DNA detection on plastic: surface activation protocol to convert polycarbonate substrates to biochip platforms

A mild and efficient surface activation protocol to convert polycarbonate (PC) substrates, e.g., plastic bases of compact disks, to biochip platforms for DNA probe immobilization and target detection is described. The preparation procedure (activation, patterning, and coupling) is simple and effective; the on-chip hybridization is sensitive and selective. Particularly, UV/ozone treatment of PC sheets produces a hydrophilic surface with a high density of reactive carboxylic acid groups [(4.8 +/- 0.2) x 10-10 mol/cm2] in less than 10 min at ambient conditions, and no significant aging or physical damage to the substrate is observed. Covalent immobilization of DNA probes via both passive (reagent-less photopatterning and coupling in bulk solution phase) and flow-through (creation of microarrays with microfluidic channel plates) procedures has been demonstrated. Subsequent hybridization shows uniform and strong fluorescent signals for complementary target DNA and allows clear discrimination between fully complementary targets and strands with a single base-pair mismatch. The surface chemistry described herein will facilitate the development of disposable plastic biochips (not limited to DNA microarrays) and the fabrication of biomedical devices that are readable with conventional optical drives.     

A simple method to control the diameter of carbon nanotubes and the effect of the diameter in field emission

We developed a simple method to control the diameter of carbon nanotubes (CNTs) and studied the effect of the diameter of CNTs in field emission. We fabricated Fe nanoparticle arrays of uniform size by filling Fe ion solution in the pores of the anodic aluminum oxide membrane bonded to a silicon wafer. Then we used them as catalysts to fabricate CNTs at a high temperature of 950 °C. The diameter of the nanoparticles could be controlled by changing the concentration of Fe ion solutions and consequently that of CNTs from 5 to 20 nm. Coating the Si wafers with gold greatly increased the field emission. The CNTs showed a good field emission property of a low turn-on field (1.8 V/μm), very high current density (94 mA/cm²) and long-term stability (5 h for 10% degradation of current density from 1 mA/cm²). Decreasing the diameter of the CNTs increased the field emission, while the field emission stability was almost unaffected by the diameter and length.     

Intra-Asia trade and foreign direct investment

This article reconsiders the patterns of intra-Asia trade and the linkages with foreign direct investment (FDI) in this region. The following conclusions are drawn. Firstly, by 1985 intra-Asia trade exhibited both distinct patterns of inter-industry trade on the one hand, and intra-industry trade on the other. Secondly, the patterns of trade in this region have not changed since 1985 from vertical to horizontal, but from a “flying-geese” to an “acrobatic” type, due to the sharp increase in FDI within the region. Thirdly, since the early 1990s, FDI began to shift to China due to the wage differentials between China and other East Asian countries. This made the countries of East Asia compete with one another, rushing to obtain capital and financial resources from all over the world – ultimately contributing to recent financial and economic turbulence in the region. The article concludes with some brief policy recommendations on how to avoid a recurrence of the Asian crisis in the 21 century. Received: 18 August 1997 / Accepted: 16 December 1998     

Flavonoids Seen through the Energy Perspective

In all life forms, opposing forces provide the energy that flows through networks in an organism, which fuels life. In this concept, health is the ability of an organism to maintain the balance between these opposing forces, which creates resilience, and a deranged flow of energy is the basis for diseases. Treatment should focus on adjusting the deranged flow of energy, e.g., by the redox modulating activity of antioxidants. A major group of antioxidants is formed by flavonoids, a group of polyphenolic compounds abundantly present in our diet. The objective here is to review how the redox modulation by flavonoids fits in the various concepts on the mode of action of bioactive compounds, so we can ‘see’ where there is overlap and where the missing links are. Based on this fundament, we should choose our research path aiming to ‘understand’ the redox modulating profile of specific flavonoids, so we can ultimately rationally apply the redox modulating power of flavonoids to improve our health.     

The miRNA-21-5p Payload in Exosomes from M2 Macrophages Drives Tumor Cell Aggression via PTEN/Akt Signaling in Renal Cell Carcinoma

M2 macrophages in the tumor microenvironment are important drivers of cancer metastasis. Exosomes play a critical role in the crosstalk between different cells by delivering microRNAs or other cargos. Whether exosomes derived from pro-tumorigenic M2 macrophages (M2-Exos) could modulate the metastatic behavior of renal cell carcinoma (RCC) is unclear. This study found that M2-Exos promotes migration and invasion in RCC cells. Inhibiting miR-21-5p in M2-Exos significantly reversed their pro-metastatic effects on RCC cells in vitro and in the avian embryo chorioallantoic membrane in vivo tumor model. We further found that the pro-metastatic mechanism of miR-21-5p in M2-Exos is by targeting PTEN-3′UTR to regulate PTEN/Akt signaling. Taken together, our results demonstrate that M2-Exos carries miR-21-5p promote metastatic features of RCC cells through PTEN/Akt signaling. Reversing this could serve as a novel approach to control RCC metastasis.     

