Removal of fulvic acid from aqueous media by adsorption onto modified vermiculite

Clay minerals are low cost materials that can be structurally modified and exploited for removal of natural organic matter from freshwaters. The present study shows that vermiculites modified by ion exchange with hexadecyltrimethylammonium or intercalation with poly(hydroxy iron) cations are potential adsorbents for removal of fulvic acid, whereas the adsorption on the raw clay mineral is negligible. The efficiency of the modified vermiculite was evaluated by measuring adsorption isotherms by the batch technique using initial fulvic acid concentrations between 2.5 and 50.0 mg L^− 1, with one hour of contact time. At least 94% of the fulvic acid initially present in a 20 mg L^− 1 solution was sorbed onto either the intercalated poly(hydroxy iron) cations or the organically modified vermiculite. Up to an initial concentration of 5.0 mg L^− 1 the adsorption is irreversible, and no quantifiable fulvic acid was measured in the desorption experiments. For initial fulvic acid concentrations between 10.0 and 50.0 mg L^− 1, desorption was between 2.3% and 4.9% for Fe(III) intercalated vermiculite, and between 1.4% and 9.2% for the organoclay. The adsorption percentages on intercalated poly(hydroxy iron) cations increased upon lowering pH and increasing the ionic strength, indicating the occurrence of strong binding mechanisms such as ligand exchange. Adsorption percentage of fulvic acid onto the organoclay also increased with lowering of pH, but in this case the adsorption percentages showed a small decrease at high ionic strength, suggesting that electrostatic attraction plays an important role in the adsorption process.     

Evaluation of the removal of n-butanol vapor by the poly(lactic acid)-zeolite-TiO2 composite and formation of by-products

The use of polymeric films incorporated with zeolite-TiO₂ composites associated with UV radiation can be an alternative in the removal of volatile organic compounds (VOCs) through the adsorption and photodegradation processes. This study produced poly(lactic acid) (PLA) films incorporated with 13× zeolite, TiO₂, and 13×-TiO₂ zeolite composite to remove n-butanol and evaluate the by-products generated in the process. The results showed that 13× zeolite and TiO₂ added individually or as a composite to PLA, gave the polymer matrix a significant increase in the removal capacity of n-butanol. The best performance was presented by the zeolite-TiO₂, composite, confirming a synergistic effect. However, the formation of CO and CO₂ exceeded the expected values, with the verification that the polymeric matrix underwent photodegradation action by TiO₂. The polymeric film only containing zeolite is the most suitable for the removal of VOCs, as it did not present degradation of the PLA, generating a lower concentration of by-products.     

A biased random‐key genetic algorithm for OSPF and DEFT routing to minimize network congestion

Interior gateway routing protocols like Open Shortest Path First (OSPF) and Distributed Exponentially Weighted Flow Splitting (DEFT) send flow through forward links toward the destination node. OSPF routes only on shortest‐weight paths, whereas DEFT sends flow on all forward links, but with an exponential penalty on longer paths. Finding suitable weights for these protocols is known as the weight setting problem (WSP). In this paper, we present a biased random‐key genetic algorithm for WSP using both protocols. The algorithm uses dynamic flow and dynamic shortest path computations. We report computational experiments that show that DEFT achieves less network congestion when compared with OSPF, while, however, yielding larger delays.     

The between-day and inter-rater reliability of a novel wireless system to analyse lumbar spine posture

Lumbar posture is commonly assessed in non-specific chronic low back pain (NSCLBP), although quantitative measures have mostly been limited to laboratory environments. The BodyGuard? is a spinal position monitoring device that can monitor posture in real time, both inside and outside the laboratory. The reliability of this wireless device was examined in 18 healthy participants during usual sitting and forward bending, two tasks that are commonly provocative in NSCLBP. Reliability was determined using intraclass correlation coefficients (ICC), the standard error of measurement (SEM), the mean difference and the minimal detectable change (MDC90). Between-day ICC values ranged from 0.84 to 0.87, with small SEM (5%), mean difference (<9%) and MDC90 (<14%) values. Inter-rater ICC values ranged from 0.91 to 0.94, with small SEM (4%), mean difference (6%) and MDC90 (9%) values. Between-day and inter-rater reliability are essential requirements for clinical utility and were excellent in this study. Further studies into the validity of this device and its application in clinical trials in occupational settings are required. STATEMENT OF RELEVANCE: A novel device that can analyse spinal posture exposure in occupational settings in a minimally invasive manner has been developed. This study established that the device has excellent between-day and inter-rater reliability in healthy pain-free subjects. Further studies in people with low back pain are planned.     

A semiotic engineering approach to user interface design

Designing software involves good perception, good reasoning, and a talent to express oneself effectively through programming and interactive languages. Semiotic theories can help HCI designers increase their power to perceive, reason and communicate. By presenting some of the results we have reached with semiotic engineering over the last few years, we suggest that the main contributions of semiotic theory in supporting HCI design are: to provide designers with new perceptions on the process and product of HCI design; to bind together all the stages of software development and use, giving them a unique homogeneous treatment; and to pose innovative questions that extend the frontiers of HCI investigations.     

Principal component analysis as a tool for studying interdependences among trace metals in edible mussels from the gulf of Trieste

Summary Principal component analysis has been applied to analyze the correlation matrix obtained from a (6 × 44) data matrix. The 6 trace metals are Co, Ni, Cu, Cd, Hg, and Pb, which are contained in the soft part of edible mussels (Mytilus galloprovincialis Lamarck) from a hatchery on the gulf of Trieste. In the space of eigenvectors, the dimensions are reduced to 3 principal axes, which account for about 77% of the total variance.The unrotated factor matrix obtained by the principal components shows that Co, Ni and Cu are bonded to the first principal component, Cd and Pb to the second, Hg to the third. This picture is also assessed by the Varimax-rotated matrix and it is tentatively explained, at least in part, by considering the associations of the trace metals from various geographical sources.

