Two-dimensional correlation relaxometry studies of cement pastes performed using a new one-sided NMR magnet

We present preliminary results of the first NMR T₁-T₂ two-dimensional relaxation correlation experiments performed using a one-sided NMR system in cement based materials. Two-dimensional correlation relaxometry has itself only recently been demonstrated in cement paste where it proved to be a particularly sensitive probe of pore-water dynamics providing direct information on exchange of water between the gel and capillary pore networks. Further to this we have observed differences in the structural development of a selection of cement pastes throughout the early stages of hydration and verified the theoretical frequency dependence of the ratio T₁ / T₂. When coupled with instrumentation developments in one-sided NMR magnets the way is opened to detailed, spatially resolved studies of the development of hydration and porosity in the surface layers (top 50 mm) of cementitious materials. A new magnet, suitable for such applications, is discussed.     

Supported Alumina Members by an in-Situ Sol–Gel Method

Alumina membranes were prepared using a sol–gel process. Thin gel layers were grown onto porous alumina support tubes by using the permeation of water through the tube to control the rate of hydrolysis. Optimum coating conditions were found to be an ASB to 2-propanol volume ratio of 1:25, coating times between 10 and 15 s, and partial drying times between 2.5 and 3 min, depending on whether the water was flowing in the tube or stored in the tube. The coatings remained crack-free and adherent when fired to 800°C.     

Mineralogy of ash of some American coals: variations with temperature and source

Ten samples of mineral-matter residue were obtained by the radio-frequency low-temperature ashing of subbituminous and bituminous coals. The low-temperature ash samples were then heated progressively from 400 °C to 1400 °C at 100 °C intervals. Mineral phases present at each temperature interval were determined by X-ray diffraction analyses. The minerals originally present in the coals (quartz, kaolinite, illite, pyrite, calcite, gypsum, dolomite, and sphalerite) were all altered to higher temperature phases. Several of these phases, including kaolinite, metakaolinite, mullite, anhydrite, and anorthite, were found only in limited temperature ranges. Therefore the temperature of formation of the ashes in which they occur may be determined. Mineralogical differences were observed between coal samples from the Rocky Mountain Province, the Illinois Basin, and the Appalachians; and as a result of these mineralogical differences, different high-temperature phases resulted as the samples were heated. However, regional generalizations cannot be made until a greater number of samples have been studied.     

Lipase PS-catalyzed transesterification of citronellyl butyrate and geranyl caproate: Effect of reaction parameters

Pseudomonas sp. lipase PS was immobilized by adsorption and tested for its ability to catalyze the synthesis of citronellyl butyrate and geranyl caproate by transesterification in n-hexane. The reaction parameters investigated were: enzyme load, effect of substrate concentration, added water, temperature, time course, organic solvent, pH memory, and enzyme reuse. Yields as high as 96 and 99% were obtained for citronellyl butyrate and geranyl caproate, respectively, with 300 units (approx. 15% w/w of reactants) of lipase PS. Increasing amounts of terpene alcohol inhibited lipase activity, while excess acyl donor (triacylglycerol) concentration enhanced ester production. Optimal yields were obtained at temperatures from 30–50°C after 24-h incubation time. Yields of 90 and 99% were obtained for citronellyl and geranyl esters, respectively, with 2% added water. Solvents with log P values ≥ 2.5 showed the highest conversion yields. pH 7 and 6–8 seemed to be ideal for citronellyl butyrate and geraniol caproate, respectively. The lipase remained active after reusing 12 times.     

A biomarker of n−3 compliance in patients taking fish oil for rheumatoid arthritis

