聚碳硅烷的分子量分布与可纺性研究

阐述了聚碳烷的合成及其分子量分布，讨论了高低分子含量对聚碳硅烷熔点及可纺性的影响，而且提出了分子量分布的控制标准与方法。     

具有PDEB LB膜的声表面波湿度传感器

介绍一种新型聚炔离子导体湿敏材料－聚对二炔苯的Ｌａｎｇｍｕｉｒ－Ｂｏｌｄｇｅｔｔ成膜原理与制备，淀积有１０层ＰＤＥＢ ＬＢ膜层的声表面波延迟线型湿度传感器的特性。由于ＬＢ成膜技术拉制的膜可以在分子水平上进行定量控制，保证了膜的均匀性和一致性。     

Evaluation of Qbd for electrons tunneling fromthe Si/SiO2 interface compared to electron tunneling from thepoly-Si/SiO2 interface

Electrical time-to-breakdown (TTB) measurements have shown the charge to breakdown Q_bd of gate oxide capacitors fabricated on n-type well (n-well) substrates always to be higher than that of capacitors on p-type well (p-well) substrates on the same wafer when both are biased into accumulation under normal test conditions. Here the authors correlate the higher n-well Q_bd to smooth capacitor oxide/substrate interfaces and minimized grain boundary cusps at the poly-Si gate/oxide interfaces, confirming that Fowler-Nordheim tunneling is the dominant current conduction mechanisms through the oxide. They correlate higher Q_bd to higher barrier height for a given substrate type and observe that the slope of the barrier height versus temperature plot is lower for both p-well and n-well cases with electrons tunneling from the silicon substrate. This is attributed to surface roughness at the poly-Si gate/SiO₂ interface. A poly-Si gate deposition and annealing process with clean, smooth oxide/substrate interfaces will improve the p-well breakdown characteristics and allow higher Q_bd to be achieved     

提高大直径井眼机械钻速的几项措施

随着我国西部地区石油勘探开发的进展，5000－7000m的深探井所钻数量不断增多，套管程序增加，特别是大尺寸井眼所钻深度明显加大。由于国产大尺寸钻头结构单一、型号少，破岩机械能量和水力能量不足，在易斜井段目前尚无可靠的防斜保直措施，以及钻井液性能不适宜等原因，大尺寸井眼的钻这远远低于215．9mm井眼的钻速。据此，提出了几项可以提高大尺寸井眼钻速的措施：增加大尺寸钻头的种类，采用阶梯式扩眼钻头，强化钻井参数和水力参数，选用中速动力钻具，改善钻井液性能以及采用冲击旋转钻具等。     

几何位相非线性变化的实验研究

本文报道了Pancharatnam位相非线性变化的实验研究，实验结果与理论预言符合得很好。Pancharatnam位相的这种非线性可能在光开关中得到应用。     

一种独立于被管系统的网络性能管理系统

本文提出了一种在广播信道上基于倾听机制的独立网络性能管理系统。这种系统适用于用物理广播信道连接，但存在多种协议体系结构的网络系统，例如ＣＩＭＳ网络。     

实现多层混合刻蚀薄膜大面积均匀的方法浅探

采用多层光刻工艺结合氩离子铣的混合刻蚀方法，刻蚀高Ｔｃ超导ＹＢａＣｕＯ／ＺｒＯ２（１００）薄膜图形，取得了较好的结果。在进行氩离子镜的工艺步骤中，使用普通氩离子铣设备（离子束斑极不均匀），但采取了一定的措施─－使被刻样品在刻蚀台座上可移动，模糊地实现了薄膜的相对＂大面积＂（直径φ≥２０ｍｍ）均匀刻蚀─－可同时刻蚀２～３片６ｍｍ×１０ｍｍ薄膜，并且被刻蚀部分表面起伏约在１０ｎｍ左右。图形样品的最小线条达２μｍ，其Ｔｃ、Ｊｃ人与刻蚀前薄膜的Ｔｃ、Ｊｃ相当，即：ＴＣ为８５～９０Ｋ，Ｊｃ～１０６Ａ／ｃｍ２（在７７Ｋ下）。     

The feature-based posterior crown design in a dental CAD/CAM system

This paper presents a newly developed CAD approach for a quick and accurate design of a dental posterior prosthesis. The approach arises from the basic idea that every human tooth has its own specific features. Based upon the features of the standard posterior tooth, the initial data containing the defined feature points are firstly acquired from the scanned points of the standard tooth. The standard prosthetic profile is thereby formulated using the bicubic Nurbs surface fitting technique. This profile has the two functions of possessing the same features with the patient’s missing posterior tooth, and the adjustability with the feature points and the defined B-spline profile feature curves. For the purpose of the adjustment of the established model, the global and occlusal feature curves are proposed considering the individual patient’s original information. According to these curves, the corresponding standard prosthetic profile is locally adjusted to meet the fit of the global size and occlusal surface. Finally, a close and continuous profile of a posterior crown is generated. Using this design, a posterior prosthesis is successfully manufactured in the computer-aided machining process.     

第三只眼看进品保健品

许多国家大多没有严格意义上的保健品概念，美国等国家将其统称为“功能食品”。我国应用“保健品”一词，旨在将其与药品和食品两大门类区分开来。美国的“保健品”发展速度和规模比较大，同时由于其先进的制造和科研技术，引领着世界功能食品的潮流。随着我国社会的发展，保健品的生产和研发也逐步赶上国际的步伐，而大量的进口保健品也已经进入寻常百姓家。     

新型引爆系统的数据处理研究

文中介绍了新型引爆系统的结构和起爆原理,利用计算机进行了数据处理.结果表明该引爆系统安全并且可靠,能够满足有关弹药总体的各项技术指标要求.该系统对推进钝感弹药引爆技术,特别是高新技术弹药的发展有重要意义.随着信息技术的发展,它将成为最先进的引爆系统.