Relation of swelling and Tg depression to the apparent free volume of a particle‐filled,epoxy‐based adhesive

The effect of hygrothermal aging on a particle‐filled, epoxy‐based adhesive was studied using a gravimetric sorption technique. This study has explored moisture sorption characteristics as well as the associated behaviors of swelling and the depression of the glass transition temperature (T_g). We observed that the diffusion of water in this adhesive has a non‐Fickian behavior, and the depression of T_g proceeds to a definite value that is independent of the final equilibrium water content of the system. Our observations suggest that water diffuses into the polymer in a dual‐sorption mode, in which water resides in two populations. In one population, water is considered to occupy apparent free volume of the adhesive, and the second population water infiltrates polymer structure and forms hydrogen‐bonded clusters. Our results show that hygrothermal aging temperature and swelling do not alter the apparent free volume of this adhesive. We conclude that the constant value of T_g depression at saturation implies that only water in the apparent free volume is responsible for the T_g depression, whereas the swelling proceeds through the formation of hydrogen bonds in the adhesive. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1436–1444, 2003     

A novel attractant for Mexican fruit fly,Anastrepha ludens,from fermented host fruit

Chemicals from fermented chapote fruit were identified and evaluated as attractants for hungry adult Mexican fruit flies in laboratory and greenhouse bioassays. Twenty-eight chemicals identified from an attractive gas-chromatography fraction were as attractive as a chapote volatiles extract (CV) when mixed in the same amounts found in CV. Sixteen of the chemicals were slightly attractive to flies when tested individually. A mixture containing 15 of the chemicals by design and the 16th as an impurity, in arbitrary concentrations, was at least as attractive as the original CV. In a series of experiments, the number of chemicals was reduced to three by elimination of unnecessary components. The three-component mixture retained the attractiveness of the 15-component mixture. The three chemicals were 1,8-cineole, ethyl hexanoate, and hexanol (CEH). Attractiveness of the three-chemical mixture was equal to the sum of the attractiveness of the three individual components, suggesting that each chemical binds to a different receptor type that independently elicits partial attraction behavior. Optimal ratios were 1011 of the three chemicals, respectively. Optimal test quantities ranged between 0.4–4g of 1,8-cineole and 40–400 ng each of ethyl hexanoate and hexanol applied to filter paper in the laboratory bioassays. A neat 1011 mixture of the chemicals was 1.8 times more attractive than aqueous solutions ofTorula dried yeast and borax to starved 2-day-old flies when the lures were tested in competing McPhail traps in a large greenhouse cage.Diptera: Tephritidae.     

Carbon nanotube supported ruthenium catalysts for the treatment of high strength wastewater with aniline using wet air oxidation

Multi-walled carbon nanotubes (MWCNT) can be efficiently used as support of ruthenium catalysts for the catalytic wet air oxidation of high strength wastewater containing aniline. Catalysts were prepared using different ruthenium precursors, Ruthenocene [Ru(η⁵-C₅H₅)₂], Ruthenium (1,5-cyclooctadiene, 1,3,5-cyclooctatriene) [Ru(cod)(cot)] and Ruthenium trichloride (RuCl₃ · xH₂O), different impregnation methods (excess solution and incipient wetness impregnation) and different MWCNT support surface chemistry (nitric acid oxidized MWCNT-COOH and Na₂CO₃ ion exchanged MWCNT-COONa). The efficiency of the aniline removal obtained with the catalysts prepared with different precursors decreases in the order [Ru(cod)(cot)] > RuCl₃ · xH₂O > [Ru(η⁵-C₅H₅)₂], 100% aniline conversion being obtained after 45 min of reaction with the catalyst prepared with [Ru(cod)(cot)]. The influence of the impregnation technique was found to be negligible, while the use of the MWCNT-COONa support led to increased catalyst performances when compared to that obtained with catalysts prepared with the MWCNT-COOH support. Leaching of ruthenium was observed in all cases, but the use of the precursor [Ru(cod)(cot)] and of the support MWCNT-COONa in the preparation of the catalysts seems to improve their stability. A direct relationship between metal load and catalyst stability was found and attributed to the strength of metal-support interactions.     

