Subjective perception of safety in healthy individuals working with 7 T MRI scanners: a retrospective multicenter survey

Objective

To retrospectively assess perception of safety of healthy individuals working with human 7 Tesla (T) magnetic resonance imaging (MRI) scanners.

Materials and methods

A total of 66 healthy individuals with a mean age of 31 ± 7 years participated in this retrospective multicentre survey study. Nonparametric correlation analysis was conducted to evaluate the relation between self-reported perception of safety and prevalence of sensory effects while working with 7 T MRI scanners for an average 47 months.

Results

The results indicated that 98.5 % of the study participants had a neutral or positive feeling about safety aspects at 7 T MRI scanners. 45.5 % reported that they feel very safe and none of the participants stated that they feel moderately or very unsafe while working with 7 T MRI scanners. Perception of safety was not affected by the number of hours per week spent in the vicinity of the 7 T MRI scanner or the duration of experience with 7 T MRI. More than 50 % of individuals experienced vertigo and metallic taste while working with 7 T MRI scanners. However, participants’ perceptions of safety were not affected by the prevalence of MR-related symptoms.

Conclusions

The overall data indicated an average perception of a moderately safe work environment. To our knowledge, this study delineates the first attempt to assess the subjective safety perception among 7 T MRI workers and suggests further investigations are indicated.

     

Synthesis of BaTiO3 by soft chemistry routes

In this paper we report a comparison concerning the properties of BaTiO₃ (BTO) ceramics obtained by two soft chemical routes, modified Pechini method and thermal decomposition of oxalate-based precursor. XRD data show the formation of single phase BaTiO₃ with tetragonal symmetry when the polymeric citrate-based precursor was annealed at 850 °C, 2 h. In the case of oxalate based-precursor, longer thermal treatment is required to obtain BaTiO₃ free of any secondary phases. For BaTiO₃ powders prepared by modified Pechini method, TEM and SEM investigations revealed the obtaining of uniformly sized particles forming spherical agglomerates inside large, non-uniform and partially sintered aggregates. The powders synthesized via oxalate route show particles of various sizes, with the same tendency of spherical agglomerates formation, but unlike the modified Pechini synthesis, more uniform and smaller aggregates with well-defined hexagonal-like shape were noticed. The relative permittivity values of 6,478 and 5,088 at Curie temperatures of 127 and 130 °C and low dielectric losses (tan δ?=?0.012) at room temperature were obtained for ceramic samples synthesized via Pechini method and oxalate route, respectively.     

The Effect of the Ionizing Radiation on Hydroxyapatite–Polydimethylsiloxane Layers

The bio hydroxyapatite (HAp) was used from a long time in different medical and environmental applications. The HAp layers with a uniform surface were used for various medical applications such as orthopedic and dental metal implants. In this work, we reported on the influence of X‐ray radiation on the structural and morphological properties of composite layers based on HAp and polydimethylsiloxane (PDMS) deposited on titanium substrates. The HAp:PDMS layers were investigated by different complementary methods such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and glow discharge optical emission spectrometry (GDOES). FTIR spectral analysis showed that the molecular structure of the coatings was not changed after their irradiation even though, the depth profile analysis performed by GDOES indicated a depletion of Ca and P elements from the HAp:PDMS irradiated samples. By SEM, we showed that the morphological features of the coatings were also changed, as the irradiated layers are delaminated. The biological assays confirmed that the antibacterial activity of HAp:PDMS composite layers increased after irradiation. The results obtained in this study highlighted that the biological properties of HAp:PDMS layers could be influenced by irradiation. POLYM. ENG. SCI., 59:2406–2412, 2019. © 2019 Society of Plastics Engineers     

Development and characterization of bionanocomposites based on poly(3‐hydroxybutyrate) and cellulose nanocrystals for packaging applications

Poly(3‐hydroxybutyrate) (PHB)‐based bionanocomposites were prepared using various percentages of cellulose nanocrystals (CNCs) by a solution casting method. CNCs were prepared from microcrystalline cellulose using sulfuric acid hydrolysis. The influence of CNCs on PHB properties was evaluated using differential scanning calorimetry, Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetry and tensile testing. Vapor permeation and light transmission of the materials were also measured. Differential scanning calorimetric tests demonstrated that CNCs were effective PHB nucleation agents. Tensile strength and Young's modulus of PHB increased with increasing CNC concentration. Moreover, the PHB/CNC bionanocomposites exhibited reduced water vapor permeation compared to neat PHB and had better UV barrier properties than commodity polymers such as polypropylene. It was found that nanocomposites with 6 wt% of CNCs had the optimum balance among thermal, mechanical and barrier properties. © 2016 Society of Chemical Industry     

