A study on the anodic protection of Titanium evaporators in Al2(SO4)3 solution

The feasibility of the anodic protection of titanium evaporators in Al₂(SO₄)₃ solution was studied by the measurement of polarization curves, weight loss, solubility of passive film and AC impedance. The protection parameters and efficiency were determined. In addition, the practical technology of anodic protection was studied by screening reference electrodes and auxiliary cathodes. Throwing power was also measured. Four rows of tube-type evaporators of titanium have been anodically protected in situ. Field tests lasting more than one year show satisfactory results.     

Three‐dimensionally braided carbon fiber–epoxy composites,a new type of material for osteosynthesis devices. I. Mechanical properties and moisture absorption behavior

In recent years, three‐dimensionally (3D) braided composites have attracted a great deal of attention because of their high‐impact damage tolerance and fatigue life, superior fracture toughness, and so forth, and have been used in aeronautics, military, and transportation. These advantages make them strong candidates for osteosynthesis devices. In this study, 3D braided carbon fiber–epoxy (C_3D/EP) composites were produced via a simple vacuum impregnation technique. The load‐deflection curve, mechanical properties, and influence of fiber volume fraction, braiding angle, and axial reinforcing fibers were examined to determine their suitability for internal fixation devices. It is found that the C_3D/EP composites have excellent toughness and do not show brittleness when fractured because of their relatively high void content. The flexural, shear, and impact strengths of the C_3D/EP composites are excellent. It was shown that a C_3D/EP composite with a stiffness similar to load‐bearing bones can be made while maintaining enough strength. It is concluded that a relatively higher void content and braiding angle is more suitable for the C_3D/EP composites from the viewpoint of requirements of fracture fixation materials. The moisture absorption behavior and changes in mechanical properties caused by moisture uptake were evaluated. Results show that absorbed moisture slightly decreases mechanical properties of the C_3D/EP composites. Contrary to the unreinforced epoxy, the moisture absorption behavior of the C_3D/EP composites cannot be described with Fick's law of diffusion, probably because of the presence of voids and/or 3D fiber structure. The exact mechanisms should be proposed in further investigations. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1031–1039, 2002     

圆锥形零件冲压变形与成形载荷的分析

由于悬空侧壁部分的变形状态是圆锥形零件成形的关键，而径向拉应力是实现悬空部分成形的必要条件，同时也是该部分冲压成形成败的关键为此，经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式。同时分析了圆锥形零件的成形载荷。     

塑钢包装箱材料贮存寿命预测

用热老化箱对4种塑钢包装箱用材进行了为期1个月的热老化试验，以材料的冲击强度作为判据指标，通过回归处理外推得到其常温下的贮存寿命预测评估结果。     

新抗生素B-3543的研究

对新抗生素B-3543进行了系统的研究,关键指标已达到工业化生产水平。确立了产生菌的分类地位,测定了抗生素的抗菌谱,获得效价达10000μg/ml的高产菌株,阐明了B-3543的化学结构,提出3种效价检定方法,制定了产品质量标准,完善了生产工艺,使产品总收率达60％。该项目还存在产品成本过高,产品稳定性不好等问题,有待研究解决。     

Prediction of cracking within early-age concrete due to thermal, drying and creep behavior

To predict potential early-age cracking after concrete placing, a numerical simulation procedure has been completed based on a micromechanical model and empirical formulas on the property development of young concrete. The numerical model could account for the effects of hydration, moisture transport and creep. Environmental influences, such as removal of formworks, curing conditions and variations of surrounding temperature and relative humidity, have been investigated. In calculating stress field with age caused by these synthetic physical-mechanical processes, three-dimensional finite element and finite difference (3D-FE-FD) methods are combined together.     

聚氧化乙烯—聚磷酸钠共混物的钠离子导电性

研究了聚氧化乙烯-聚磷酸钠共混物的钠离子导电性和低分子量多缩乙二醇对共混物导电性的改进作用。结果表明,降低多缩乙二醇的分子量以及增加其含量都有利于提高共混物的离子导电率。增塑剂改进共混物导电性的实质是提高共混物的非晶相含量,共混物内钠离子传导发生在非晶区,聚合物链段运动是离子传导的主要推动力。     

稀土树脂相分光光度法研究

在HCl—KCl(pH0.5)介质中,稀土—三溴偶氮胂二元络合物能较好地被阴离子交换树脂吸附。RE_2O_8在0～8μg/25ml范围内符合比尔定律,以双波长等吸收点法(测量波长λ_1=650nm,参比波长λ_2=740nm)扣除树脂背景影响,应用于稀土矿中稀土总量测定,结果令人满意。     

Condom use: A self-efficacy model.

A survey of heterosexually active college students gathered information about condom use, self-efficacy (SE), outcome expectancies, sexual attitudes, peer group influences, AIDS knowledge, and a perceived vulnerability to AIDS. On the basis of A. Bandura's (1986) social-cognitive theory, a structural model with SE as the central mediator was formulated and evaluated with LISREL. This model explained 46% of the variance in condom use from judgments of SE and effects attributable to peers and 53% of the variance in SE from outcome expectancies and peer group influences. Sexual attitudes, AIDS knowledge, and perceived vulnerability did not predict condom use. Most students were well-informed about HIV transmission but reported not feeling at risk, even though many engaged in risky sexual behavior. (PsycINFO Database Record (c) 2010 APA, all rights reserved)