Hydrogen production by photoreforming of formic acid in aqueous copper/TiO2 suspensions under UV-simulated solar radiation at room temperature

A new photocatalytic system consisting of two subsystems – Cu⁰/Cl⁻/H⁺/UV_ssr and Cu^II/H⁺/TiO₂/formic acid/UV_ssr – is proposed as a tool to produce hydrogen by reforming an organic species. Formic acid is used as hole scavenger during the experimental runs. An experimental campaign is carried out to demonstrate that the systems can generate hydrogen and to assess how the generation rate depends upon experimental conditions such as copper and TiO₂ loads, chloride and proton ions, and formic acid concentrations. A strong dependence of the Cu⁰/Cl⁻/H⁺/UV_ssr subsystem reactivity upon copper load, chloride concentration and pH is observed. The investigation on the complete system, starting from zero-valent copper, indicates that the addition of TiO₂ and formic acid to the Cu⁰/Cl⁻/H⁺/UV_ssr subsystem does not result into any gain in terms of hydrogen produced and, renders the system totally unreactive under some conditions. On the other hand, when a complete system, starting from cupric ions, is adopted, hydrogen production is observed also for prolonged reaction times with a surplus of hydrogen production with respect to that generated by the Cu⁰/Cl⁻/H⁺/UV_ssr subsystem with the same Cu⁰ starting load and in absence of TiO₂ and sacrificial agent.     

Method for stakeholder identification in interorganizational environments

Stakeholders are the first emerging challenge in any software project. Their identification is a critical task for success. Nevertheless, many authors consider them as a default product of a non-explained identification process. Several aspects must be considered when the project is carried out in environments where multiple organizations interact. These complex contexts demand extremely hard efforts. Stakeholders must be identified taking into account their attributes (types, roles), which must be extended and defined for these environments. In general, there are no methodologies that allow performing this task in a systematic way for the development of interorganizational information systems. The paper proposes a method for carrying out stakeholder identification considering the diverse dimensions involved in interorganizational environments: organizational, interorganizational and external. It allows the systematic specification of all the people, groups and organizations whose interests and needs can affect or are affected by the interorganizational system. Also diverse stakeholders’ attributes such as types, roles, influence and interest are defined, analyzed, and included in the method. They are all important in later stages of any software project.     

Effects of milk high pressure homogenization on biogenic amine accumulation during ripening of ovine and bovine Italian cheeses

The aim of this work was to evaluate the biogenic amine (BA) content during the ripening of both bovine and ovine cheeses obtained using milk subjected to a homogenization treatment at 100 MPa before cheese-making. The data obtained were compared with those from cheeses produced by the same milks without any treatment or thermized. The results showed that both microbial ecology and BA concentrations of cheeses during ripening were significantly influenced by the type of milk used for cheese-making and by the treatment applied to the raw materials. In particular, the microbial counts found in Caciotta indicated that the high pressure homogenization (HPH) of milk significantly reduced the presence of the yeasts, Micrococcaceae and lactobacilli at the end of ripening. On the other hand, the HPH treatment of milk favoured the proliferation of yeasts in ovine cheese. Moreover, the ovine cheeses were characterized by a remarkably higher accumulation of BA than bovine cheeses. However, the HPH treatment of milk was able to drastically reduce the biogenic amine concentrations in both cheese typologies at the end of ripening.     

Potential Effect of CD271 on Human Mesenchymal Stromal Cell Proliferation and Differentiation

The Low-Affinity Nerve Growth Factor Receptor (LNGFR), also known as CD271, is a member of the tumor necrosis factor receptor superfamily. The CD271 cell surface marker defines a subset of multipotential mesenchymal stromal cells and may be used to isolate and enrich cells derived from bone marrow aspirate. In this study, we compare the proliferative and differentiation potentials of CD271⁺ and CD271⁻ mesenchymal stromal cells. Mesenchymal stromal cells were isolated from bone marrow aspirate and adipose tissue by plastic adherence and positive selection. The proliferation and differentiation potentials of CD271⁺ and CD271⁻ mesenchymal stromal cells were assessed by inducing osteogenic, adipogenic and chondrogenic in vitro differentiation. Compared to CD271⁺, CD271⁻ mesenchymal stromal cells showed a lower proliferation rate and a decreased ability to give rise to osteocytes, adipocytes and chondrocytes. Furthermore, we observed that CD271⁺ mesenchymal stromal cells isolated from adipose tissue displayed a higher efficiency of proliferation and trilineage differentiation compared to CD271⁺ mesenchymal stromal cells isolated from bone marrow samples, although the CD271 expression levels were comparable. In conclusion, these data show that both the presence of CD271 antigen and the source of mesenchymal stromal cells represent important factors in determining the ability of the cells to proliferate and differentiate.     

Principal component analysis for the identification of pollution sources in mussel survey by trace metals

Summary Principal component analysis has been applied to analyze the correlation matrix obtained from a 8 × 43 data matrix. The 8 trace metals are Mn, Co, Ni, Cu, Zn, Cd, Hg, Ph, which are contained in the soft part of mussels (Mytilus galloprovincialis Lamarck). Mussels were sampled from two sites in the Gulf of Trieste. In both samples, 76–78% of the total variance is explained by the four principal components. The orthogonally rotated factor matrix indicates that Co and Ni are bonded to the first principal component and Cd and Pb to the first (site 2) or second principal component (site 1). The origin of trace metals in the soft part of mussels from the Gulf of Trieste is discussed.

