Reconfigurable parallel inner product processor architectures

This paper presents a novel approach for low-power high-performance inner product processor design. The processor is dynamically reconfigurable for computing inner products of input arrays with four or more combinations of array dimensions and precision. The processor mainly consists of an array of 8×8 or 4×4 small multipliers plus two or three arrays of adders. It requires very simple reconfigurable components. The whole network may be reconfigured by using a few control bits for the desired computations, and the reconfiguration can be done dynamically. The design is regular, modular, and can easily be pipelined, and most parts of the network are symmetric and repeatable. A set of low-power high-performance parallel counters is also proposed for the implementation of the design, which could lead to a significant reduction in worst case power dissipation compared with traditional binary-logic based architectures, while showing superiority in speed, VLSI area, and layout simplicity     

Hydrocarbon preservation and formation water geochemistry in abnormal pressure system in the Bawu area of Lishu depression,Songliao Basin,China

The hydrocarbon production in the Bawu area of Lishu Depression is high. However, the Bawu area has undergone three main tectonic movements, the strata were strongly uplifted and eroded, and the fractures were extremely developed. The conditions of hydrocarbon preservation have become intricate. In this study, by analyzing isotopes compositions and geochemical features of formation water, and the characteristics of formation pressure, the hydrocarbon preservation can be deduced. The subnormal and lower normal pressure zones (away from Xiaokuan Fault) of Yingcheng and Shahezi Formations are relatively closed and more conducive to hydrocarbon preservation.     

南京互动电视平台的建设与运营

本文介绍了南京广电网络互动电视平台的总体戎麒南京广电网络有限责任公司数字电视中心副经理发展战略、设计建设特点和业务运营思路,详细阐述了互动电视技术系统建设中的关键技术选择、技术创新点和业务宣传营销实践中的理念和策略.     

分布式多元胞集成半导体放电管的设计与工艺

介绍了一种分布式多元胞集成半导体放电管的结构设计和工艺方法。在保持传统单元胞放电管器件表面总面积和放电管纵向剖面NPNPN五层结构不变的情况下,将放电管发射区等分成2(N+1)2个(N取0,1,2,3,4),构成在基区中心对称的多元胞结构。该结构优化了放电管阴极发射区的分布,使浪涌电流在整个芯片平面上趋于均匀,降低了发射区的热量集中效应;同时增加了电流放大系数,减少了放电管的开通时间。采用镓扩散、玻璃钝化等工艺流程,制作出分布式多元胞集成半导体放电管,解决了单元胞放电管散热不均匀、响应速度慢及可靠性差的问题。雷电波冲击电流测试表明,该结构提高了器件的抗电涌能力,可广泛应用于通信领域的雷电防护。     

移动通信数据业务的功率控制

运用统计线性化的数值分析的方法（把非线性的功率控制方程线性化）,研究了在第三代移动通信中,短时数据业务在功率控制下的性能,提出了在移动台根据定位信息动态预定发射功率的方法,来补偿信道衰落,从而更好地消除远近效应,数值分析说明了这种方法的有效性。     

Electric Potential in a Dielectric Sphere Head Produced by a Time-Harmonic Equivalent Current Dipole

A time-harmonic equivalent current dipole model is proposed to simulate EEG source which deals with the problem concerning the capacitance effect. The expressions of potentials in both homogeneous infinite dielectric medium and dielectric sphere on the electroquasistatic condition are presented. The potential in a 3-layer inhomogeneous spherical head is computed by using this model. The influences on potential produced by time-harmonic character and permittivity are discussed. The results show that potentials in dielectric sphere are affected by frequency and permittivity.     

In-line optical fiber polarizer and modulator coated withLangmuir-Blodgett films

In-line optical fiber polarizer and modulator were fabricated by depositing Langmuir-Blodgett (LB) films on polished fiber surface with gold layer. The thickness of LB film was adjusted by changing the number of monolayers, which then optimized the performance of the fiber polarizer. Good agreement was observed between the theoretically predicted conditions for efficient coupling and the experimentally determined conditions for high TM/TE extinction ratio of the optical field. By applying an electric field between the LB film, the polarization state of the lightwave in the optical fiber can be modulated     

基于平方根电路的电流模式乘法/除法器的实现

根据MOS管的跨导线性原理,设计了一个电流模式平方根电路.以该电路为基本模块,综合设计出一种新颖的电流模式乘法/除法器.采用TMSC 0.35 μm CMOS集成工艺,对设计出的电路进行PSPICE仿真测试.结果表明,提出的电路具有带宽宽、功耗低、线性度好等优点,可以作为一个基本模块在电流模式电路中使用.     

基WMSA信道估计技术的WCDMA上行链路性能分析

本文对用控制信道中的导频符号,有杉多时隙加权平均信道估计技术的ＷＣＤＭＡ上行链路进行了性能仿真研究。仿真结果表明,参与信道估计的时隙数目、加权系数的选取应针对不同的信道衰落环境。结合仿真结果,讨论分析了前向纠划、ＲＡＫＥ接收机的指峰数及信道中可分解路径的平均功率之差对ＷＣＤＭＡ上行链路性能的影响。