---

Hauptkomponentenanalyse für das Studium der Assoziationen unter Spurenmetallen in Miesmuscheln im Golf von Triest

Zusammenfassung Die Hauptkomponentenanalyse wurde auf die Korrelationsmatrix, die aus der (6 × 44) Datenmatrix hervorgeht, angewandt. Die 6 Spurenmetalle sind Co, Ni, Cu, Cd, Hg, Pb, die im Miesmuschelnfleisch (Mytilus galloprovineialis Lamarck) gefunden werden. Die Miesmuschelnproben stammen aus der Zucht des Golfes von Triest. In dem Eigenvektorraum werden die Dimensionen auf drei Hauptachsen reduziert, die ungefähr 77% der totalen Varianz erklären.Die unrotierte Faktorenmatrix, die aus den Hauptkomponenten hervorgeht, zeigt, daß Co, Ni, Cu an die erste Hauptkomponente, Cd und Pb an die zweite, Hg an die dritte gebunden sind. Dieses Bild wird von der Varimax-rotierten Matrix bestätigt und es findet eine Erklärung in der Herkunft der Spurenmetalle.

     

Damage Detection Utilizing the Damage Index Method to a Benchmark Structure

This paper addresses the first generation benchmark problem on structural health monitoring developed by the ASCE Task Group on Structural Health Monitoring. The focus of the problem is a four-story model of an existing physical model at the University of British Columbia where simulated data are used for the system identification. Modal parameters were extracted using the frequency domain decomposition method. Rather than relying on data from the undamaged structure, a new proposed methodology based on ratios between stiffness and mass values from the eigenvalue problem is presented to identify the undamaged state of the structure. Once the structural identification is complete, the damage index method is used to detect the location and severity of damage. By not relying on undamaged structure information, this approach may be applicable to existing structures that may already incorporate some amount of damage.     

Experimental and Numerical Analysis of Soil–Pipe Interaction

Cases of pipeline damage caused by landslides are common in coastal or mountainous regions, where a continuous monitoring/repair activity is planned in order to maintain their serviceability. The analysis of the soil–structure interaction phenomenon can be invoked to improve the planning and design of buried pipelines, to guide monitoring, and to reduce the risk of damage or failure. Two different approaches are considered in this paper: small scale laboratory tests and numerical simulations using the distinct element method (DEM). The experimental setup consists of a box filled with sand and water. Several experiments were performed, in which the diameter and the depth of the tube varied. The numerical simulations are divided in two separate series: in the first, the numerical model is calibrated and its reliability in reproducing the experimental tests is checked; in the second series, the direction of the relative displacement between the tube and the surrounding “numerical soil” varies over the range ±90° with respect to the horizontal. In the latter, both vertical and horizontal components of the drag force are measured and the corresponding interaction diagrams are constructed. The DEM simulations provide useful information about the shape of the failure mechanisms and the force transfer within the soil.     

Enzymatic synthesis of sugar esters and their potential as surface-active stabilizers of coconut milk emulsions

Sugar esters are compounds with surfactant properties (biosurfactants), i.e., capable of reducing the surface tension and promote the emulsification of immiscible liquids. On the other hand, as with all emulsions, coconut milk is not physically stable and is prone to phase separation. Therefore, the aim of this work was to evaluate the synthesis of fructose, sucrose and lactose esters from the corresponding sugars using Candida antarctica type B lipase immobilized in two different supports, namely acrylic resin and chitosan, and evaluate its application in the stabilization of coconut milk emulsions. The enzyme immobilized on chitosan showed the highest yield of lactose ester production (84.1%). Additionally, the production of fructose ester was found to be higher for the enzyme immobilized on the acrylic resin support (74.3%) as compared with the one immobilized on chitosan (70.1%). The same trend was observed for the sucrose ester, although with lower percentage yields. Sugar esters were then added to samples of fresh coconut milk and characterized according to their surface tension, emulsification index and particle size distribution. Although the microscopic analysis showed similar results for all sugar esters, results indicated lactose ester as the best biosurfactant, with a surface tension of 38.0 N/m and an emulsification index of 54.1%, when used in a ratio of 1:10 (biosurfactant:coconut milk, v/v) for 48 h experiments.     

Plant oil bioconversion into increase biological activity through lipases derived from wastes

The aim of this study was to show that abundant and inexpensive plant oils can be biotransformed to increase biological activity (antioxidant, antimicrobial and cytotoxicity) through hydrolysis reaction catalysed by lipases. We tested homemade and commercial lipases through the biotransformation of nine different plant oils in forty different combinations. First, the chemical composition of the samples was investigated. Thereafter, biological tests were conducted to assess the antioxidant and antimicrobial activity of the sampled biotransformation products, as well as analyzed their influence on the viability of healthy and cancer cells. Summarising, sunflower, corn and olive oils modified by orange waste-obtained lipases presented the most promising results, reaching up to 90% of antioxidant activity increase and significant growth inhibition of bacteria colonies belonging to genera Escherichia, Listeria, Staphylococcus, Pseudomonas and Salmonella. In addition, those compounds affected human oral squamous carcinoma cells. The bioconversion of plant oils through lipases improves their biological properties and might be an option for biotechnological application.