---

Analyse der Hauptkomponenten zur Identifizierung der Verunreinigungsursachen von Muscheln über die Spurenmetalle

Zusammenfassung Die Analyse der Hauptkomponenten wurde auf die Korrelationsmatrix, die aus der 8 × 43-Datenmatrix hervorgeht, angewandt. Diese 8 Spurenmetalle sind Mn, Co, Ni, Cu, Zn, Cd, Hg, Pb, die im Fleisch der Miesmuscheln (Mytilus galloprovincialis Lamarck) gefunden worden sind. Die Miesmuscheln stammen aus zwei Gegenden des Golfes von Triest. Vier Hauptkomponenten erklären 76–78 % der totalen Varianz der beiden Stichproben. Die orthogonale-rotierte Faktorenmatrix zeigt, daß Co und Ni an die erste Hauptkomponente und Cd und Pb an die erste (Lage 2) oder an die zweite Hauptkomponente (Lage 1) gebunden sind. Die Herkunft der Spurenmetalle im Muschelfleisch aus dem Golf von Triest wird diskutiert.

---

---

L. Felician is the author of the statistical analysis for site 1 as a part of his thesis in Commodity Science, Faculty of Economics, University of Trieste- L. Gabrielli Favretto is the author of the statistical analysis of the data for site 2. All authors contributed to the rest of the paper     

Development of composites based on recycled polyethylene/sugarcane bagasse fibers

In this work, sugarcane bagasse fibers were used as filler in composites having recycled high‐density polyethylene (PEr) as matrix. Because of the poor interaction between fibers surface and the PEr, the surface of bagasse was chemically modified. This modification consists of washing with water at 80°C, a mercerization process using sodium hydroxide and acetylation reaction with acetic anhydride. The chemical modification was characterized by Fourier transform infrared–horizontal attenuated total reflectance (FTIR‐HATR) and ¹³C nuclear magnetic resonance spectroscopies (NMR), thermogravimetric analysis (TGA), and scanning electronic microscopy (SEM). The composites were prepared from modified and unmodified fibers into PEr matrix, containing 5, 10, and 20% (w/w) of fiber. The samples were processed by extrusion and molds were prepared by injection process in order to perform mechanical tests. These materials were analyzed by SEM, TGA, and the water uptake was evaluated. Also, their mechanical properties were analyzed. Morphological analysis indicated that the chemical modification of sugarcane bagasse increased the compatibility between matrix and reinforcement. Tensile, flexural, and impact tests showed that the mechanical properties of the composite were improved compared to PEr due to the presence of the fibers. POLYM. COMPOS., 35:768–774, 2014. © 2013 Society of Plastics Engineers     

Role of surface-inoculated Debaryomyces hansenii and Yarrowia lipolytica strains in dried fermented sausage manufacture. Part 2: Evaluation of their effects on sensory quality and biogenic amine content

The aim was to study the effects of Debaryomyces hansenii and Yarrowia lipolytica strains, used with lactic acid starter cultures (Lactobacillus plantarum), in the manufacture of dried fermented sausages in order to understand their effects on volatile profile, biogenic amine content and sensory properties. The experimental data showed that every yeast strain produced a specific profile of volatile metabolic products. The yeasts also gave sausages with distinctive sensory properties. The degree of mincing also influenced these properties, but none of these factors had significant influence upon the accumulation of biogenic amines.     

Emission factors for gas-powered vehicles traveling through road tunnels in São Paulo, Brazil

The objective of this study was to improve the vehicular emissions inventory for the light- and heavy-duty fleet in the metropolitan area of S?o Paulo (MASP), Brazil. To that end, we measured vehicle emissions in road tunnels located in the MASP. On March 22-26, 2004 and May 04-07, 2004, respectively, CO, CO2, NOx, SO2, and volatile organic compounds (VOCs) emissions were measured in two tunnels: the Janio Quadros, which carries light-dutyvehicles; and the Maria Maluf, which carries light-duty vehicles and heavy-duty diesel trucks. Pollutant concentrations were measured inside the tunnels, and background pollutant concentrations were measured outside of the tunnels. The mean CO and NOx emission factors (in g km(-1)) were, respectively, 14.6 +/- 2.3 and 1.6 +/- 0.3 for light-duty vehicles, compared with 20.6 +/- 4.7 and 22.3 +/- 9.8 for heavy-duty vehicles. The total VOCs emission factor for the Maria Maluf tunnel was 1.4 +/- 1.3 g km(-1). The main VOCs classes identified were aromatic, alkane, and aldehyde compounds. For the heavy-duty fleet, NOx emission factors were approximately 14 times higher than those found for the light-duty fleet. This was attributed to the high levels of NOx emissions from diesel vehicles.     

A review on the performance of Savonius wind turbines

This paper presents a review on the performance of Savonius wind turbines. This type of turbine is unusual and its application for obtaining useful energy from air stream is an alternative to the use of conventional wind turbines. Simple construction, high start up and full operation moment, wind acceptance from any direction, low noise and angular velocity in operation, reducing wear on moving parts, are some advantages of using this type of machine. Over the years, numerous adaptations for this device were proposed. The variety of possible configurations of the rotor is another advantage in using such machine. Each different arrangement of Savonius rotor affects its performance. Savonius rotor performance is affected by operational conditions, geometric and air flow parameters. The range of reported values for maximum averaged power coefficient includes values around 0.05–0.30 for most settings. Performance gains of up to 50% for tip speed ratio of maximum averaged power coefficient are also reported with the use of stators. Present article aims to gather relevant information about Savonius turbines, bringing a discussion about their performance. It is intended to provide useful knowledge for future studies.