Performance limitation of laser satellite communication due to vibrations and atmospheric turbulence: down‐link scenario

In this paper, we analyse the effects of vibrations and the atmosphere on the performance of a broadband laser inter‐satellite link (BLISL) which was studied within the framework of the BLISL joint Israeli–German applied research project. The use of optical radiation as a carrier between satellites and in satellite‐to‐ground links enables transmission using very narrow beam divergence angles. Due to the narrow beam divergence angle and the large distance between the satellite and the ground station or airplane the pointing is a complicated process. Further complication results from vibration of the pointing system caused by two fundamental mechanisms of a stochastic nature: (1) tracking noise created by the electro‐optic tracker and (2) vibrations caused by internal satellite mechanical mechanisms. Additionally an inhomogeneity in the temperature and pressure of the atmosphere leads to variations of the refractive index along the transmission path. These variations of refractive index as well as pointing vibrations can cause fluctuations in the intensity and the phase of the received signal leading to an increase in link error probability. In this paper, we develop a bit error probability (BEP) model that takes into account both pointing vibrations and turbulence‐induced log amplitude fluctuations (i.e. signal intensity fading) in a regime in which the receiver aperture D₀ is smaller than the turbulence coherence diameter d₀. Our results indicate that BLISL can achieve a BEP of 10^?9 and data rate of 1Gbps with normalized pointing vibration of G_T*σ_θ²=0.05 and turbulence of σ_X=0.3. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis of solid epoxy resins base on BPC II and bisphenol A using conventional heating equipment and microwave

New solid state epoxy resins based on diglycidyl ether of 1,1‐dichloro‐2,2 bis (4‐hydroxyphenyl), ethylene (BPC) and BPA epoxy resins in the reaction with BPC and BPA were developed. Solid epoxy resins were synthesised by the use of two different heating methods: conventional and microwave reactor. The use of microwave radiation as novel heating medium as an alternative to the conventional methods, which provide a quicker and more effective synthesis. The solid epoxies have high melting points higher than 100°C and the polycondensation degree remains between n = 4–12. Epoxy value stays low and occurs around 0,02–0,1. BPA epoxy resins and diglycidylether of BPC II were compared in terms of reaction speed. It can be seen that the reaction of BPC diglycidylether occurs approximately 20% quicker given the same reaction conditions of temperature, and balance of catalyst. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3850–3854, 2006     

Vermiculites intercalated with Al2O3 pillars and modified with transition metals as catalysts of DeNOx process

Vermiculites intercalated with alumina pillars and modified with transition metals (Cu, Fe) were studied as catalysts of selective reduction of NO with ammonia. Prior to the pillaring process, a raw vermiculite was treated with a solution of nitric acid and then citric or oxalic acid in order to reduce the overall charge of layers. This modification was necessary for a successful pillaring of the clay. Transition metals (Fe, Cu) were deposited on the surface of the modified vermiculites by an ion-exchange method. The obtained samples were characterized with respect to composition (EPMA), structure (XRD), texture (BET) and chemical nature of deposited transition metal species (UV–vis–DRS). The vermiculite based materials have been found to be active and selective catalysts of the DeNOx process. The Cu-containing samples were catalytically active at lower temperatures than the pillared clays modified with iron. A side reaction of ammonia oxidation by oxygen decreased the effectiveness of the DeNOx process in the high temperature range.     

Mechanical Properties and the Microstructure of Al2O3/Al/Al2O3 Joints with the Surface Modification of Alumina by a Thin Layer of Ti + Nb

Al₂O₃/Al/Al₂O₃ joints were formed by liquid-state bonding of alumina substrates covered with a thin Ti + Nb coating of 900 nm thickness with the use of an Al interlayer of 30 μm at 973 K under a vacuum of 0.2 mPa for 5 min. The bond strength of the joints was examined by a four-point bending test at 295, 373, and 473 K. Optical, scanning, and transmission electron microscopies were applied for detailed characterization of the interface structure and failure characteristics of fractured joint surfaces. The analysis of the results has shown that (i) bonding occurred due to the formation of a reactive interface on the metal side of the joint in the presence of Al₃Nb(Ti) precipitates and (ii) modification of Al₂O₃ by a thin layer of Ti + Nb increases the hardness at the interface and makes it possible to achieve reliable joints working at elevated temperatures.     

Discovery and biological activity of 6BrCaQ as an inhibitor of the Hsp90 protein folding machinery

Heat shock protein 90 (Hsp90) is a significant target in the development of rational cancer therapy, due to its role at the crossroads of multiple signaling pathways associated with cell proliferation and viability. Here, a novel series of Hsp90 inhibitors containing a quinolein‐2‐one scaffold was synthesized and evaluated in cell proliferation assays. Results from these structure–activity relationships studies enabled identification of the simplified 3‐aminoquinolein‐2‐one analogue 2 b (6BrCaQ), which manifests micromolar activity against a panel of cancer cell lines. The molecular signature of Hsp90 inhibition was assessed by depletion of standard known Hsp90 client proteins. Finally, processing and activation of caspases 7, 8, and 9, and the subsequent cleavage of PARP by 6BrCaQ, suggest stimulation of apoptosis through both extrinsic and intrinsic pathways.     

