Mast cell activation and migration to lymph nodes during induction of an immune response in mice

The mast cell response in skin and lymph nodes was examined during the sensitization phase of dinitrofluorobenzene (DNFB)-induced contact hypersensitivity in mice. Degranulation of 62% of mast cells in DNFB-exposed skin was evident within 30 min of a dual application of DNFB, reaching a peak of 77% at 24 h, and persisting in 42% after 5 d. Abundant expression of macrophage inflammatory protein (MIP)-1alpha and MIP-1beta mRNAs and proteins was observed in keratinocytes, and mast cell degranulation was significantly inhibited after administration of neutralizing antibodies to MIP-1alpha, but not MIP-1beta. During DNFB sensitization, the mast cell density in the skin decreased by half, concurrent with a fivefold expansion of mast cell numbers in draining lymph nodes. Fluorescent-labeled mast cells injected into the skin appeared in draining lymph nodes after application of DNFB, followed by subsequent migration to the spleen. In lymph nodes, mast cells were an abundant and predominant source of MIP-1beta, neutralization of which partially inhibited T lymphocyte recruitment. These results indicate that mast cells contribute to the induction of this primary immune response by activation at and migration from the site of antigen encounter to draining lymph nodes, wherein they mediate T lymphocyte recruitment by production of MIP-1beta.     

Comparison of the resistance of C57BL/6 and C3H/He mice to infection with Mycobacterium paratuberculosis

Susceptibility of C57BL/6 (Bcgs) and C3H/HeN (Bcgr) mice to an intraperitoneal infection with Mycobacterium paratuberculosis strain 19698 was compared (by histopathology and the number of mycobacteria isolated from the spleen). Mycobacterial counts from the spleen of Bcgr mice progressively decreased over the course of infection but remained unchanged in Bcgs mice. Granulomatous lesions and acid-fast bacteria were consistently present in the liver and lymph nodes of Bcgs mice, whereas lesions were transient or absent in Bcgr mice. These results indicate that Bcgr mice are inherently resistant to M. paratuberculosis, whereas Bcgs mice are inherently susceptible. These differences may prove useful in elucidating the mechanisms of resistance and susceptibility to paratuberculosis and other mycobacterial infections.     

Physical fitness, physical activity, and functional limitation in adults aged 40 and older

PURPOSE: A cohort of middle-aged and older men and women were followed for an average of 5.5 yr to examine the association between physical fitness, physical activity, and the prevalence of functional limitation. METHODS: The participants received medical assessments between 1980 and 1988 and responded to a mail-back survey regarding functional status in 1990. RESULTS: Among 3495 men and 1175 women over 40 yr of age at baseline, 350 (7.5%) reported at least one functional limitation in daily or household activities at follow-up. The prevalence of functional limitation was higher among women than men. Physically fit and physically active participants reported less functional limitation than unfit or sedentary participants. After controlling for age and other risk factors, the prevalence of functional limitation was lower for both moderately fit (odds ratio = 0.4, 95% CI = 0.2-0.6) and high fit men (odds ratio = 0.3, 95% CI = 0.2-0.4), compared with low fit men. Corresponding figures for women were 0.5 (0.3-0.7) and 0.3 (0.2-0.5) for moderately fit and high fit women. The association between physical activity and functional limitation was similar to the data for physical fitness. CONCLUSIONS: These data support a protective effect of physical fitness and physical activity on functional limitation among older adults and extend this protective effect to middle-aged men and women.     

Disposition and elimination of meropenem in cerebrospinal fluid of hydrocephalic patients with external ventriculostomy

The broad antibacterial spectrum and the low incidence of seizures in meropenem-treated patients qualifies meropenem for therapy of bacterial meningitis. The present study evaluates concentrations in ventricular cerebrospinal fluid (CSF) in the absence of pronounced meningeal inflammation. Patients with occlusive hydrocephalus caused by cerebrovascular diseases, who had undergone external ventriculostomy (n = 10, age range 48 to 75 years), received 2 g of meropenem intravenously over 30 min. Serum and CSF were drawn repeatedly and analyzed by liquid chromatography-mass spectroscopy. Pharmacokinetics were determined by noncompartmental analysis. Maximum concentrations in serum were 84.7 +/- 23.7 microg/ml. A CSF maximum (CmaxCSF) of 0.63 +/- 0.50 microg/ml (mean +/- standard deviation) was observed 4.1 +/- 2.6 h after the end of the infusion. CmaxCSF and the area under the curve for CSF (AUCCSF) depended on the AUC for serum (AUCS), the CSF-to-serum albumin ratio, and the CSF leukocyte count. Elimination from CSF was considerably slower than from serum (half-life at beta phase [t1/2beta] of 7.36 +/- 2.89 h in CSF versus t1/2beta of 1.69 +/- 0.60 h in serum). The AUCCSF/AUCS ratio for meropenem, as a measure of overall CSF penetration, was 0.047 +/- 0.022. The AUCCSF/AUCS ratio for meropenem was similar to that for other beta-lactam antibiotics with a low binding to serum proteins. The concentration maxima of meropenem in ventricular CSF observed in this study are high enough to kill fully susceptible pathogens. They may not be sufficient to kill bacteria with a reduced sensitivity to carbapenems, although clinical success has been reported for patients with meningitis caused by penicillin-resistant pneumococci and Pseudomonas aeruginosa.     

