A new test cell for the evaluation of thermo-physical performance of facades building components

How do the new building façade components work under real climatic conditions? The question is especially related to the dynamic behaviour of new and complex components such as the ventilated walls, the Phase Change Material, or others that use nano-technologies and aerogels. One of the objectives of the undergoing research activity, named Abitare Mediterraneo, is the evaluation of their thermal behaviour through the use of an outdoor test cell, in order to reproduce under the real external conditions the performance of these components, and consequently define the main thermal parameters such as the attenuation factor and the thermal inertia, characterising the component; moreover, the results will be used to write new algorithms for dynamic simulation tools allowing an appropriate evaluation of the complex behaviour of the whole building at a real scale condition. The new test cell is realised in Florence, Italy. The design starts from the study of the experience of the existing PASSYS test cells, overtaking the main weakness of the building structure and of the heat-flux sensors.     

Computational intelligence modelling of pharmaceutical tabletting processes using bio-inspired optimization algorithms

In pharmaceutical development, it is very useful to exploit the knowledge of the causal relationship between product quality and critical material attributes (CMA) in developing new formulations and products, and optimizing manufacturing processes. With the big data captured in the pharmaceutical industry, computational intelligence (CI) models could potentially be used to identify critical quality attributes (CQA), CMA and critical process parameters (CPP). The objective of this study was to develop computational intelligence models for pharmaceutical tabletting processes, for which bio-inspired feature selection algorithms were developed and implemented for optimisation while artificial neural network (ANN) was employed to predict the tablet characteristics such as porosity and tensile strength. Various pharmaceutical excipients (MCC PH 101, MCC PH 102, MCC DG, Mannitol Pearlitol 200SD, Lactose, and binary mixtures) were considered. Granules were also produced with dry granulation using roll compaction. The feed powders and granules were then compressed at various compression pressures to produce tablets with different porosities, and the corresponding tensile strengths were measured. For the CI modelling, the efficiency of seven bio-inspired optimization algorithms were explored: grey wolf optimization (GWO), bat optimization (BAT), cuckoo search (CS), flower pollination algorithm (FPA), genetic algorithm (GA), particle swarm optimization (PSO), and social spider optimization (SSO). Two-thirds of the experimental dataset was randomly chosen as the training set, and the remaining was used to validate the model prediction. The model efficiency was evaluated in terms of the average reduction (representing the fraction of selected input variables) and the mean square error (MSE). It was found that the CI models can well predict the tablet characteristics (i.e. porosity and tensile strength). It was also shown that the GWO algorithm was the most accurate in predicting porosity. While the most accurate prediction for the tensile strength was achieved using the SSO algorithm. In terms of the average reduction, the GA algorithm resulted in the highest reduction of inputs (i.e. 60%) for predicting both the porosity and the tensile strength.     

Modular and Versatile Spatial Functionalization of Tissue Engineering Scaffolds through Fiber‐Initiated Controlled Radical Polymerization

Native tissues are typically heterogeneous and hierarchically organized, and generating scaffolds that can mimic these properties is critical for tissue engineering applications. By uniquely combining controlled radical polymerization (CRP), end‐functionalization of polymers, and advanced electrospinning techniques, a modular and versatile approach is introduced to generate scaffolds with spatially organized functionality. Poly‐ε‐caprolactone is end functionalized with either a polymerization‐initiating group or a cell‐binding peptide motif cyclic Arg‐Gly‐Asp‐Ser (cRGDS), and are each sequentially electrospun to produce zonally discrete bilayers within a continuous fiber scaffold. The polymerization‐initiating group is then used to graft an antifouling polymer bottlebrush based on poly(ethylene glycol) from the fiber surface using CRP exclusively within one bilayer of the scaffold. The ability to include additional multifunctionality during CRP is showcased by integrating a biotinylated monomer unit into the polymerization step allowing postmodification of the scaffold with streptavidin‐coupled moieties. These combined processing techniques result in an effective bilayered and dual‐functionality scaffold with a cell‐adhesive surface and an opposing antifouling non‐cell‐adhesive surface in zonally specific regions across the thickness of the scaffold, demonstrated through fluorescent labelling and cell adhesion studies. This modular and versatile approach combines strategies to produce scaffolds with tailorable properties for many applications in tissue engineering and regenerative medicine.     

