基于RFID和ZigBee技术的物联网实验系统硬件设计与实现

基于射频识别技术(Radio frequency identification technology,RFID)和近距离无线组网通讯技术(ZigBee:紫蜂)这两大物联网关键技术,设计以ZigBee协议作为传输协议的物联网主从节点以及RFID读写模块,得到了物联网实验系统的总体方案,并实现了一套完整的物联网实验系统硬件平台.测试结果验证了该实验系统完全满足设计要求,可以应用于教学实验,也可作为其他物联网应用系统的开发.     

A Simple Method for Millimeter-Wave Finline Balanced Mixer Design Using Three-Dimensional Field Simulation Software

In this paper, a simple method for millimeter-wave finline balanced mixer design using three-dimensional field simulation software has been proposed. The method can be widely used to design the diode-based circuits, especially for the circuit structures with orthogonal field in some specific hybrid integrated circuits which are unavailable to be designed using the circuit simulator. In these circuits, the power directly at diodes is correlated to the input reflection coefficient. The diodes mounted on the finline circuits are defined as impedance boundary in the commercial computer-aided design (CAD) tool High Frequency Structure Simulator (HFSS) model, and hence simulation with the use of HFSS can be implemented to optimize the input matching network of the finline circuits for transferring maximum power to the diodes. Two finline balanced mixers at U-band using commercial GaAs Schottky diodes have been designed and fabricated to validate this method. Matching structures at the radio frequency (RF) port have been employed for a better return loss and a lower conversion loss. Experiment results are presented and show good agreement with simulation data. The proposed method has proven to be useful for the design of millimeter-wave mixers in finline technique.     

微覆盖解决高低层混合居民楼深度覆盖的应用

城区高低层混合居民楼区域作为无线网络覆盖难点,传统宏站无法进行有效的覆盖。本文通过采用“微覆盖、微对打”的建设方式有效解决“高低层混合居民楼”无线网络信号的深度覆盖问题。     

共基极与共发射极结构的InP DHBT器件功率特性

制作了发射极面积为1μm×15μm×4指的InP DHBT器件,器件拓扑使用了共基极和共发射极两种结构,通过负载牵引测试系统对器件功率特性进行测试。在功率优化匹配条件下,所测得最大输出功率密度和相应的功率附加效率(PAE)在10GHz下为1.24W/mm和50%,在18GHz下的数据为0.82W/mm和26%。测试同时表明,共发射极结构相对稳定和易于匹配,共基极模式具有更大的输出功率潜力,但需要进一步解决难于匹配、容易振荡和寄生参量影响等问题。在功放电路设计中,可以根据不同需求选择合适的电路拓扑结构。     

凝结泵高压变频器几种冷却方式的可行性论证

高压变频器应用中的设备散热和运行环境问题一直是变频器生产厂家和现场应用所关心的问题之一。本文介绍了几种冷却方式,并以2240kW凝结泵高压变频器的冷却解决方案为例,对这几种冷却方式进行可行性分析论证。     

直接序列扩频通信系统三种干扰方式的仿真

介绍了直接序列扩频通信系统的三种干扰方式,设计了基于simulink的干扰信号产生模块,并仿真了其频谱图。最后仿真出干扰方式对直扩系统影响的误码率曲线,证明了设计的三种干扰信号产生方式能够有效地干扰通信系统。     

基于高速DSP的跳频通信系统设计

文章研究了跳频通信的实现方法,提出了一种基于高速DSP的跳频通信系统的硬件实现方案,详细给出了跳频控制模块的硬件设计、跳频同步方法、伪码的产生和部分电路设计。该系统可应用于短波和超短波跳频通信装备。     

Leveraging Bioinspired Structural Constraints for Tunable and Programmable Snapping Dynamics in High-Speed Soft Actuators

Creating high-speed soft actuators will have broad engineering and technological applications. Snapping provides a power-amplified mechanism to achieve rapid movements in soft actuators that typically show slow movements. However, precise control of snapping dynamics (e.g., speed and direction of launching or jumping) remains a daunting challenge. Here, a bioinspired design principle is presented that harnesses a reconfigurable constraint structure integrated into a photoactive liquid crystal elastomer actuator to enable tunable and programmable control over its snapping dynamics. By reconfiguring constrained fin-array-shaped structure, the snapping dynamics of the structured actuator, such as launching or jumping angle and height, motion speed, and release force can be on-demand tuned, thus enabling controllable catapult motion and programmable jumping. Moreover, the structured actuators exhibit a unique combination of ultrafast moving speed (up to 2.5 m s⁻¹ in launching and 0.22 m s⁻¹ in jumping), powerful ejection (long ejection distance of ≈20 cm, 35 mg ball), and high jumping height (≈8 cm, 40 times body lengths), which few other soft actuators can achieve. This study provides a new universal design paradigm for realizing controllable rapid movements and high-power motions in soft matter, which are useful for building high-performance soft robotics and actuation devices.     

An Artificial Motion and Tactile Receptor Constructed by Hyperelastic Double Physically Cross-Linked Silk Fibroin Ionoelastomer

Ionotronic artificial motion and tactile receptor (i-AMTR) is essential to realize an interactive human-machine interface. However, an i-AMTR that effectively mimics the composition, structure, mechanics, and multi-functionality of human skin, called humanoid i-AMTR, is yet to be developed. To bridge this technological gap, this study proposes a strategy that combines molecular structure design and function integration to construct a humanoid i-AMTR. Herein, a silk fibroin ionoelastomer (SFIE) with double cross-linked molecular structure is designed to mimic the composition and structure of human skin, thereby resolving the conflict of stretchability, softness, and resilience, suffered by many previously reported ionotronics. Functionally, electromechanical sensing and triboelectricity-based tactile perception are integrated into SFIE, to enable simultaneous perception of both motion and tactile inputs. By further leveraging the machine learning and Internet of Things (IoT) techniques, the proposed SFIE-based humanoid i-AMTR precisely senses the movement of human body and accurately sortball objects made of different materials. Notably, the success rate for 610 sorting tests reaches as high as 92.3%. These promising results essentially demonstrate a massive potential of humanoid i-AMTR in the fields of sorting robots, rehabilitation medicine, and augmented reality.     

高层建筑物的外墙清洗

为适应高层建筑物外墙清洗技术在我国迅速发展的形势特编写此文，文章主要介绍了高层建筑物外墙清洗的设备和方法。针对建筑物污垢的成分、结构，附着方式和外墙材料理化性质及结构，指出清洗剂一般采用表面活性剂和助剂配成的水基洗济剂。并详细介绍了具体的清洗剂配方。