The behavior of small fatigue cracks at notches in corrosive environments

The behavior of small cracks growing out of the roots of blunt notches in compact type specimens of an austenitic steel was characterized under fatigue loading in wet H ₂ plus air environment. The growth rates of cracks in the size range of 0.125 mm to 0.75 mm were up to two orders of magnitude higher than the rates expected for conventional cracks at equal stress intensity range, K. It was also observed that the small cracks grew at these fast rates only in corrosive environments when the loading frequency was 0.02 Hz or less. At a frequency of 10 Hz, the behavior was in agreement with the trend predicted for conventional size cracks.The above observations are rationalized in terms of the breakdown of the concept of a single parameter representation of the crack tip stress and strain field by K or in terms of differences in crack tip environments between small and long cracks for the same bulk environment. A simple engineering model is proposed which adequately represents the observed small crack growth behavior.

---

Résumé On a procédé à la caractérisation, sous charges de fatigue en atmosphère humide de H ₂ et d'air, de petites fissures se développant à partir des racines d'entailles arrondies dans des éprouvettes compactes.Les vitesses de croissance des fissures d'une taille allant de 0,125 à 0,750 mm se sont révélé être de deux ordres de grandeur plus grandes que les vitesses prévues dans le cas de fissures conventionnelle, soumises aux mêmes variations de l'intensité de contrainte K. On a également observé que de petites fissures croissaient à ces grandes vitesses seulement dans des atmosphères corrosives, lorsque la fréquence de sollicitation était de 0,02 Hz ou moins. A la fréquence de 10 Hz, le comportement observé s'est trouvé en accord avec les tendances prévues pour des fissures de taille conventionnelle.Les observations ci-dessus sont rationnalisées en un élargissement du concept de représentation monoparamétrique par le facteur K du champ de contraintes et de dilatation à l'extrémité de la fissure, ou en termes des différences rencontrées dans l'environnement local de l'extrémité d'une fissure, selon que celle-ci est longue ou courte, et ce dans un même environnement global.On propose un modèle simple utilisable en pratique, pour représenter de manière adéquate le comportement à la croissance observé pour des petites fissures.

---

---

Metallurgy Department     

Preparation and properties of (BATB–ODPA) polyimide–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene–4,4′‐oxydiphthalic anhydride (BATB–ODPA) polyimide (PI) and layered montmorillonite (MMT) clay were successfully prepared by an in situ polymerization reaction through thermal imidization up to 300°C. The synthesized PCN materials were subsequently characterized by Fourier‐Transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of material composition on thermal stability, mechanical strength, molecular permeability and optical clarity of bulk PI and PCN materials in the form of membranes were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), molecular permeability analysis (GPA) and ultraviolet‐visible (UV/VIS) transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1072–1079, 2004     

The Influence of Diphenyl Siloxane on Morphology and Physical Properties in the Poly(Imide Siloxane)(PIS) Copolymer

Various numbers of diphenyl-siloxane groups were incorporated in α,ω-bis(aminopropyl)polydimethylsiloxane (APPS) to prepare α,ω-bis(aminopropyl)-polydimethyldiphenylsiloxane (APPPS) oligomers of three different number-average molecular weights(Mn = 547,772,1210 g mol⁻¹).These APPPS oligomers were than used, together with 3,3′,4,4′-bezonphenone tetracarboxylic dianhydride (BTDA) and 2-2′-bis[4-(3-aminophenoxy)phenyl] sulfone (m-BAPS), to synthesize a series of APPPS containing poly(imide siloxane) (PIS) copolymers. Microstructural studies showed that at certain APPPS content, a critical microphase separation point existed, beyond which, microphase separation began to develop. This critical point of microphase separation was found to be affected by the Mn of the APPPS oligomers (8.0, 4.3 and 2.1 mol% for Mn of 547, 772 and 1,210 g mol⁻¹, respectively). Diphenyl-siloxane significantly improved compatibility between polyimide and polysiloxane segments. Physical studies showed that the introduction of diphenyl siloxane changed the thermal stabilities and mechanical properties of the PIS copolymers. These findings have potential applications for design purposes in engineering polymers.     

Fischer–Tropsch synthesis. Compositional changes in an iron catalyst during activation and use

The equilibrium phase compositions of iron have been calculated for gas compositions that could be encountered during the Fischer–Tropsch synthesis. The gas compositions measured experimentally for CO conversion levels in the 30–90% range show that iron should be present as the carbide phase. However, experimental characterization of iron catalysts show that a significant fraction of the iron is present as Fe₃O₄ following synthesis for several days. A model that can account for the experimental catalyst phase composition and the gases present in the reactor would have a core of Fe₃O₄ and an outer layer of iron carbides.