Evaluating vector data type usage in OpenCL kernels

Open Computing Language (OpenCL) is an open, functionally portable programming model for a large range of highly parallel processors. To provide users with access to the underlying platforms, OpenCL has explicit support for features such as local memory and vector data types (VDTs). However, these are often low‐level, hardware‐specific features, which can be detrimental to performance on different platforms. In this paper, we focus on VDTs and investigate their usage in a systematic way. First, we propose two different approaches (inter‐vdt and intra‐vdt) to use VDTs in OpenCL kernels, and show how to translate scalar OpenCL kernels to vectorized ones. After obtaining vectorized code, we evaluate the performance effects of using VDTs with two types of benchmarks: micro‐benchmarks and macro‐benchmarks. With micro‐benchmarks, we study the execution model of VDTs and the role of the compiler‐aided vectorizer on five devices. With macro‐benchmarks, we explore the changes of memory access patterns before and after using VDTs, and the resulting performance impact. Not only our evaluation provides insights into how OpenCL's VDTs are mapped on different processors, but it also indicates that using such data types introduces changes in both computation and memory accesses. Based on the lessons learned, we discuss how to deal with performance portability in the presence of VDTs. Copyright © 2014 John Wiley & Sons, Ltd.     

trans Fatty Acids in Colostrum,Mature Milk and Diet of Lactating Adolescents

The purpose of this study was to investigate the trans fatty acids (TFA) content and distribution in colostrum, mature milk, and diet of adolescent mothers, after TFA declaration in food labels became mandatory in Brazil. Participants were healthy adolescents (n 54, 15–19 years, 1–90 days postpartum) practicing exclusive breastfeeding. Milk samples were collected 3 days after delivery (colostrum) and in the third month postpartum (mature milk) by hand expression. The fatty acid composition of the milk samples was determined by gas chromatography. TFA intake corresponded to 1.23 % of total energy value. Total 18:2 TFA accounted for less than 0.5 % of the energy intake. The amount of total 18:1 TFA (mean ± SEM) was 1.9 % ± 0.14 in colostrum and 1.5 % ± 0.2 in mature milk. The total content of n‐3 PUFA was inversely correlated with the total content of 18:1 TFA in colostrum. Both in colostrum and in mature milk, vaccenic acid (11t‐18:1) was found to be the most abundant 18:1 trans isomer, followed by elaidic acid (9t‐18:1), whereas rumenic acid (9c,11t‐18:2 CLA) was the predominant 18:2 trans isomer. In conclusion, the levels of TFA of industrial sources found in the mother's diet and breast milk (colostrum and mature milk) showed a decrease in relation to those observed in studies conducted prior to the TFA labeling resolution in Brazil. However, the current low intake levels of n‐3 LCPUFA and DHA content in the milk of lactating adolescents may be insufficient for supporting adequate neurological development of the infants.     

The morphological properties of PP coextruded tape fabrics

In the field of self‐reinforced composites many researchers have focused their attention on the coextruded tapes composed of polypropylene core and PP/PE copolymer skin. Two similar commercial fabrics (P and T) have been compared in respect of their peel resistance. For both materials, peel resistance has a periodic trend that regularly follows fabric weave style. T has demonstrated an average peel resistance and a well‐bonded area slightly greater than P. Skin/core interfacial properties have been investigated and a crosscheck between differential scanning calorimetry (DSC) and Raman spectroscopy has been adopted to understand the influence of skin structure on consolidated laminate. DSC curves exhibit three melting peaks during first heating for both fabrics, corresponding to copolymer, skin/core interface, and core melting. After consolidation at 140°C stretching‐induced superstructure and PP crystallinity degree are preserved. The presence of PP/PE copolymer + PE blend only in fabric P has been pointed out and PE content has been calculated. POLYM. ENG. SCI., 56:727–734, 2016. © 2016 Society of Plastics Engineers     

The Casein Kinase 2‐Dependent Phosphorylation of NS5A Domain 3 from Hepatitis C Virus Followed by Time‐Resolved NMR Spectroscopy

Hepatitis C virus (HCV) chronically affects millions of individuals worldwide. The HCV nonstructural protein 5A (NS5A) plays a critical role in the viral assembly pathway. Domain 3 (D3) of NS5A is an unstructured polypeptide responsible for the interaction with the core particle assembly structure. Casein kinase 2 (CK2) phosphorylates NS5A‐D3 at multiple sites that have mostly been predicted and only observed indirectly. In order to identify the CK2‐dependent phosphorylation sites, we monitored the reaction between NS5A‐D3 and CK2 in vitro by time‐resolved NMR. We unambiguously identified four serine residues as substrates of CK2. The apparent rate constant for each site was determined from the reaction curves. Ser408 was quickly phosphorylated, whereas the three other serine residues reacted more slowly. These results provide a starting point from which to elucidate the role of phosphorylation in the mechanisms of viral assembly—and in the modulation of the viral activity—at the molecular level.     

