Embedded deterministic test for low-cost manufacturing

You have probably heard that BIST takes too long and its fault coverage is low, and that deterministic test requires too many patterns. This article shows how on-chip compression and decompression techniques provide high fault coverage with low test times.     

Paste Residence Time in a Spouted Bed Dryer. III: Effect of Paste Properties and Quality Interactions

The aim of this study was to evaluate the effects of paste properties on residence time during drying in a spouted bed dryer with inert bodies. The effect of paste solids content, surface tension, and viscosity on the residence time distribution and the mean residence times were studied using factorial experimental designs. The inert bodies used were glass and polyethylene beads. The mean residence times varied from 13.6 to 16.3 and 12.2 to 17.7 min for drying on glass and polyethylene beads, respectively. The analysis of variance showed that mean residence times significantly depended on solids content and surface tension for glass beads and also on viscosity for polyethylene beads. The residence time distributions for all conditions studied fitted well to the perfect mixing cell when applying the continuous stirred vessels in series model analysis. The powder density, flowability, and particle size depended on paste properties and inert type.     

Probabilistic evaluation of lateral extent of soil liquefaction under earthquake loading

A Monte Carlo simulation method for calculating the probability of soil liquefaction of a finite area in which the ground motion is propagated upward from the bedrock through the soil layers is presented. The vertical propagation of the ground motion through the soil layers is analyzed using random vibration analysis. To account for the variability of soil properties with depth, the soil deposit is divided into layers. Within each layer the horizontal statistical correlation of the undrained cyclic shearing strength against liquefaction is taken into consideration by describing it as a two-dimensional homogeneous random field. The method computes the probability of liquefaction spreading over a specified area under a given earthquake loading considering the effects of spatial correlation of soil properties.     

Feminist identity and feminist therapy behaviors of women psychotherapists.

Investigated whether (1) feminist identity development for women therapists was related to their use of feminist therapy behaviors (FTBs) and (2) feminist identity development and use of FTBs for women therapists were related to self-identification as a feminist therapist. 153 women psychologists (aged 30–77 yrs) were administered a women's issues in therapy questionnaire, which included a short version of the Feminist Identity Scale (FIS; K. M. Rickard, 1989, 1990). Ss were categorized into stages of feminine identity development according to their scores on 4 subscales of the FIS: Passive-Acceptance (PA), Revelation (REV), Embeddedness (EMB), and Synthesis (SYN). Ss scoring high on SYN and REV, and low on PA, reported greater use of FTBs; scores on the EMB were not related to the use of FTBs. All 4 subscales were predictive of women therapists who self-identified as feminist therapists. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Liquid–liquid extraction of a recombinant protein with reverse micelles

Recombinant cytochrome b₅ was extracted into the reversed micelle phase of an anionic surfactant (AOT) in octane and back-extracted to a final aqueous phase. The extraction of the protein was controlled by an electrostatic mechanism, since it was dependent on the global charge of the protein. This was directly demonstrated by experiments with native and mutant cytochromes obtained by site directed mutagenesis. The back-extraction of cytochrome b₅ to a fresh aqueous phase was decreased by factors that reduced the size of the water pool of the organic phase, such as high salt concentrations (1–2 mol dm^?3 NaCl) and low temperatures (4°C), probably because of an increase in a favourable interaction of this protein with the surfactant at closer distances.     

Kinetic study of the decompositions involved in the thermal degradation of commercial azodicarbonamide

The transitions and reactions involved in the thermal treatment of several commercial azodicarbonamides (ADC) in an inert atmosphere have been studied by dynamic thermogravimetry analysis (TGA), mass spectrometry and Fourier transform infrared (FTIR) spectroscopy. A pseudo‐mechanistic model, involving several competitive and non‐competitive reactions, has been suggested and applied to the correlation of the weight loss data. The model applied is capable of accurately representing the different processes involved, and can be of great interest in the understanding and quantification of such phenomena, including the simulation of the instantaneous amount of gases evolved in a foaming process. In addition, a brief discussion on the methodology related to the mathematical modeling of TGA data is presented, taking into account the complex thermal behaviour of the ADC. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Nisin expression production from Lactococcus lactis in milk whey medium

