The impact of III-V semiconductors on microelectromechanicalsystems

This article examines the special features of the III-V semiconductors, such as gallium arsenide and chemically related compounds, which make them an attractive alternative to silicon-based technology in the field of microelectromechanical systems. As in conventional electronic systems, it is not expected that the III-V compounds will become exclusively used in all instances, but rather a substantial niche market-exploiting the special advantages of the compound semiconductors-is likely to be established     

Mechanisms of deformation and fracture of multilayer coatings during thermal cycling

Damage to multilayer coatings under thermal cyclic loading is investigated. The mechanisms of crack formation are established and studied as a function of the composition of the coatings, the base metal, and the form of cycle. On the basis of these results, we suggest a composition of multilayer coating with high heat resistance.Science and Production Department, Polzunov Central Design and Technological Institute, St. Petersburg. Translated from Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 29, No. 6, pp. 48–55, November–December, 1993.     

Shunting neural network photodetector arrays in analog CMOS

This paper describes a custom analog CMOS photodetector array IC that exploits nonlinear lateral inhibition to achieve dynamic range compression, edge enhancement, and adaptation to mean input intensity. The neural net array architecture, characterized by nearest-neighbor connections and multiplicative cell interaction, is modeled after biological vision systems. The fabricated IC successfully implements a portion of the compact and powerful nonlinear signal processing performed in the outer layers of the vertebrate retina. Measured results are presented for an optical input intensity range of nearly six decades. A scanning architecture that allows for preferential directional sensitivity is also demonstrated. Measured data agree well with models created using a spreadsheet program     

Smart cars, smart highways

Advanced electronics is being used to unclog the transportation network and allow private vehicles, trucks, buses and trains to move further faster. already a range of technologies and ideas have been explored, deployed, and tested as part of the Intelligent Vehicle Highway System programs in the United States and Japan, and in the Road Transport Informatics program in Europe. The authors describe how these latest electronics for automobiles and roadways herald far fewer traffic jams, greater safety, and perhaps even a decline in pollution     

Achievement of pencil-beam radiation from a TM01 modecircular waveguide source

A method employing appropriately placed parallel-metallic plates in the aperture of a TM₀₁ mode circular waveguide source so as to have it produce pencil-beam radiation is described and analyzed. Programmed computations, with experimental verification, are given for the case of a C-Band TM₀₁ source flared out to a conical horn so as to produce moderate (22 dBi) gain. Means of extending the method to achieve higher gains (40 dBi to 60 dBi) and to modify the plate arrangement so as to produce the same effect with a TE₀₁ mode are briefly outlined     

Combined statistical study of joint angles and ground reactionforces using component and multiple correspondence analysis

The purpose of this research is to propose a general methodology to draw gait patterns when including hip, knee and ankle angle excursions in the sagital plane and the three components of the ground reaction force. The multidimensional signal analysis procedure is divided into three main stages: 1) describing the six signals of each step through sliding averages computed for successive time windows, 2) analyzing separately the six step-by-window tables obtained for each signal through principal component analysis to reduce the excessive quantity of data, and 3) analyzing the most informative time windows of the six signals at the same time. To emphasize both linear and nonlinear relationships between the respective time windows, the signal range within a window is cut into fuzzy modalities such as, “low” “medium” and “large.” The resulting table is investigated using multiple correspondence analysis. The outcomes are gait patterns combining both time and space aspects. The factor planes obtained from multiple correspondence analysis constitute initial data models so that new data obtained from pathological gait can be directly projected onto them. Such an operation can be used to show how the rehabilitation of a particular subject evolves in relation to normal gait patterns     

Effects of hot carrier induced interface state generation insubmicron LDD MOSFET's

A two-dimensional numerical simulation including a new interface state generation model has been developed to study the performance variation of a LDD MOSFET after a dc voltage stress. The spatial distribution of hot carrier induced interface states is calculated with a breaking silicon-hydrogen bond model. Mobility degradation and reduction of conduction charge due to interface traps are considered. A 0.6 μm LDD MOSFET was fabricated. The drain current degradation and the substrate current variation after a stress were characterized to compare the simulation. A reduction of the substrate current at V_g ≃0.5 V_d in a stressed device was observed from both the measurement and the simulation. Our study reveals that the reduction is attributed to a distance between a maximum channel electric field and generated interface states     

Dielectric measurements using a rational function model

A recently proposed rational function model for the aperture admittance of 50 ohm Teflon filled coaxial lines in contact with a homogeneous dielectric is experimentally validated. A calibration technique of the automatic network analyzer utilizing standard terminations and time domain gating is used. Uncertainties in the dielectric properties of reference liquids do not enter the calibration procedure. Experimental results for water and methanol are compared with estimated values. A model expression for the sensitivity of the probe is validated. The sensitivities of two coaxial line probes for the measurements made are determined. Results obtained using the new model are compared with those of other workers     

Tests of univariate and bivariate stochastic ageing

Concepts of ageing describe how a population of units or systems improves or deteriorates with age. Many classes of life distributions are categorized and defined in the literature according to their ageing properties. An important aspect of such classifications is that the exponential distribution is nearly always a member of each class. The notion of stochastic ageing is important in any reliability analysis, and many test statistics have been developed for testing exponentiality against various ageing alternatives. This paper is an overview of these developments. The author begins with a table of ageing classes together with key references, followed by a brief discussion on the characterization of exponentiality. Test procedures are summarized, and followed by the main review. Tests of exponentiality against other alternatives are explained for randomly censored data. Finally, tests of multivariate ageing properties are listed. Some of the life classes have been derived more recently and, as far as is known, no test statistics have been proposed. On the other hand, several tests are available for some classes. Relative efficiency of a test is discussed whenever appropriate