CO2‐assisted polymer processing: A new alternative for intractable polymers

CO₂‐assisted polymer processing is proposed as an alternative route for intractable and high molecular weight polymers based on the plasticization effects of CO₂ and its direct effect on the melting behavior of semicrystalline polymers. A modified processing system was used to process a variety of polymers in the presence of high‐pressure CO₂. The system includes an extruder that was modified to allow for high pressures created by the injection of CO₂. The new design includes a modified feed section that allows a given mass of polymer to interact with CO₂ before and during the extrusion process. The inherent shear mixing and the presence of CO₂ allow for a specific control over the extrudate morphology. Results suggest that this alternative design provides a new and easy route to melt process high melt viscosity polymers of commercial importance, such as polytetrafluoroethylene (PTFE), fluorinated ethylene propylene copolymer (FEP), and syndiotactic polystyrene (s‐PS). The increased processability of these systems in CO₂ is related to the plasticization effect of CO₂ that was quantified through a depression in the glass‐transition temperature according to the Chow model. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1501–1511, 2004     

The effect of adding devulcanized rubber on the thermomechanical properties of recycled polypropylene

This work aims to investigate the effect of adding vulcanized or partially devulcanized rubbers on recycled polypropylene (PPr), considering thermomechanical and morphological properties. The study proposes to better understand how structural changes underwent by rubber (after the devulcanization) contributed to improving the mechanical properties of the PPr. The PPr/rubber blends were prepared by a co-rotating twin-screw extruder and then were injected. The blends composed of the most devulcanized rubbers by microwaves with refined microstructure showed higher values of elongation at break and toughness. Data showed that the devulcanization process applied to the rubber interfered positively in its adhesion to the PPr. Data from dynamic mechanical analysis and atomic force microscopy indicated that the most devulcanized rubbers presented an interface more connected to PPr. These chemical interactions possibly impacted the mechanical properties of the PPr. Moreover, dilatation processes favored the fracture mechanisms of the PPr when rubber was added to it.     

The Nyquist stability criterion in the Nichols chart

The Nyquist stability criterion is a widely used technique for determining in the complex s‐plane the stability of a dynamical system with feedback. This paper presents a practical and comprehensive method to compute the Nyquist stability criterion directly in the Nichols (magnitude/phase) chart. The proposed method also gives guidelines to design controllers to stabilize unstable plants when dealing with frequency domain techniques like the quantitative feedback theory robust control. Copyright © 2015 John Wiley & Sons, Ltd.     

Visual search tree profiling

Understanding how the search space is explored for a given constraint problem – and how it changes for different models, solvers or search strategies – is crucial for efficient solving. Yet programmers often have to rely on the crude aggregate measures of the search that are provided by solvers, or on visualisation tools that can show the search tree, but do not offer sophisticated ways to navigate and analyse it, particularly for large trees. We present an architecture for profiling a constraint programming search that is based on a lightweight instrumentation of the solver. The architecture combines a visualisation of the search tree with various tools for convenient navigation and analysis of the search. These include identifying repeated subtrees, high-level abstraction and navigation of the tree, and the comparison of two search trees. The resulting system is akin to a traditional program profiler, which helps the user to focus on the parts of the execution where an improvement to their program would have the greatest effect.     

Bed morphology, flow structure, and sediment transport at the outlet of Lake Huron and in the upper St. Clair River

An integrated multibeam echo sounder and acoustic Doppler current profiler field survey was conducted in July 2008 to investigate the morphodynamics of the St. Clair River at the outlet of Lake Huron. The principal morphological features of the upper St. Clair River included flow-transverse bedforms that appear weakly mobile, erosive bedforms in cohesive muds, thin non-cohesive veneers of weakly mobile sediment that cover an underlying cohesive (till or glacio-lacustrine) surface, and vegetation that covers the bed. The flow was characterized by acceleration as the banks constrict from Lake Huron into the St. Clair River, an approximately 1500-m long region of flow separation downstream from the Blue Water Bridge, and secondary flow connected to: i) channel curvature; ii) forcing of the flow by local bed topography, and iii) flow wakes in the lee side of ship wrecks. Nearshore, sand-sized, sediment from Lake Huron was capable of being transported into, and principally along, the banks of the upper St. Clair River by the measured flow. A comparison of bathymetric surveys conducted in 2007 and 2008 identifies that the gravel bed does undergo slow downstream movement, but that this movement does not appear to be generated by the mean flow, and could possibly be caused by ship-propeller-induced turbulence. The study results suggest that the measured mean flow and dredging within the channel have not produced major scour of the upper St. Clair River and that the recent fall in the level of Lake Huron is unlikely to have been caused by these mechanisms.     

A novel electromyographic signal simulator for muscle contraction studies

Mathematical simulation has been widely used in biomedical and biological sciences. In the case of the surface electromyographic (SEMG) activity, some models have been proposed aiming to study muscle contraction strategies that are used during different tasks and conditions. Most of SEMG simulators are based on energy modulation of a Gaussian noise. This work proposes a novel simulator in which the user-defined parameters are associated with the motor units (MUs) recruitment and their firing rate. Comparison between the mean spectrum of real SEMG signals collected in isometric contraction of the muscle biceps brachii and the mean spectrum obtained from simulated SEMG signals showed a good agreement, pointing the proposed simulator seems to be capable to generate consistent electromyographic signals in time and frequency domains and that can be used in many studies, in particular in the evaluation of automatic methods aimed to detect muscular contraction.