National electricity planning in settings with low pre-existing grid coverage: Development of a spatial model and case study of Kenya

We develop a spatial electricity planning model to guide grid expansion in countries with low pre-existing electricity coverage. The model can be used to rapidly estimate connection costs and compare different regions and communities. Inputs that are modeled include electricity demand, costs, and geographic characteristics. The spatial nature of the model permits accurate representation of the existing electricity network and population distribution, which form the basis for future expansion decisions. The methodology and model assumptions are illustrated using country-specific data from Kenya. Results show that under most geographic conditions, extension of the national grid is less costly than off-grid options. Based on realistic penetration rates for Kenya, we estimate an average connection cost of $1900 per household, with lower-cost connection opportunities around major cities and in denser rural regions. In areas with an adequate pre-existing medium-voltage backbone, we estimate that over 30% of households could be connected for less than $1000 per connection through infilling. The penetration rate, an exogenous factor chosen by electricity planners, is found to have a large effect on household connection costs, often outweighing socio-economic and spatial factors such as inter-household distance, per-household demand, and proximity to the national grid.     

Generalized approach for modeling minimally invasive surgery as a stochastic process using a discrete Markov model

Minimally invasive surgery (MIS) involves a multidimensional series of tasks requiring a synthesis between visual information and the kinematics and dynamics of the surgical tools. Analysis of these sources of information is a key step in defining objective criteria for characterizing surgical performance. The Blue DRAGON is a new system for acquiring the kinematics and the dynamics of two endoscopic tools synchronized with the endoscopic view of the surgical scene. Modeling the process of MIS using a finite state model [Markov model (MM)] reveals the internal structure of the surgical task and is utilized as one of the key steps in objectively assessing surgical performance. The experimental protocol includes tying an intracorporeal knot in a MIS setup performed on an animal model (pig) by 30 surgeons at different levels of training including expert surgeons. An objective learning curve was defined based on measuring quantitative statistical distance (similarity) between MM of experts and MM of residents at different levels of training. The objective learning curve was similar to that of the subjective performance analysis. The MM proved to be a powerful and compact mathematical model for decomposing a complex task such as laparoscopic suturing. Systems like surgical robots or virtual reality simulators in which the kinematics and the dynamics of the surgical tool are inherently measured may benefit from incorporation of the proposed methodology.     

Bioethanol production from ball milled bagasse using an on-site produced fungal enzyme cocktail and xylose-fermenting Pichia stipitis

Sugarcane bagasse is one of the most promising agricultural by-products for conversion to biofuels. Here, ethanol fermentation from bagasse has been achieved using an integrated process combining mechanical pretreatment by ball milling, with enzymatic hydrolysis and fermentation. Ball milling for 2 h was sufficient for nearly complete cellulose structural transformation to an accessible amorphous form. The pretreated cellulosic residues were hydrolyzed by a crude enzyme preparation from Penicillium chrysogenum BCC4504 containing cellulase activity combined with Aspergillus flavus BCC7179 preparation containing complementary β-glucosidase activity. Saccharification yields of 84.0% and 70.4% for glucose and xylose, respectively, were obtained after hydrolysis at 45 °C, pH 5 for 72 h, which were slightly higher than those obtained with a commercial enzyme mixture containing Acremonium cellulase and Optimash BG. A high conversion yield of undetoxified pretreated bagasse (5%, w/v) hydrolysate to ethanol was attained by separate hydrolysis and fermentation processes using Pichia stipitis BCC15191, at pH 5.5, 30 °C for 24 h resulting in an ethanol concentration of 8.4 g/l, corresponding to a conversion yield of 0.29 g ethanol/g available fermentable sugars. Comparable ethanol conversion efficiency was obtained by a simultaneous saccharification and fermentation process which led to production of 8.0 g/l ethanol after 72 h fermentation under the same conditions. This study thus demonstrated the potential use of a simple integrated process with minimal environmental impact with the use of promising alternative on-site enzymes and yeast for the production of ethanol from this potent lignocellulosic biomass.