Effects of LiAl-layered double hydroxides on early hydration of calcium sulphoaluminate cement paste

As a 3D micro-nano material, layered double hydroxides have been widely used in many fields, especially for reinforced composite materials. In this paper, LiAl-LDHs was obtained by a hydrothermal method. In order to investigate the effects of LiAl-LDHs on the early hydration of calcium sulphoaluminate (CSA) cement paste, compressive strength, setting time and hydration heat were tested while X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scaning electron microscopy (SEM) and differential scanning calorimetry (DSC) analysis were employed. The results indicated that LiAl-LDHs could significantly improve the early compressive strength and shorten the setting time of calcium sulphoaluminate cement paste with 3wt% concentration. Besides, the hydration exothermic rate within 5 h was accelerated with increasing LiAl-LDHs content. Moreover, the addition of LiAl-LDHs did not result in the formation of a new phase, but increased the quantity of hydration products providing higher compressive strength, shorter setting time and denser microstructure.     

鱼道水沙特性的数值模拟

鱼道是一种重要的生态补偿工程,以往研究的重点主要集中在水力学要素对鱼类通过效果及鱼类适应度的影响方面。针对泥沙在池室中可能造成的水流含沙量增高及淤积面积扩大进而影响过鱼效率和鱼道运行寿命这一关键问题,通过数值模拟方法,对不同泥沙粒径和来流流量组合情况下的池室水流含沙量变化及池底泥沙淤积分布进行了模拟计算,并在此基础上给出了解决上述问题的途径。可为在具有一定含沙特征的河流上建设更为长效的鱼道设施提供数据支撑。     

ECC/钢筋混凝土叠合梁正截面受弯承载力试验与理论研究

为了探究ECC/高强钢筋混凝土叠合梁的正截面受弯特征,以及ECC层厚度对叠合梁整体受弯性能的影响,做了两组共5根梁试件的正截面受弯试验。发现与高强钢筋混凝土梁相比,叠合梁的承载力更高,相同荷载下的挠度值和最大裂缝宽度较小。在受弯全过程中其截面应变仍符合平截面假定,钢筋与ECC也可以实现协调变形,说明受拉区使用ECC可以使得高强钢筋的应力得到充分发挥。但ECC层厚度过大可能会使叠合梁发生脆性破坏。进一步地,在此研究的基础上,对已有ECC的本构模型进行简化,忽略其应力强化贡献,并运用叠加原理,提出一种用于计算ECC/钢筋混凝土叠合梁正截面受弯承载力的方法,将计算结果与试验结果及诸多文献结果进行比较,发现吻合度较高。     

基于WRF的城市热岛效应高分辨率评估方法

为解决城市总规尺度气候评估工具缺乏的问题,分析了不同气候评估方法的特点和应用范围,研究了气象学工具WRF在城市热岛效应评估中的应用方法及有效性。建立了针对城市总规尺度的高精度城市规划信息数据库、气象数据库生成WRF模拟边界的方法;明确了高精度城市热岛效应模拟所需的WRF物理方案。以沿海城市大连夏季典型晴朗高温天气为例,利用WRF模型进行了300 m的高分辨率模拟。结果表明,WRF可以较好地模拟出城市热岛效应的强度和时空变化;将模拟结果与气象站和现场观测值进行了对比,两者变化趋势一致,偏差在可接受的范围之内。     

黄河流域三门峡水文测区泥沙密度试验分析

黄河流域三门峡水文测区地处黄河中下游,测区所辖水文站分布在晋、陕、甘、豫区间,是黄河流域多沙、粗沙区,也是治理黄河泥沙的重点区域。多年来,测区各水文站大多采用置换法推求泥沙水样的沙重,泥沙密度值均取经验值2.70 g/cm~3。为了验证这一数值的准确性,在1990~1995年试验的基础上,于2007年和2013年,在本测区黄河干流和重要支流的12个水文站和库区取样,进行密度试验。通过统计分析,求出本测区黄河干流各站的泥沙密度值为2.71g/cm~3、支流各站的泥沙密度为2.73g/cm~3。     

