利用试井资料评价压裂地质效果

依据裂缝井试井解释理论，利用实测试井资料对压裂地质效果进行了深入剖析。通过部分探井措施后增产效果实例研究，把压裂地质效果分为三种类别；并从地质角度出发，详细分析了优选压裂井层的依据。为油气井合理开发和制定增产措施提供参考依据。     

Enhancement of islanding-detection of distributed generation systems via wavelet transform-based approaches

In this paper, a wavelet transform-based approach is proposed to detect the occurrence of islanding events in distributed generation systems. Thanks to time–frequency localization capabilities exhibited by wavelet transform, the approach embedded with this transform technique has grasped the appearance of the islanding event in a highly effective manner. Moreover, for those regions which are in need of a better visualization, the proposed approach would serve as an efficient aid such that the mains power disconnection can be better distinguished. To validate the feasibility of this approach, the method has been validated through several scenarios. Test results supported the effectiveness of the method for the application considered.     

A further result on global stabilization of oscillators with bounded delayed input

This note revisits the problem of globally stabilizing an oscillator with a bounded delayed input. It establishes that an oscillator with input saturation can be globally asymptotically stabilized by a linear state feedback even in the presence of an arbitrarily large delay in the input. This result strengthens a recent result in the literature, which shows that such an oscillator can be globally asymptotically stabilized with a sufficiently small control input and the magnitude of the control input goes to zero as the delay increases to infinity. The controller constructed in this note thus improves the efficiency of the closed-loop system by fully utilizing the actuator capacity.     

Low Electrical Percolation Threshold of Silver and Copper Nanowires in Polystyrene Composites

Silver and copper nanowires have been synthesized using a scalable method of AC electrodeposition into porous aluminum oxide templates, which produces gram quantities of metal nanowires ca. 25 nm in diameter and up to 5 and 10 μm in length for Ag and Cu, respectively. The nanowires have been used to prepare polystyrene nanocomposites by solution processing. Electrical resistivity measurements performed on polymer nanocomposites containing different volume fractions of metal indicate that low percolation thresholds of nanowires are attained between compositions of 0.25 and 0.75 vol %.     

An ARQ scheme using combined QPSK and BPSK transmissions

We propose a hybrid ARQ scheme which uses QPSK modulation for the first transmission and BPSK modulation for retransmissions. The throughput performance of the proposed ARQ scheme is better that those of ARQ schemes purely using QPSK modulation or purely using BPSK modulation for transmissions. Furthermore, the proposed scheme does not require any operation of error correction as usually required in hybrid ARQ schemes. Therefore, the ARQ scheme proposed in this paper can be easily implemented     

A MULTIAXIAL FATIGUE DAMAGE MODEL FOR ORTHOTROPIC MATERIALS UNDER PROPORTIONAL LOADING

A new multiaxial fatigue damage model for orthotropic materials is proposed based on the strain vector. Six material constants are included in the model. These material constants represent the dependence of fatigue resistance on material orientation, and they can be obtained by conducting strain-controlled uniaxial fatigue tests along the three principal orthotropic directions of an orthotropic material. The model can also be transformed in new coordinate systems to predict the fatigue lives of new material orientations. Biaxial low-cycle fatigue tests are conducted to verify the model. The prediction of the model agrees with the experimental results reasonably well.     

Study and design of step-index channel waveguide bends withlarge-angle and low-loss characteristics

By using micro-prisms, improved three-dimensional (3-D) bends of the embedded and buried waveguides of step-index profile are proposed. A simple phase compensation rule for the optimal design of the micro-prism is also presented. Through the simulation of 3-D semivectorial finite-difference beam propagation method, the transmission characteristics of the improved bends are shown to have been enhanced dramatically as compared with those of the conventional ones. Even for a bend angle of as large as 10°, the normalized transmitted power can still be greater than 95%. These results of 3-D bends are then compared with those of the two-dimensional (2-D) ones which are simplified from 3-D structures by the effective index method, and physical explanation of the discrepancy between the 3-D and 2-D results is introduced. The influences of waveguide structures and prism parameters on the transmission characteristics are discussed in detail. Some criteria for the design of large-angle low-loss 3-D improved bends are also accessed     

β″－Al_2O_3陶瓷的强化和韧化

研究了稳定ＺｒＯ＿２和部份稳定ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的强化和韧化作用，观察了不同种类、不同含量的ＺｒＯ＿２对β″－Ａｌ＿２Ｏ＿３陶瓷的显微结构、力学性能和电导率的影响，探讨了β″－Ａｌ＿２Ｏ＿３的韧化机理。     

Determination of the width of the transition layer between the crystalline and amorphous zones in nylon 1010 by SAXS

The width of the transition layer between the crystalline and amorphous zones in nylon 1010 was determined by SAXS with point collimation and long-slit collimation, respectively. The width of the transition layer, E, was found to be 1.7 nm. The results show that the width of the transition layer is independent of crystallinity.