Stage-Related Defense Response Induction in Tomato Plants by Nesidiocoris tenuis

The beneficial effects of direct predation by zoophytophagous biological control agents (BCAs), such as the mirid bug Nesidiocoris tenuis, are well-known. However, the benefits of zoophytophagous BCAs’ relation with host plants, via induction of plant defensive responses, have not been investigated until recently. To date, only the females of certain zoophytophagous BCAs have been demonstrated to induce defensive plant responses in tomato plants. The aim of this work was to determine whether nymphs, adult females, and adult males of N. tenuis are able to induce defense responses in tomato plants. Compared to undamaged tomato plants (i.e., not exposed to the mirid), plants on which young or mature nymphs, or adult males or females of N. tenuis fed and developed were less attractive to the whitefly Bemisia tabaci, but were more attractive to the parasitoid Encarsia formosa. Female-exposed plants were more repellent to B. tabaci and more attractive to E. formosa than were male-exposed plants. When comparing young- and mature-nymph-exposed plants, the same level of repellence was obtained for B. tabaci, but mature-nymph-exposed plants were more attractive to E. formosa. The repellent effect is attributed to the signaling pathway of abscisic acid, which is upregulated in N. tenuis-exposed plants, whereas the parasitoid attraction was attributed to the activation of the jasmonic acid signaling pathway. Our results demonstrate that all motile stages of N. tenuis can trigger defensive responses in tomato plants, although these responses may be slightly different depending on the stage considered.     

Co-Expression and Co-Localization of Cartilage Glycoproteins CHI3L1 and Lubricin in Osteoarthritic Cartilage: Morphological,Immunohistochemical and Gene Expression Profiles

Osteoarthritis is the most common human arthritis characterized by degeneration of articular cartilage. Several studies reported that levels of human cartilage glycoprotein chitinase 3-like-1 (CHI3L1) are known as a potential marker for the activation of chondrocytes and the progression of Osteoarthritis (OA), whereas lubricin appears to be chondroprotective. The aim of this study was to investigate the co-expression and co-localization of CHI3L1 and lubricin in normal and osteoarthritic rat articular cartilage to correlate their modified expression to a specific grade of OA. Samples of normal and osteoarthritic rat articular cartilage were analyzed by the Kellgren–Lawrence OA severity scores, the Kraus’ modified Mankin score and the Histopathology Osteoarthritis Research Society International (OARSI) system for histomorphometric evaluations, and through CHI3L1 and lubricin gene expression, immunohistochemistry and double immuno-staining analysis. The immunoexpression and the mRNA levels of lubricin increased in normal cartilage and decreased in OA cartilage (normal vs. OA, p < 0.01). By contrast, the immunoexpression and the mRNA levels of CHI3L1 increased in OA cartilage and decreased in normal cartilage (normal vs. OA, p < 0.01). Our findings are consistent with reports suggesting that these two glycoproteins are functionally associated with the development of OA and in particular with grade 2/3 of OA, suggesting that in the future they could be helpful to stage the severity and progression of the disease.     

Blood Thiol Redox State in Chronic Kidney Disease

Thiols (sulfhydryl groups) are effective antioxidants that can preserve the correct structure of proteins, and can protect cells and tissues from damage induced by oxidative stress. Abnormal levels of thiols have been measured in the blood of patients with moderate-to-severe chronic kidney disease (CKD) compared to healthy subjects, as well as in end-stage renal disease (ESRD) patients on haemodialysis or peritoneal dialysis. The levels of protein thiols (a measure of the endogenous antioxidant capacity inversely related to protein oxidation) and S-thiolated proteins (mixed disulphides of protein thiols and low molecular mass thiols), and the protein thiolation index (the molar ratio of the S-thiolated proteins to free protein thiols in plasma) have been investigated in the plasma or red blood cells of CKD and ESRD patients as possible biomarkers of oxidative stress. This type of minimally invasive analysis provides valuable information on the redox status of the less-easily accessible tissues and organs, and of the whole organism. This review provides an overview of reversible modifications in protein thiols in the setting of CKD and renal replacement therapy. The evidence suggests that protein thiols, S-thiolated proteins, and the protein thiolation index are promising biomarkers of reversible oxidative stress that could be included in the routine monitoring of CKD and ESRD patients.