BACKGROUND: Nisin is a commercially available bacteriocin produced by Lactococcus lactis ATCC 11454 and used as a natural agent in the biopreservation of food. In the current investigation, milk whey, a byproduct from dairy industries was used as a fermentation substrate for the production of nisin. Lactococcus lactis ATCC 11454 was developed in a rotary shaker (30 °C/36 h/100 rpm) using two different media with milk whey (i) without filtration, pH 6.8, adjusted with NaOH 2 mol L^?1 and without pH adjustment, both autoclaved at 121 °C for 30 min, and (ii) filtrated (1.20 µm and 0.22 µm membrane filter). These cultures were transferred five times using 5 mL aliquots of broth culture for every new volume of the respective media. RESULTS: The results showed that culture media composed of milk whey without filtration supplied L. lactis its adaptation needs better than filtrated milk whey. Nisin titers, in milk whey without filtration (pH adjusted), was 11120.13 mg L^?1 in the second transfer, and up to 1628‐fold higher than the filtrated milk whey, 6.83 mg.L^?1 obtained in the first^t transfer. CONCLUSIONS: Biological processing of milk byproducts (milk whey) can be considered a profitable alternative, generating high‐value bioproducts and contributing to decreasing river disposals by dairy industries. Copyright © 2008 Society of Chemical Industry     

A model for the seismic reliability assessment of electric power transmission systems

A comprehensive model to evaluate the seismic reliability of electric power transmission systems is presented. The model provides information on the probability of structural failure of critical equipment at the major substations, from which the corresponding probabilities of power disruption to a given service area are determined. With the proposed methodology earthquake ground motions are defined as stochastic processes, and seismic capacities of electrical equipment are determined on the basis of available test data and simple modeling, from which fragility functions of critical equipment and specific substations are developed. Probabilities of power disruption resulting from network disconnectivity and abnormal power flow are assessed through Monte Carlo simulation. As a case study, the proposed model is applied to the electric power network in San Francisco and vicinity under the 1989 Loma Prieta earthquake, and the probabilities of power interruption are contrasted with the actual power failures observed during that earthquake.     

Biochemical changes in cerebrospinal fluid associated with the neurotoxic action of HIV-1]

Different intravascular ultrasound (IVUS) systems vary in their image presentation. The purpose of this study was to compare four IVUS systems in vitro to determine the accuracy of tissue characterization of atherosclerotic plaque compared with histology. Ninety-eight plaque segments from 23 formalin-fixed human iliac arteries were imaged in saline at room temperature with four different IVUS systems. To assess the accuracy of IVUS in describing plaque, three types of analysis were performed: (1) the ability to identify the presence and extent of lumen or plaque boundary; (2) sensitivity, specificity, and interobserver variability of IVUS in qualitatively identifying plaque components compared with histology; and (3) quantification of calcification. The synthetic aperture device had a lower sensitivity in identifying lumen and plaque boundaries (87%, 38% respectively) compared with other machines (96%-100%, 95%-100%). All three mechanically rotating systems had fair to good sensitivities for identifying calcification (57%-73%) or lipid filled areas (50%-83%). The sensitivity of discriminating fibrous tissue from fatty areas was low (39%-52%). The synthetic aperture system had a significantly lower sensitivity for identifying all three tissue types (4%-21%). There was significant interobserver variability (kappa value = 0.47-0.68) as well as machine to machine variability (kappa value = 0.52) for tissue characterization. Calcified areas were underestimated by System 1 (p < .05) and System 4 (p < .01) because of weaker echo reflections or poor image quality. There are significant differences in image representation among these four IVUS systems in the diagnosis of tissue components of complex atherosclerotic plaque. These variabilities should be considered when interpreting studies performed with different machines.     

Testing of the multi-application small light water reactor (MASLWR) passive safety systems

Experimental thermal hydraulic research has been conducted at Oregon State University for the purpose of assessing the performance of a new reactor design concept, the multi-application small light water reactor (MASLWR). The MASLWR is a pressurized light water reactor design with a net output of 35 MWe that uses natural circulation in both normal and transient operation. Due to its small size, portability and modularity, the MASLWR design is well suited to help fill the potential need for grid appropriate reactor designs for smaller electricity grids as may be found in developing or remote regions. The purpose of the OSU MASLWR test facility is to assess the operation of the MASLWR under normal full operating pressure and full temperature conditions and to assess the passive safety systems under transient conditions. The data generated by the testing program will be used to assess computer code calculations and to provide a better understanding of the thermal-hydraulic phenomena in the design of the MASLWR NSSS. During this testing program, four tests were conducted at the OSU MASLWR test facility. These tests included one design basis accident and one beyond design basis accident. During the performance of these tests, plant operations to include start up, normal operation and shut down evolutions were demonstrated successfully.