Complexes of Silver(I) Ions and Silver Phosphate Nanoparticles with Hyaluronic Acid and/or Chitosan as Promising Antimicrobial Agents for Vascular Grafts

Polymers are currently widely used to replace a variety of natural materials with respect to their favourable physical and chemical properties, and due to their economic advantage. One of the most important branches of application of polymers is the production of different products for medical use. In this case, it is necessary to face a significant disadvantage of polymer products due to possible and very common colonization of the surface by various microorganisms that can pose a potential danger to the patient. One of the possible solutions is to prepare polymer with antibacterial/antimicrobial properties that is resistant to bacterial colonization. The aim of this study was to contribute to the development of antimicrobial polymeric material ideal for covering vascular implants with subsequent use in transplant surgery. Therefore, the complexes of polymeric substances (hyaluronic acid and chitosan) with silver nitrate or silver phosphate nanoparticles were created, and their effects on gram-positive bacterial culture of Staphylococcus aureus were monitored. Stages of formation of complexes of silver nitrate and silver phosphate nanoparticles with polymeric compounds were characterized using electrochemical and spectrophotometric methods. Furthermore, the antimicrobial activity of complexes was determined using the methods of determination of growth curves and zones of inhibition. The results of this study revealed that the complex of chitosan, with silver phosphate nanoparticles, was the most suitable in order to have an antibacterial effect on bacterial culture of Staphylococcus aureus. Formation of this complex was under way at low concentrations of chitosan. The results of electrochemical determination corresponded with the results of spectrophotometric methods and verified good interaction and formation of the complex. The complex has an outstanding antibacterial effect and this effect was of several orders higher compared to other investigated complexes.     

Response of real-time black carbon mass instruments to mini-CAST soot

Soot is a climate forcer and a dangerous air pollutant that has been increasingly regulated. In aviation, regulatory measurements of soot mass concentration in the exhaust of aircraft turbine engines are to be based on measurements of black carbon (BC) calibrated to elemental carbon (EC) content of diffusion flame soot. The calibration soot must currently meet only one criterion: minimum EC to total carbon (TC) ratio of 0.8. However, not including soot properties other than the EC/TC ratio may potentially lead to discrepancies between different BC measurements. We studied the response of two instruments, the AVL Micro-Soot Sensor (MSS) and the Artium Laser-Induced Incandescence 300 (LII), to soot from two miniature combustion aerosol standard (mini-CAST) burners. By changing the air-fuel ratio, premixing nitrogen into the fuel, and using a catalytic stripper to remove volatile compounds, we produced a wide range of particle morphologies and EC contents. As the EC content decreased, both the instruments underreported the EC mass, but the LII diverged more severely. Upon closer investigation of eight conditions with EC/TC > 0.8, the LII underreporting was found independent of primary particle size, but increased with decreasing geometric mean diameter of the soot agglomerates. As the geometric mean diameter decreased from 160 nm to 50 nm, the differences between the LII and MSS increased from 15% to 50%. The results suggest that in addition to EC content, calibration procedures for the regulatory BC measurements may need to take particle size distributions into account.

© 2016 American Association for Aerosol Research     

Kinetics of Multi‐Step Redox Processes by Time‐Resolved In Situ X‐ray Diffraction

The kinetics of redox reactions of iron oxide in oxygen carrier 50Fe₂O₃/MgAl₂O₄ are examined using different time‐resolved techniques. Reduction kinetics are studied by H₂ temperature‐programmed reduction (H₂‐TPR) monitored by time‐resolved in situ XRD. In contrast to conventional TPR, in situ XRD distinguishes the three‐stage reduction of Fe₂O₃ → Fe₃O₄ → FeO → Fe. It also shows that the oxidation of Fe → Fe₃O₄ by CO₂ has no intermediate crystalline phases, explaining why its kinetics can easily be investigated by conventional CO₂ temperature‐programmed oxidation (CO₂‐TPO). A shrinking core model which takes into account solid state diffusion allows describing the experimental data.     