An efficient algorithm for processing data from a multi-point sensor of vibrations

A new technique of vibration sensing, based on a polarimetric fibre-optic strain sensor, is presented; it is designed for localisation of multiple sources of disturbances in a broad frequency spectrum without using fibre gratings. A mathematical model of the sensor is used for development of a variational method for estimation of amplitudes of component vibrations on the basis of noisy samples of the signal at the output of the sensor. This method is implemented in a new algorithm of estimation, being 100–1000 more efficient (in terms of computing time) than an algorithm published previously.     

The Structure and Bond Strength of Composite Carbide Coatings (WC-Co + Ni) Deposited on Ductile Cast Iron by Thermal Spraying

An investigation was conducted to determine the role of Ni particles in the WC-Co coating produced with the supersonic method on microstructure, mechanical, and wear properties in a system of type: WC-Co coating/ductile cast iron. The microstructure of the thermal-sprayed WC-Co + Ni coating was characterized by scanning electron and transmission electron microscopes as well as the analysis of chemical and phase composition in microareas (EDS, XRD). The microstructure of the WC-Co + Ni coating consisted of large, partially molten Ni particles and very fine grains of WC embedded in cobalt matrix, coming to the size of nanocrystalline. Moreover, the results were discussed in reference to examination of bending strength considering cracking and delamination in the system of (WC-Co + Ni)/ductile cast iron as well as hardness and wear resistance of the coating. It was found that the addition of Ni particles was significantly increase resistance to cracking and wear behavior in the studied system.     

Reduced Mating Success of Female Tortricid Moths Following Intense Pheromone Auto-Exposure Varies with Sophistication of Mating System

Mating disruption is a valuable tool for the management of pest lepidopteran species in many agricultural crops. Many studies have addressed the effect of female pheromone on the ability of males to find calling females but, so far, fewer have addressed the effect of pheromone on the mating behavior of females. We hypothesized that mating of female moth species may be adversely affected following sex pheromone auto-exposure, due to abnormal behavioral activity and/or antennal sensitivity. Our results indicate that, for Grapholita molesta and Pandemis pyrusana females, copulation, but not calling, was reduced following pre-exposure to sex pheromone. In contrast, for Cydia pomonella and Choristoneura rosaceana, sex pheromone pre-exposure did not affect either calling or copulation propensity. Adaptation of female moth antennae to their own sex pheromone, following sex pheromone auto-exposure, as measured by electroantennograms, occurred in a species for which identical exposure reduced mating success (G. molesta) and in a species for which such exposure did not affect mating success (C. rosaceana). These results suggest that pre-exposure of female moths of certain species to sex pheromone may further contribute to the success of pheromone-based mating disruption. Therefore, we conclude that, in some species, mating disruption may include a secondary mechanism that affects the mating behavior of female moths, in addition to that of males.     

Novel Lytic Enzyme of Prophage Origin from Clostridium botulinum E3 Strain Alaska E43 with Bactericidal Activity against Clostridial Cells

Clostridium botulinum is a Gram-positive, anaerobic, spore-forming bacterium capable of producing botulinum toxin and responsible for botulism of humans and animals. Phage-encoded enzymes called endolysins, which can lyse bacteria when exposed externally, have potential as agents to combat bacteria of the genus Clostridium. Bioinformatics analysis revealed in the genomes of several Clostridium species genes encoding putative N-acetylmuramoyl-l-alanine amidases with anti-clostridial potential. One such enzyme, designated as LysB (224-aa), from the prophage of C. botulinum E3 strain Alaska E43 was chosen for further analysis. The recombinant 27,726 Da protein was expressed and purified from E. coli Tuner(DE3) with a yield of 37.5 mg per 1 L of cell culture. Size-exclusion chromatography and analytical ultracentrifugation experiments showed that the protein is dimeric in solution. Bioinformatics analysis and results of site-directed mutagenesis studies imply that five residues, namely H25, Y54, H126, S132, and C134, form the catalytic center of the enzyme. Twelve other residues, namely M13, H43, N47, G48, W49, A50, L73, A75, H76, Q78, N81, and Y182, were predicted to be involved in anchoring the protein to the lipoteichoic acid, a significant component of the Gram-positive bacterial cell wall. The LysB enzyme demonstrated lytic activity against bacteria belonging to the genera Clostridium, Bacillus, Staphylococcus, and Deinococcus, but did not lyse Gram-negative bacteria. Optimal lytic activity of LysB occurred between pH 4.0 and 7.5 in the absence of NaCl. This work presents the first characterization of an endolysin derived from a C. botulinum Group II prophage, which can potentially be used to control this important pathogen.