Extension of the Stokes equation for layered constructions to fluorescent turbid media

Expressions relating the bispectral reflectance of a stack of n fluorescing layers to each individual layer's reflectance and transmittance are derived. This theoretical framework is used together with recently proposed extensions of the Kubelka-Munk model to study the fluorescence from layered turbid media. For one layer over a reflecting background, the model is shown to give the same results as a previous model. The extension to n layers with different optical properties allows simulating the bispectral reflectance from a pad of layered turbid media. The applicability of the model is exemplified with an optimization of fluorophore distribution in layered turbid media.     

Modelling of electro hydraulic free and die forming of sheet steels

Electro hydraulic forming of a range of different sheet steels was studied experimentally and with finite element methods. Four carbon and stainless sheet materials were studied. In this paper we present results on a mild steel (IF210), two high strength steels (DPX800 and TRIP700) and one stainless steel (1.4509). The flow properties of the materials were evaluated at a range of strain rates up to 1000/s. These were typical strain rates in the FE simulations. The flow properties were characterized with the Johnson Cook model. Electro hydraulic forming trails were performed with a chamber of water with a pair of electrodes on one side of the sheet. In one case free forming was performed and in the other case forming was performed into a truncated conical die. Geometrical shapes and strain distributions were evaluated after forming. A finite element model was formulated in ABAQUS explicit. The model takes the chamber filled with water into account and the effect of the electrical discharge is modeled as a pressure wave originating from the location of the electrodes. The sheet is given the properties defined by the Johnson Cook model and stiff tools are used. The forming of the sheet is described including rebound effects at the tools. The model shows satisfactory results in relation to the experimental trials regarding both shape and strains of the pressed sheets.     

Operational ore/waste classification at a surface gold mine

Abstract

The daily determination of ore blocks and waste blocks in a surface gold mine can be formulated as a binary integer programming problem. While the geometric mining constraints complicate the problem beyond the capabilities of standard algorithms, the special structure of the problem allows the development of a fast alternative. Using the theory of generalized Lagrange multipliers, the problem can be decomposed into a series of one dimensional problems amenable to a dynamic programming solution.     

Optical modeling of organic solar cells based on CuPc and C60

We have investigated the influence of the poly(3,4-ethylenedioxythiophene)-blend-poly(styrene-sulfonate) (PEDOT:PSS) layer on the short-circuit current density (J(sc)) of single planar heterojunction organic solar cells based on a copper phthalocyanine (CuPc)-buckminsterfullerene (C(60)) active layer. Complete optical and electrical modeling of the cell has been performed taking into account optical interferences and exciton diffusion. Comparison of experimental and simulated external quantum efficiency has allowed us to estimate the exciton diffusion length to be 37 nm for the CuPc and 19 nm for the C(60). The dependence of short-circuit current densities versus the thickness of the PEDOT:PSS layer is analyzed and compared with experimental data. It is found that the variation in short-circuit current densities could be explained by optical interferences.     

Generation and characterization of a novel recombinant antibody against 15-ketocholestane isolated by phage-display

The employment of monoclonal antibodies (Mabs) to identify disease-associated biomarkers in clinical samples represents the underlying principle for many diagnostic tests. To date, these have been principally developed for protein targets with few reported applications for lipids due to their hydrophobicity and poor immunogenicity. Oxysterols represent a family of lipids implicated in diverse human diseases where Mab-based detection assays could have a profound effect on their utility as clinical biomarkers. These are usually identified in patients' samples by mass- spectrometry based approaches. Here, we describe an antibody phage-library based screening methodology for generating a recombinant monoclonal antibody (RAb) targeting the oxysterol-15-ketocholestane (15-KA), a lipid implicated in multiple sclerosis and Autoimmune Encephalomyelitis (EAE). The antibody is highly specific for 15-KA and shows little or no binding activity for other closely related oxysterols. We employ RAb2E9 to address the controversy over whether 15-KA is a true biomarker for MS/EAE and show that 15-KA is undetectable in serum taken from mice with EAE using antibody based detection methodologies; a finding confirmed by mass-spectrometry analysis. This study demonstrates the technical feasibility of using phage display to isolate highly specific antibodies against poorly immunogenic, small molecule lipids.     