Breakage of wet flexible fiber agglomerates impacting a plane

The breakage of an agglomerate of wet flexible fibers impacting a plane is computationally investigated in this work using the discrete element method. In the agglomerate, the fibers stick together due to cohesive liquid bridge forces. Agglomerate breakage with various impact conditions, initial configurations, fiber properties, and liquid bridge properties is systematically investigated. The degree of breakage is governed by the impact energy, the cohesion energy due to liquid bridges, the energy dissipation/absorption through fiber–fiber contacts and fiber deformation, and the efficiency of force transmission within the agglomerate. More specifically, breakage is promoted by increasing impact velocity, decreasing agglomerate size, increasing initial compaction, increasing fiber bending modulus, decreasing liquid surface tension, and decreasing liquid-to-solid volume ratio. Breakage is strongly dependent on the modified Weber number, that is, the ratio of the Weber number to a dimensionless rupture distance, which is a measure of the impact energy relative to the cohesion energy.     

Advances in Lupus Nephritis Pathogenesis: From Bench to Bedside

Systemic lupus erythematosus (SLE) is the prototype of autoimmune disorders caused by a loss of tolerance to endogenous nuclear antigens triggering an aberrant autoimmune response targeting various tissues. Lupus nephritis (LN), a major cause of morbidity and mortality in patients with SLE, affects up to 60% of patients. The recent insights into the genetic and molecular basis of SLE and LN paved the way for newer therapies to be developed for these patients. Apart from the traditional B-cell-centered view of this disease pathogenesis, acknowledging that multiple extrarenal and intrarenal pathways contribute to kidney-specific autoimmunity and injury may help refine the individual therapeutic and prognostic characterization of such patients. Accordingly, the formerly induction-maintenance treatment strategy was recently challenged with the exciting results obtained from the trials that evaluated add-on therapy with voclosporin, belimumab, or Obinutuzumab. The scope of this review is to provide an insight into the current knowledge of LN pathogenesis and future therapeutic strategies.     

Dodecatungstocobaltate supported over ZSM-5 zeolite as novel solid catalyst in selective sulfide oxidation

The catalytic behavior of a Keggin type potassium dodecatungstocobaltate (II) salt supported on ZSM-5 zeolite for wet peroxide oxidation of 2-(methylthio)benzothiazole, as a model organic sulfide, was thoroughly studied. Microporous ZSM-5 zeolite was obtained by the hydrothermal crystallization method. The Keggin salt was incorporated in the MFI zeolite matrix by the wet impregnation method followed by calcination at 350 °C. Catalysts were further characterized by X ray diffraction, UV–Vis diffuse reflectance spectroscopy and scanning electron microscopy-EDAX techniques. Supported and bulk Keggin dodecatungstocobaltate (II) were compared with pure H-ZSM-5 zeolite as catalysts for the sulfide oxidation. When the reaction was not catalyzed, just a 9 mol% of sulfide conversion was obtained. Reaction parameters, such as nature of the solvent, hydrogen peroxide concentration, reaction time, catalyst mass, substrate initial concentration and reaction temperature, were evaluated to reach the optimum reaction conditions, considering substrate conversion and sulfoxide and sulfone selectivities. Catalyst stability in several oxidation cycles was also examined.     

Active learning through collaborative knowledge building using an automatic free-text scoring system in a b-learning environment

According to active learning, students should be responsible for their own learning. Automatic free-text scoring allows teachers to provide open-ended questions with their correct answers to a computer system, so when students answer the questions, they get immediate feedback (a score, a comment, or both). However, teachers are usually overloaded with many tasks, and they may not have time to create the questions with the correct answers. Therefore, in the 2012/2013 academic year, we asked a group of 124 Pre-Primary and Primary Education students to become the creators of the questions and their correct answers in groups in a free-text scoring system, so the questions use learners’ language, not teachers’ language. From them, 41 students (group of involved students, GIS) fulfilled all the requirements during the course. Our hypothesis was that GIS would be able to increase their academic performance and levels of engagement compared to the rest of the students. The results gathered provide statistic evidence to support that hypothesis. This study pretends to help teachers who want to increase the academic performance and levels of engagement of their students in courses that they may find boring and unrelated to the main topic of their degree, or not directly related with their main academic interests.     

Toward emotional interactive videogames for children with autism spectrum disorder

Universal Access in the Information Society - Technology and videogames have been proven as motivating tools for working attention and complex communication skills, especially in children with...