Friction and wear of Inconel 690 and Inconel 600 for steam generator tube in room temperature water

In the steam generators of nuclear power plants, the flow of cooling water can cause the tubes to vibrate, resulting in fretting wear damage due to contacts between these tubes and their supports. The tubes are made of Inconel 690 and Inconel 600 and the supports are made of STS 304. In this paper, fretting wear tests in water were performed using the materials Inconel 690 and Inconel 600 in contact with STS 304. Fretting tests using a cross-cylinder type set up were conducted under various vibrating amplitudes and applied normal loads in order to measure friction forces and wear volumes. Also, conventional sliding tests using a pin-on-disk type set up were carried out to compare these test results.In the fretting tests, friction force was found to be strongly dependent on normal load and vibrating amplitude. Coefficients of friction decreased with an increase in the normal load and a decrease in the vibrating amplitude applied. Also, the wear of Inconel 600 and Inconel 690 was predicted using a work rate model. Depending on the normal load and vibrating amplitude applied, distinctively different wear mechanisms and often drastically different wear rates occurred. It was found that the fretting wear coefficients for Inconel 600 and Inconel 690 were 9.3×10⁻¹⁵ and 16.2×10⁻¹⁵ Pa⁻¹, respectively. This study shows that Inconel 690 can result in lesser friction forces and exhibits less wear resistance than Inconel 600 in room temperature water.     

Extrahepatic metabolism of 4-methylumbelliferone and lidocaine in the anhepatic rabbit

OBJECTIVE: The initially well-fixed implants of total hip replacement (THR) are in the long-term subject to aseptic loosening. Many cytokines can contribute to osteolysis due to osteoclast recruitment and/or activation. However, in this respect tumor necrosis factor-alpha (TNF-alpha) plays a pivotal role, because it upregulates interleukin-1 and 6 and granulocyte-macrophage colony stimulating factor. The aim of this study was to assess the eventual presence, cellular localization and extent of expression of TNF-alpha in the synovial-like membrane at the implant or at the cement to bone interface compared to control synovial membrane. METHODS: Twenty samples from the synovial-like membrane of the periprosthetic tissues were compared to control samples. TNF-alpha containing cells were visualized using an avidin-biotin-peroxidase complex (ABC) method and analyzed by light microscopy, double labelling and image analysis. RESULTS: TNF-alpha was found in the periprosthetic tissues in fibroblasts and vascular endothelial cells, but mainly in the macrophages was it found to coincide with areas containing implant-derived debris. TNF-alpha containing cells were more numerous in the synovial-like membrane in the interface tissue from the proximal stem area (2816 +/- 318 cells) than in the control synovial membrane (565 +/- 93 cells, p < 0.01). Interestingly, similarly high TNF-alpha expression (3452 +/- 582 cells) was also seen in the synovial-like membrane of the pseudocapsule. CONCLUSION: These findings suggest that the foreign body-type host reaction caused by THR is characterized by the high expression of TNF-alpha. Because such expression occurred in the interface tissue between the implant and surrounding bone, TNF-alpha, due to its pivotal direct and indirect role in the activation and recruitment of osteoclasts, may contribute to periprosthetic osteolysis and to the loosening of THR.     

Evidence for McKusick''s hypothesis of deficient collagen cross-linking in patients with homocystinuria

Fractionation of the venom of the spider Phoneutria nigriventer revealed that it was a mixture of several neurotoxic peptides. The peptides so far characterized either inhibited or induced neurotransmitter release. These effects were mediated by Ca2+ channels or increasing Na+ permeability through voltage sensitive Na(+)-channels, respectively. The pooled toxic components (fraction P4) showed stimulatory effects on acetylcholine release from brain cortical slices. In addition, a component of the observed effects resembling that of alpha-latrotoxin was identified, which was characterized by the ability to provoke release of acetylcholine (ACh) at low temperature and in a manner independent of extracellular Ca2+ and of voltage sensitive Na(+)-channels.     

Construction and characterization of a set of E. coli strains deficient in all known loci affecting the proteolytic stability of secreted recombinant proteins

Even though secretion offers numerous advantages for the production of proteins in Escherichia coli, the expression of many heterologous proteins is severely limited by degradation in the periplasmic space. We found that mutations in rpoH, the RNA polymerase sigma factor responsible for heat shock protein synthesis, affect the stability of heterologous secreted proteins. A particularly dramatic increase in expression was further observed in rpoH degP double mutants. To minimize proteolytic degradation, we constructed a family of 25 isogenic strains deficient in all known cell envelope proteases (DegP, Protease III, Tsp(Prc), and OmpT), as well as the rpoH15 mutant allele, and characterized their growth in both shake flasks and fermentors. The availability of this set of strains permits the selection of a suitable host based on the optimal combination between the optimum reduction in protease activity and acceptable growth properties.     