Fourier‐Transform Rheology of Unvulcanized,Carbon Black Filled Styrene Butadiene Rubber

Rubber materials filled with reinforcing fillers display nonlinear rheological behavior at small strain amplitudes below γ₀ < 0.1. Nevertheless, rheological data are analyzed mostly in terms of linear parameters, such as shear moduli (G′, G″), which loose their physical meaning in the nonlinear regime. In this work styrene butadiene rubber filled with carbon black (CB) under large amplitude oscillatory shear (LAOS) is analyzed in terms of the nonlinear parameter I_3/1. Three different CB grades are used and the filler load is varied between 0 and 70 phr. It is found that I_3/1(φ) is most sensitive to changes of the total accessible filler surface area at low strain amplitudes (γ₀ = 0.32). The addition of up to 70 phr CB leads to an increase of I_3/1(φ) by a factor of more than ten. The influence of the measurement temperature on I_3/1 is pronounced for CB levels above the percolation threshold.

     

Nanoporous artificial proboscis for probing minute amount of liquids

We describe a method of fabrication of nanoporous flexible probes which work as artificial proboscises. The challenge of making probes with fast absorption rates and good retention capacity was addressed theoretically and experimentally. This work shows that the probe should possess two levels of pore hierarchy: nanopores are needed to enhance the capillary action and micrometer pores are required to speed up fluid transport. The model of controlled fluid absorption was verified in experiments. We also demonstrated that the artificial proboscises can be remotely controlled by electric or magnetic fields. Using an artificial proboscis, one can approach a drop of hazardous liquid, absorb it and safely deliver it to an analytical device. With these materials, the paradigm of a stationary microfluidic platform can be shifted to the flexible structures that would allow one to pack multiple microfluidic sensors into a single fiber.     

Structure-function studies of an engineered scaffold protein derived from Stefin A. II: Development and applications of the SQT variant

Constrained binding peptides (peptide aptamers) may serve as tools to explore protein conformations and disrupt protein-protein interactions. The quality of the protein scaffold, by which the binding peptide is constrained and presented, is of crucial importance. SQT (Stefin A Quadruple Mutant-Tracy) is our most recent development in the Stefin A-derived scaffold series. Stefin A naturally uses three surfaces to interact with its targets. SQT tolerates peptide insertions at all three positions. Peptide aptamers in the SQT scaffold can be expressed in bacterial, yeast and human cells, and displayed as a fusion to truncated pIII on phage. Peptides that bind to CDK2 can show improved binding in protein microarrays when presented by the SQT scaffold. Yeast two-hybrid libraries have been screened for binders to the POZ domain of BCL-6 and to a peptide derived from PBP2', specific to methicillin-resistant Staphylococcus aureus. Presentation of the Noxa BH3 helix by SQT allows specific interaction with Mcl-1 in human cells. Together, our results show that Stefin A-derived scaffolds, including SQT, can be used for a variety of applications in cellular and molecular biology. We will henceforth refer to Stefin A-derived engineered proteins as Scannins.     

NMR relaxation reveals modifications in rubber phase dynamics during long-term degradation of high-impact polystyrene (HIPS)

The microstructure of rubber-modified polystyrene after thermal ageing at 90 °C and multiple extrusion was analyzed by time-domain nuclear magnetic resonance (TD-NMR) in a non-destructive manner. The transverse magnetization decay behaviour observed in TD-NMR was related to the total rubber fraction and its cross-linking density. The data reveal different mechanisms of long-term rubber degradation in high-impact polystyrene (HIPS) during thermo-oxidation and multiple processing: Multiple processing causes a slight increase in the cross-linking density of the rubber phase, without appreciably altering the total amount of rubber fraction. Thermo-oxidation is accompanied by a significant overall decrease of the rubber fraction, an increase of the cross-linking density, and a pronounced increase of the non-crosslinked fraction (chain ends and fragmented segments). The NMR results correlate well with spectroscopic observations and moderately with macroscopic mechanical properties.     

