Direct synthesis of copper faujasite

Copper containing faujasite has been successfully prepared for the first time using a direct synthesis method. Faujasite type zeolite can be prepared in the presence of copper species by tuning the synthesis conditions. Ammonium hydroxide was used to form a copper complex that was later mixed with the reacting gel. Sodium is required to obtain copper faujasite. The complete elimination of sodium ions from the starting gel produces amorphous material. Crystallization took place at 358 K for 11 days. Crystallization temperature of 373 K produces ANA type zeolite as an impurity. Increasing by two times the amount of copper complex added to the reacting gel increases the crystallization time of Cu-FAU from 11 to 20 days (the crystallization rate decreases). The copper containing faujasite obtained was characterized by XRD, FESEM, EDX, EPR, FT-IR, TPR, and BET. According to the XRD pattern only FAU type zeolite was obtained. According to TPR experiments, the reduction temperature for Cu²⁺ ions present in Cu-FAU prepared by direct synthesis was 70 K more than for Cu-FAU prepared by ion-exchange. This difference can be due to the different location of the copper ions in the supercages or in the sodalite cages of the faujasite.     

Evidence for a synergistic interaction between isoprenaline and timolol on intraocular pressure in conscious rabbits

1. Interaction between topical isoprenaline and timolol on intraocular pressure was studied in conscious rabbits through changes of the dose-response curves. 2. Both drugs caused a dose-dependent fall of intraocular pressure mainly by reducing the aqueous humour formation. 3. When combined, timolol increased the response to submaximal concentrations of isoprenaline as well as EC50 (from 2.06 x 10(-3) M to 3.63 x 10(-3) M) and slope (from 1.21 to 1.89), but peak response to isoprenaline remained unchanged. 4. Discordance between experimental and theoretical additive curves as well as an interaction index smaller than 1 show that the interaction between both drugs is synergistic.     

Numerical study on PEMFC’s geometrical parameters under different humidifying conditions

Steady-state and three-dimensional simulations were carried out to study the influences of geometrical parameters on the performance of PEMFC under different hydrating conditions. Flow fields, species transport, transport of water in polymer membrane and movement of liquid water in cathode and anode porous layers were determined, in order to accomplish a complete estimation of ohmic and concentration losses of PEMFC power. The geometrical parameters were thickness of the polymer membrane, cathode catalyst layer as well as gas channel to rib width ratio. Every simulation was made under different relative humidities of inlet flows (50 and 100%) for every change of characteristic length. Results show that the influence of the geometrical parameters on ohmic and concentration losses is of considerable importance. The performance of PEMFC is seriously affected under dehydrating conditions. However, such performance may be considerably improved by using suitable geometrical parameters. Cathode and anode liquid saturation may not only affect the transport of species, but also the polymer electrolyte water content. These results show the importance of simultaneously calculating both the water absorption and desorption through the polymer electrolyte and the liquid saturation in the cathode and anode porous mediums to obtain an actual view of ohmic and concentration losses of the PEMFC performance.     

Floor free 10-Gb/s transmission with directly modulated GaInNAs-GaAs 1.35-/spl mu/m laser for metropolitan applications

Among the new semiconductor materials for telecom devices, the GaInNAs-GaAs structure presents interesting properties for low-cost applications, like high differential gain and high T/sub 0/. Another key aspect of the performance is the behavior of the GaInNAs-GaAs based lasers under high bit rate direct modulation. Here, we demonstrate the dynamic capabilities of GaInNAs-GaAs three-quantum-well ridge structure through 2.5-Gb/s directly modulated laser emission and transmission on standard fiber, in the temperature range 25/spl deg/C-85/spl deg/C. Besides transmission is demonstrated up to 10 Gb/s at 25/spl deg/C on the same fiber, without penalty and bit-error-rate floor.     

Scientific and technological performance evaluation of the Spanish Council for Scientific Research (CSIC) in the field of Biotechnology

An evaluation of the Spanish CSIC performance in Biotechnology, as compared with those of the French CNRS and the Italian CNR, has been carried out to determine the balance between the generation of scientific knowledge and the transfer of technology. This study shows a high scientific productivity mostly in journals with moderate impact factor, a low generation of patents and an insufficient transfer of knowledge to the Spanish companies. Other indicators confirm the existence of competitive human resources in biotechnological research producing scientific knowledge of interest for the development of patents and that cooperates successfully at European level.     

Multifractal analysis of non-conformal repellers: a model case

For a model class of repellers of non-conformal expanding maps, we obtain sharp lower bounds for the dimension spectra of the Birkhoff averages of a Hölder continuous function. As in the well-studied case of conformal dynamics, the bounds are also expressed here in terms of the thermodynamic formalism.     

Synthesis of oleyl oleate as a jojoba oil analog

Synthesis of a wax ester analog of jojoba oil was accomplished from oleic acid and oleyl alcohol with a zeolite as catalyst. A full 2³ factorial design at two levels has been used in the synthesis. The variables selected were temperature, reduced pressure and initial catalyst concentration. The most important variable within the range studied was temperature. Reduced pressure had a negative influence, and initial catalyst concentration showed a positive influence on the process. A response equation has been determined for the yield of ester. The properties of the synthesized product are similar to those of natural jojoba oil.