Distribution of mono to octa-chlorinated PCDD/Fs in fly ash from a municipal solid-waste incinerator

We have estimated the concentration and distribution of the mono to octa-chlorinated congeners of polychlorinated dibenzo-p-dioxins (PCDD) and dibenzofurans (PCDF) in fly ashes at various sampling points in a large-scale municipal solid waste incinerator at Ume?, Sweden, as they cooled from 700 to 170 degrees C. Differences between the ashes were observed, the PCDD homologue profile was found to vary with temperature. The total amount of PCDD and PCDF increased as the temperature decreased in the postcombustion zone. The increase was due to both adsorption to the fly ash and formation of PCDD and PCDF. Mono-to trichlorinated PCDD predominated at high temperatures, whereas hepta- and octachlorinated PCDD predominated at temperatures below 400 degrees C. PCDF predominated over PCDD in the whole temperature range. However,the changes in homologue profile for PCDFwere minor. The isomer distribution within the homologue groups was not changed asthetemperature decreased in the postcombustion zone.     

Proxies and measurement techniques for mineral dust in Antarctic ice cores

To improve quantitative interpretation of ice core aeolian dust records, a systematic methodological comparison was made. This involved methods for water-insoluble particle counting (Coulter counter and laser-sensing particle detector), soluble ion analysis (ion chromatography and continuous flow analysis), elemental analysis (inductively coupled plasma mass spectroscopy at pH 1 and after full acid digestion), and water-insoluble elemental analysis (proton induced X-ray emission). Antarctic ice core samples covering the last deglaciation from the EPICA Dome C (EDC) and the EPICA Dronning Maud Land (EDML) cores were used. All methods correlate very well among each other, but the ratios of glacial age to Holocene concentrations, which are typically a factor approximately 100, differ between the methods by up to a factor of 2 with insoluble particles showing the largest variability. The recovery of ICP-MS measurements depends on the digestion method and is differentfor different elements and during different climatic periods. EDC and EDML samples have similar dust composition, which suggests a common dust source or a common mixture of sources for the two sites. The analyzed samples further reveal a change of dust composition during the last deglaciation.     

Implementation of energy efficiency measures in compressed air systems: barriers,drivers and non-energy benefits

Increased global competition and resource scarcity drives industrial companies to cut costs. Energy can be a significant component of such cuts, particularly for energy-intensive companies. Improving energy efficiency in industry is complex, as it pertains to various energy-using processes that are heavily intertwined. One such process is the compressed air system (CAS), which is used in most industrial companies worldwide. Since energy efficiency improvement measures for various types of energy-using processes differ, technology-specific measures might encounter different barriers to and drivers for energy efficiency. The same applies to the non-energy benefits (NEBs) related to energy efficiency improvement measures; since measures vary between various energy-using processes, the perceived NEBs might be different as well. The aim of this paper is to study the barriers to, drivers for and NEBs of CAS energy efficiency improvement measures from the perspectives of three actors. Carried out as an interview study combined with a questionnaire, the paper merges the perspectives of users, audit experts and suppliers of CASs. The results showed that the major barriers are related to the investment, or are of an organisational character, and that organisational and economic factors seemed to be important for making positive decisions on energy efficiency investments and measures in CASs. Major NEBs for CASs include productivity gains and the avoidance of capital expenditures. The results of this study also address the importance of having a comprehensive approach to recognise additional effects of energy efficiency improvements in CASs.     

Thin film measurement system for moving objects based on a laterally distributed linear variable filter spectrometer

Instantaneous measurement of optical or geometrical parameters of thin layers is an ambitious aim in many industrial applications. These layers have a variety of use-cases, such as optical bandpassing, dielectric permittivity, or lubrication. Mostly, these layers are in motion due to the production process. In order to observe process parameters, the motion usually has to be disrupted. Thus, the increase of production time due to control purposes is an undesirable drawback of this otherwise suitable technique. In this publication, we present a solution to this particular drawback of most production process monitoring systems exemplarily for film thickness measurement. We show the realization of a measurement principle which has, to our knowledge, never been published before in this application. Therefore, we exploit the advantages of the combination of a linear variable filter with a complementary metal oxide semiconductor sensor array. By an apt readout sequence, this measurement system is able to measure transmission spectra while the target is in motion. We show that this measurement system is able to measure film thicknesses of objects in the range of several 100 nm thickness at up to a velocity of 4 m/s. A reproducibility below 2 nm was acquired.     

Diversity of Properties of Device Structures Based on Group-III Nitrides,Related to Modification of the Fractal-Percolation System

A fractal-percolation system that includes extended defects and random fluctuations in the alloy composition is formed during the growth of device structures based on Group-III nitrides. It is established that the specific features of this system are determined not only by the growth conditions. It is shown that the diversity of the electrical and optical properties of InGaN/GaN LEDs (light-emitting diodes) emitting at wavelengths of 450–460 and 519–530 nm, as well as that of the electrical properties of AlGaN/GaN HEMT (high-electron-mobility transistor) structures, is due to modification of the properties of the fractal-percolation system both during the growth process and under the action of the injection current and irradiation. The influence exerted by these specific features on the service life of light-emitting devices and on the reliability of AlGaN/GaN HEMT structures is discussed.

     

di/dt Noise in CMOS Integrated Circuits

This is an overview paper presenting di/dtnoise from a designers perspective. Analysis and circuit designtechniques are presented taking package parasitics into account.The main focus is on digital CMOS design, but analysis and designsuggestions can easily be extended to mixed-mode design.     

Effect of Annealing on Luminescence of InGaN/GaN Structures Etched by a Focused Ion Beam

Semiconductors - The effect of annealing temperature and time on the luminescence intensity of the InGaN/GaN heterostructure subjected to ion beam etching was studied. We show that annealing at a...