂解生成焦炭从而将地层砂固结的一种防砂新技术.为了对该项技术进行全面系统的理论分析与评价,设计并制作了一套焦化防砂实验装置,利用该装置进行了焦化防砂室内实验研究.焦化效果以岩样的抗压强度进行评价,实验结果表明,影响焦化后岩样抗压强度的主要因素为空气最高温度、处理时间和空气流量.此外,对焦化处理后的岩样所作的岩样组成分析揭示出,稠油胶结机理为氧化作用使部分油分和胶质变成沥青质,沥青质受到高度的缩合作用而成为高分子量的甲苯不溶物.由于新生胶质的氧化比原生胶质的氧化困难得多,因此适合焦化防砂的油层,其原油必须含有一定量的原生胶质和沥青质.     

An experimental study of pathomorphology in the iris and ciliary body after intraocular lens implantation]

Recent studies have suggested that cytokines play a critical role in the pathophysiology of alopecia areata; however, no information is available regarding the difference in cytokine profiles in these patients. Serum levels of cytokines, including interferon gamma (IFN-gamma), tumor necrosis factor alpha, interleukin 1 alpha (IL-1 alpha), IL-2, IL-4, and IL-6, were measured using radioimmunoassay or enzyme-linked immunosorbent assay techniques in patients with the localized form and the extensive form (alopecia universalis). The serum levels of IL-1 alpha and IL-4 were significantly elevated in patients with the localized form. In contrast, the serum levels of IFN-gamma and IL-2 were significantly elevated in patients with the extensive form. These results indicate that immune responses in the localized form and the extensive form of alopecia areata are regulated by Th2 cytokines and Th1 cytokines, respectively.     

传输线衰减常数与柱形谐振器Q值的关系

文中严格地讨论了任意截面形状，任意模式的柱形谐振腔Ｑ值与构成该谐振器的传输线衰减常数间的关系，给出了更一般的公式，推广了Ｄａｖｉｄｓｏｎ和Ｓｉｍ－ｍｏｎｄｓ＾［１］、Ｂａｒｌｏｗ和Ｃｕｌｌｅｎ＾［２］以及Ｙｅｈ和Ｓｈｉｍａｂｕｋｕｒｏ＾［３，４］的结果。     

A neural network model for the wire bonding process

A crucial step in manufacturing microcircuits is the wire bonding process in which a very thin gold wire must be formed to connect two surfaces in the microcircuit. The quality of the wire bond can be measured by visual inspection and a pull test—both of which are high-reliability, high-cost approaches to statistical process control. Westinghouse wanted to develop a high-reliability, low-cost quality assurance system. In this paper, we report on a year-long study to construct a neural network model that is capable of predicting the quality of wire bonds. The results of our modeling efforts reveal that neural networks are useful tools for statistical process control problems.     

Synthesis of ultrafine LiCoO2 powders by the sol-gel method

Ultrafine high-temperature (HT) LiCoO₂ powders were synthesized by the sol-gel method using polyacrylic acid (PAA) as a chelating agent. The decomposition process of the gel precursor was examined to determine the crystallization temperature and the dependence of the physicochemical properties of HT-LiCoO₂ powders on the PAA quantity was extensively investigated. Polycrystalline HT-LiCoO₂ powders, composed of very uniformly sized ultrafine particulates with an average particle size of 30–50 nm and a specific surface area of 2.3–17 m²g^–1, could be obtained at the lower calcination temperature of 550 °C and the shorter calcination time of 1 h compared to the solid-state reaction.     

玻璃钢管道的特点,设计原理及选用时的注意事项

本文旨在通过对玻璃钢管道及其标准的发展历史、产品特点、基本设计原理、质量影响因素及选用时应注意的事项等方面的介绍，使用户与工程设计人员对该产品有一个比较全面的了解，以便更好地选用并受益于这种管材。     

厚壳玻璃钢艇体选材、铺层设计及工艺

本文涉及玻璃钢猎扫雷艇艇体材料的优选、铺层设计和工艺等内容。试验确定了以１６２９间苯聚酯树脂为基体、以９００ｇ／ｍ２无碱无捻粗纱短切毡（Ｍ）和８１０ｇ／ｍ２无碱无捻粗纱方格布（Ｒ）为增强体以及（Ｍ＋Ｒ）为基本铺层设计单元的方案。试验表明，按上述材料和铺层制作的层板，性能达到Ｌｅｒｉｃｉ和ＭＨＣ－５１艇壳层板的指标要求。