Drug release from heat-treated polyvinyl alcohol films

Polyvinyl alcohol (PVA) films containing 10% w/w of a model drug, sulphathiazole, were cast from aqueous solutions and subjected to heat treatment at specific temperatures for known periods of time. Heat treatment at temperatures above the T_g of the PVA films slowed down the rate of drug release from the films. Increasing the temperature of heat treatment from 120°C to 160°C further decreased the rate of drug release. On the other hand, if the heat treatment were conducted at a temperature below the T_g e.g. at 80°C, there were insignificant differences between the release profile of sulphathiazole from heat-treated films and that from untreated films. The duration of heat treatment affected the rate of drug release to a smaller extent compared to the temperature of heat treatment. These results correlated with the heat induced changes in the morphology of, and in the extent of water uptake by the PVA films.     

Symmetry breaking and training from incomplete data with Radial Basis Boltzmann Machines

A Radial Basis Boltzmann Machine (RBBM) is a specialized Boltzmann Machine architecture that combines feed-forward mapping with probability estimation in the input space, and for which very efficient learning rules exist. The hidden representation of the network displays symmetry breaking as a function of the noise in the dynamics. Thus, generalization can be studied as a function of the noise in the neuron dynamics instead of as a function of the number of hidden units. We show that the RBBM can be seen as an elegant alternative of k-nearest neighbor, leading to comparable performance without the need to store all data. We show that the RBBM has good classification performance compared to the MLP. The main advantage of the RBBM is that simultaneously with the input-output mapping, a model of the input space is obtained which can be used for learning with missing values. We derive learning rules for the case of incomplete data, and show that they perform better on incomplete data than the traditional learning rules on a 'repaired' data set.     

FDG PET of the retroperitoneum: normal anatomy, variants, pathologic conditions, and strategies to avoid diagnostic pitfalls

Evaluation of the retroperitoneum is important to assess the extent of retroperitoneal malignancies and because the retroperitoneum is a route of nodal spread for other malignancies. Positron emission tomography (PET) with 2-[fluorine-18]fluoro-2-deoxy-D-glucose (FDG) allows detection of small malignant nodes not identified or not meeting size criteria for malignancy with computed tomography (CT) and tumor recurrences in surgical beds that are otherwise difficult to assess. However, evaluation of retroperitoneal malignancies or adenopathy with FDG PET can be complicated by urinary and colonic activity or anatomic variants. Urinary artifacts are avoided with intravenous hydration, administration of furosemide, and catheterization and retrograde filling of the bladder with saline solution. Colonic artifacts are avoided by cleansing the bowel with an isosmotic solution. FDG PET is useful in assessing the retroperitoneum for adenopathy in malignancies such as testicular cancer; lymphoma; and rectal ovarian, or cervical cancer that spread along retroperitoneal lymphatics. FDG PET is especially useful for detection of malignant nodes that do not meet size criteria at CT or when lack of retroperitoneal fat makes it difficult to identify retroperitoneal nodes with CT. FDG PET has an important role in evaluation of postoperative beds, where CT has limited useful because of altered anatomy, surgical clip artifacts, and scar issue.     

A three-dimensional model for suspension-to-membrane-wall heat transfer in circulating fluidized beds

A three-dimensional model is proposed for both furnace-side and wall-side heat transfer in circulating fluidized beds with membrane walls. Following previous publications (Int. J. Heat Mass Transfer (2003a, b)), a core-annulus flow structure is employed in the model, with consideration of the membrane wall influence on bed hydrodynamics. The model couples radiation, conduction and convection on the furnace side to conduction and convection on the wall side. Radiation in the wall layer is simulated by the moment method. A finite-element method is employed to solve the set of non-linear, partial differential equations. The solution is demonstrated for a typical example. The model gives predictions of suspension-to-wall heat transfer which show satisfactory agreement with published experimental data.     

机械总院研发立式冷摆动辗压机填补国内空白

机械科学研究总院北京机电研究所承担“2000KN立式冷摆动辗压机开发研究”项目通过验收,研发的2000kN矿式冷摆动辗压机具有自主知识产权,填补了国内空白,达到国际先进水平,人选“2013度中关村科技园区首台（套）重大技术装备试验、示范项目。