Synthesis and SAR of Tetracyclic Inhibitors of Protein Kinase CK2 Derived from Furocarbazole W16

The serine/threonine kinase CK2 modulates the activity of more than 300 proteins and thus plays a crucial role in various physiological and pathophysiological processes including neurodegenerative disorders of the central nervous system and cancer. The enzymatic activity of CK2 is controlled by the equilibrium between the heterotetrameric holoenzyme CK2α₂β₂ and its monomeric subunits CK2α and CK2β. A series of analogues of W16 ((3aR,4S,10S,10aS)-4-{[(S)-4-benzyl-2-oxo-1,3-oxazolidin-3-yl]carbonyl}-10-(3,4,5-trimethoxyphenyl)-4,5,10,10a-tetrahydrofuro[3,4-b]carbazole-1,3(3aH)-dione ((+)- 3 a )) was prepared in an one-pot, three-component Levy reaction. The stereochemistry of the tetracyclic compounds was analyzed. Additionally, the chemically labile anhydride structure of the furocarbazoles 3 was replaced by a more stable imide ( 9 ) and N-methylimide ( 10 ) substructure. The enantiomer (−)- 3 a (K_i=4.9 μM) of the lead compound (+)- 3 a (K_i=31 μM) showed a more than sixfold increased inhibition of the CK2α/CK2β interaction (protein-protein interaction inhibition, PPII) in a microscale thermophoresis (MST) assay. However, (−)- 3 a did not show an increased enzyme inhibition of the CK2α₂β₂ holoenzyme, the CK2α subunit or the mutated CK2α′ ^C336S subunit in the capillary electrophoresis assay. In the pyrrolocarbazole series, the imide (−)- 9 a (K_i=3.6 μM) and the N-methylimide (+)- 10 a (K_i=2.8 μM) represent the most promising inhibitors of the CK2α/CK2β interaction. However, neither compound could inhibit enzymatic activity. Unexpectedly, the racemic tetracyclic pyrrolocarbazole (±)- 12 , with a carboxy moiety in the 4-position, displays the highest CK2α/CK2β interaction inhibition (K_i=1.8 μM) of this series of compounds.     

Porous,Sintered Glass‐Ceramics from Inorganic Polymers Based on Fayalite Slag

The present paper deals with the synthesis of porous, sintered glass‐ceramics obtained at temperatures below 1150°C, originating from inorganic polymers based on fayalite slag. Firing led to the evaporation of water, dehydroxylation, and oxidation of Fe²⁺ above 345°C. For heating >700°C, the Si–O stretching band shifted from the 1160 and 750 cm^?1 to the 1255 and 830 cm^?1 region, due to a structural reorganization of the amorphous phase, whereas Fe–O bands appeared at 550 cm^?1. The final microstructure consisted predominantly of an amorphous phase, hematite, and franklinite. The open porosity and compressive strength decreased and increased, respectively, as the firing temperature increased. The final values suggest properties comparable to that of structural lightweight concrete, still, the materials synthesized herein, are lighter, and made primarily from secondary resources.     

Raman spectroscopy and TEM characterization of solid particulate matter emitted from soot generators and aircraft turbine engines

To obtain reliable mass concentrations of solid particulate matter (PM) in the exhaust emissions from engines using optical instruments, it is essential that the solid PM used for instrument calibration has similar optical properties to the solid PM emitted from the engines being tested. The solid PM emitted from combustion engines is predominantly soot. The optical properties of soot are dictated by its chemical structure, size, and morphology. In this work, the chemical bond structure, primary-particle diameters, aggregate sizes, and morphological parameters of the soot emitted from two laboratory soot generators, widely used for calibrating instruments, are compared to those of soot emitted from three aircraft turbine engines using Raman spectroscopy and transmission electron microscopy. The Raman spectral properties, size, and morphology of soot emitted from aircraft engines are distinctly different from the properties of soot emitted from the soot generators operating under globally near-stoichiometric and fuel-rich conditions. These differences can be attributed to the variations in the size and orientation of the graphitic crystallites, amorphous-carbon content, amount of polyacetylene compounds, deposition of organic material, and extent of oxidation. Conversely, general agreement is observed between the chemical structure, size, and morphology of soot emitted from aircraft engines and the soot emitted from the soot generators operating at globally fuel-lean conditions. The findings of this investigation can be useful for identifying suitable soot particles for the calibration of instruments to measure the mass concentration of solid PM emissions from engines, and for other types of soot.

Copyright © 2017 Crown Copyright