基于“火积”的喷淋室内气-水热湿交换性能分析

为研究空气饱和程度对换热效果的影响,采用数值模拟方法,计算气体沿等温线、等焓线、等含湿量线向饱和线靠近的过程中全热交换量、"火积"耗散、"火积"耗散热阻、全热交换效率的变化情况。研究发现:气体沿着这三条线逐渐向饱和线靠近时其"火积"耗散热阻始终在减小,全热交换效率在增大。     

基于正态分布原理的贝叶斯水质综合评价

将正态分布原理与贝叶斯方法相结合来进行黄壁庄水库水质综合评价,并给出了改进的贝叶斯(Bayes)方法的思路和计算方法。以GB3838-2002为评价标准,采用改进的贝叶斯方法建立贝叶斯水质评价模型,对黄壁庄水库坝上水质监测数据8项指标进行水质评价研究。评价结果表明:改进的贝叶斯综合水质评价模型适用于黄壁庄水库的水质评价,且黄壁庄水库综合水质处于Ⅰ—Ⅱ类,年内水质变化不大,丰水期水质相对较差,为Ⅱ级水质,其余月份均达到Ⅰ类水质标准。     

Adaptive fuzzy sliding mode control for coordinated longitudinal and lateral motions of multiple autonomous vehicles in a platoon

In this paper, the platoon control problem of autonomous vehicles in highway is studied. Since the autonomous vehicles have the characteristics of nonlinearities, external disturbances and strong coupling, a novel adaptive fuzzy sliding coordinated control system is constructed to supervise the longitudinal and lateral motions of autonomous vehicles, in which the fuzzy system is employed to approximate the unknown nonlinear functions. Due to the low sensitivity to disturbances and plant parameter variations, the proposed control approach is an efficient way to handle with the complex dynamic plants operating under un-certainty conditions. The asymptotic stability of adaptive coordinated platoon close-loop control system is verified based on the Lyapunov stability theory. The results indicate that the presented adaptive coordinated platoon control approach can accurately achieve the tracking performance and ensures the stability and riding comfort of autonomous vehicles in a platoon. Finally, simulation test is exploited to demonstrate the effectiveness of the proposed control approach.     

Bimodal plate structures induced by pulsed laser in duplex-phase Zr alloy

A duplex-phase Zr-2.5Nb alloy was treated by pulsed laser, followed by careful microstructural characterization using field emission gun scanning electron microscope and attached electron backscatter diffraction. Beneath the modification zones with common uniform α-plate structures(UPS), a layer of unreported bimodal α-plate structures(BPS) featured by coarse(submicron)plates forming multiple cores surrounded by dense fine(nanoscale) plates was found. Presence of such BPS is attributed to non-equilibrium thermodynamic conditions induced by the pulsed laser treatments. Limited diffusion of Nb due to the short pulse during laser heating allows β phases with distinctly different Nb contents to be presented: Nb-enriched prior β films and Nb-depleted β phases, transforming into the fine and the coarse plates during cooling, respectively. Orientation analyses show that both types of plates in the BPS are aroused essentially from a single β orientation, suggesting epitaxial growth of the Nb-depletedβ phases from the preexisting β films.     

Investigation on the cleaning of KDP ultra-precision surface polished with micro water dissolution machining principle

A potassium dihydrogen phosphate (KDP) optical crystal was machined to an ultra-precision surface with water-in-oil (W/O) micro emulsion polishing fluid. The micro water dissolution principle utilized in the machining process is discussed, its planarization mechanism is illustrated, and an ultra-precision polished surface with 2.205 nm RMS roughness is obtained. However, a substantial quantity of residual contamination remained on the polished surface after machining. This can seriously impact the optical performance of the crystal, and so it must be removed. Fourier transform infrared (FTIR) spectroscopy was used to conduct an investigation into the composition of the surface residue, and the results showed that the residue was comprised of organic chemicals with hydrocarbon chains and aromatic ether, i.e., mostly the polishing fluid. The cleaning method and the principle on which the KDP ultra precision surface investigation is based are discussed in detail, and the cleaning experiments with selected KDP-compatible organic solvents were then performed. FTIR transmittance spectra measurement and microscopic observations were employed to assess the effects of the cleaning process on the surface of the KDP crystal. The results showed that toluene cleaning achieved the most desirable results. This cleaning method produced a surface roughness of 1.826 nm RMS, which allows the KDP crystal to be applied to subsequent engineering applications.