Highly Conductive Poly(3,4‐ethylenedioxythiophene):Poly (styrenesulfonate) Films Using 1‐Ethyl‐3‐methylimidazolium Tetracyanoborate Ionic Liquid

Highly conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films are obtained using ionic liquids as additives. Upon adding 1‐ethyl‐3‐methylimidazolium tetracyanoborate (EMIM TCB) to the conducting polymer, the conductivity increases to 2084 S cm^?1; this is attributed to the phase separation of PSS leading to a structural change in the film. A comparative study with 1‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMIM BF₄) shows that EMIM TCB gives higher conductivity and transmittance and can be regarded as one of the most promising additives for the preparation of indium tin oxide (ITO)‐free organic devices using PEDOT:PSS/EMIM TCB as electrodes.     

Reconstructing the 3D shape and bone mineral density distribution of the proximal femur from dual-energy X-ray absorptiometry

The accurate diagnosis of osteoporosis has gained increasing importance due to the aging of our society. Areal bone mineral density (BMD) measured by dual-energy X-ray absorptiometry (DXA) is an established criterion in the diagnosis of osteoporosis. This measure, however, is limited by its two-dimensionality. This work presents a method to reconstruct both the 3D bone shape and 3D BMD distribution of the proximal femur from a single DXA image used in clinical routine. A statistical model of the combined shape and BMD distribution is presented, together with a method for its construction from a set of quantitative computed tomography (QCT) scans. A reconstruction is acquired in an intensity based 3D-2D registration process whereby an instance of the model is found that maximizes the similarity between its projection and the DXA image. Reconstruction experiments were performed on the DXA images of 30 subjects, with a model constructed from a database of QCT scans of 85 subjects. The accuracy was evaluated by comparing the reconstructions with the same subject QCT scans. The method presented here can potentially improve the diagnosis of osteoporosis and fracture risk assessment from the low radiation dose and low cost DXA devices currently used in clinical routine.     

New huprine derivatives functionalized at position 9 as highly potent acetylcholinesterase inhibitors

A series of 24 huprine derivatives diversely functionalized at position 9 have been synthesized and evaluated for their inhibitory activity against human recombinant acetylcholinesterase (AChE). These derivatives were prepared in one to five steps from huprine 1 bearing an ester function at position 9. Ten analogues ( 1 , 2 , 6 – 9 , 13 – 15 , and 23 ) are active in the low nanomolar range (IC₅₀ <5 nM ), very close to the parent compound huprine X. Compounds 2 , 6 , and 7 show a very good selectivity for AChE, with AChE inhibitory activities 700–1160‐fold higher than those for butyrylcholinesterase (BChE). The inhibitory potency of these compounds decreases with the steric bulk of the substituents at position 9. According to docking simulations, small substituents fit into the acyl‐binding pocket, whereas the larger ones stick out of the active site gorge of AChE. Determination of the kinetic parameters of three of the most potent huprines ( 2 , 6 , and 7 ) showed that most of the difference in K_D is accounted by a decrease in k_on, which is correlated to the increase of the substituent size. A first in vivo evaluation has been performed in mice for the most active compound 2 (IC₅₀=1.1 nM ) and showed a rather weak toxicity (LD₅₀=40 mg kg^?1) and an ability to cross the blood–brain barrier with doses above 15 mg kg^?1.     

Improving Biocompatibility of Implantable Metals by Nanoscale Modification of Surfaces: An Overview of Strategies,Fabrication Methods,and Challenges

The human body is an intricate biochemical–mechanical system, with an exceedingly precise hierarchical organization in which all components work together in harmony across a wide range of dimensions. Many fundamental biological processes take place at surfaces and interfaces (e.g., cell–matrix interactions), and these occur on the nanoscale. For this reason, current health‐related research is actively following a biomimetic approach in learning how to create new biocompatible materials with nanostructured features. The ultimate aim is to reproduce and enhance the natural nanoscale elements present in the human body and to thereby develop new materials with improved biological activities. Progress in this area requires a multidisciplinary effort at the interface of biology, physics, and chemistry. In this Review, the major techniques that have been adopted to yield novel nanostructured versions of familiar biomaterials, focusing particularly on metals, are presented and the way in which nanometric surface cues can beneficially guide biological processes, exerting influence on cellular behavior, is illustrated. Frontispiece adapted from Reference 94 .

     

Designs and Applications of Circularly Polarized Thermally Activated Delayed Fluorescence Molecules

The design of fluorophores merging circularly polarized luminescence and thermally activated delayed fluorescence properties has recently emerged as a promising direction for the development of efficient CP-Organic Light-Emitting Diodes (CP-OLEDs). This progress report gives an overview of the molecular designs explored to obtain CP-TADF properties, of their performances as chiral emitters in CP-OLEDs, and discusses future challenges for this burgeoning field of research.