Dietary fish oil supplements have been shown to have benefits in rheumatoid arthritis (RA), other inflammatory diseases, and in cardiovascular disease. As with any medical advice, variability will exist with regard to adherence and consequent biochemical or pharmacophysiologic effects. The aim was to explore the utility of plasma phospholipid EPA as a measure of n−3 PUFA intake and response to standardized therapeutic advice given in an outpatient or office practice setting, to increase dietary n−3 PUFA, including a fish oil supplement. Patients with early RA were given verbal and written advice to alter their dietary n−3 PUFA intake, including ingestion of 20 mL of bottled fish oil on juice daily. The advice included instructions to increase n−3 PUFA and to avoid foods rich in n−6 PUFA. Every 3 mon, blood samples were obtained for analysis of plasma phospholipid FA. Plasma phospholipid EPA was used as the primary index of n−3 PUFA intake. A diverse response was seen, with about one-third of patients achieving a substantial elevation of plasma phospholipid EPA over the 12-mon study period. A third had little change, with the remainder achieving intermediate levels. Data obtained longitudinally from individual patients indicated that substantial elevations of EPA (>5% total plasma phospholipid FA) could be maintained for more than 3 yr. Plasma phospholipid EPA is a convenient measure of adherence to advice to take a dietary n−3 PUFA-rich fish oil supplement. This measure may prove a useful adjunct to intention to treat analyses in determining the effect of dietary fish oil supplements on long-term outcomes in arthritis and other chronic inflammatory diseases. It may also provide a guide to the effectiveness of therapeutic and preventive messages designed to increase n−3 PUFA intake.     

Knowledge base support for dynamic information system management

Enterprise activities are governed by regulations and laws that are multiple, heterogeneous and not always easy to understand. The arising and/or the modification of these regulations and laws can cause a significant impact in the business context, especially in terms of enterprise information systems adaptation. Currently, there are many methodological and technological tools that facilitate the application of regulations and procedures, but they are not integrated enough to ensure a complete problem management. Therefore, they are not sufficient to support organizations and companies in the management of their business processes. In this paper we propose a methodological and technological solution, able to model, manage, execute and monitor business processes of complex domains. The system allows both the design of an information system and its prototyping as a web application, by the extension of an appropriately selected Business Process Management suite. During both the design and the usage phases of the prototyped information system, it is possible to interface with a knowledge base that contains information about regulations and aspects that characterize the enterprise (organizational chart, tasks, etc.).     

Note: flowing ion population from a resonance cavity source

The experimental low energy plasma for hemispherical analyzers nominal testing thermal plasma facility of Dartmouth College uses a microwave plasma source which generates an ionosphere-like plasma through a two-step process. The plasma is initially generated inside a cylindrical, insulated, resonance cavity. This initial plasma must pass through a sheath in order to enter the main experimental region. This process imparts a significant flow velocity to the ions which has been neglected in previous analysis of this plasma source. We predict the flow energy of the ions to be between 12-15 eV depending on conservation laws and show agreement with experimental results.     

Discipline-based instruction to promote interdisciplinary design of wearable and pervasive computing products

This paper reports on a design experience for undergraduates in computer engineering, industrial design, and marketing that focuses on pervasive computing devices. Across a broad range of targeted application areas and user groups, many of the student designs have been wearable computers. Consequently, our course will be of interest to the wearable computing community, particularly in terms of our aim of bridging the gap between design and engineering. For the two most recent offerings of the course, we have utilized external observers and surveyed the students in order to validate the impact of aspects of our process and changes to it. This paper is based upon 5 years of experience and 2 years of analysis of our course, and it presents an overview of our process with both qualitative and quantitative results from these two most recent offerings.     

Generating vegetation leaf area index Earth system data record from multiple sensors. Part 2: Implementation,analysis and validation

The evaluation of a new global monthly leaf area index (LAI) data set for the period July 1981 to December 2006 derived from AVHRR Normalized Difference Vegetation Index (NDVI) data is described. The physically based algorithm is detailed in the first of the two part series. Here, the implementation, production and evaluation of the data set are described. The data set is evaluated both by direct comparisons to ground data and indirectly through inter-comparisons with similar data sets. This indirect validation showed satisfactory agreement with existing LAI products, importantly MODIS, at a range of spatial scales, and significant correlations with key climate variables in areas where temperature and precipitation limit plant growth. The data set successfully reproduced well-documented spatio-temporal trends and inter-annual variations in vegetation activity in the northern latitudes and semi-arid tropics. Comparison with plot scale field measurements over homogeneous vegetation patches indicated a 7% underestimation when all major vegetation types are taken into account. The error in mean values obtained from distributions of AVHRR LAI and high-resolution field LAI maps for different biomes is within 0.5 LAI for six out of the ten selected sites. These validation exercises though limited by the amount of field data, and thus less than comprehensive, indicated satisfactory agreement between the LAI product and field measurements. Overall, the inter-comparison with short-term LAI data sets, evaluation of long term trends with known variations in climate variables, and validation with field measurements together build confidence in the utility of this new 26 year LAI record for long term vegetation monitoring and modeling studies.