Earthquake analysis of isotropic asymmetric multistory buildings

Isotropic multistory buildings are the ones characterized by the property: all load‐resisting planar frames have proportional lateral stiffness matrices. In the present paper it is proved that the modal analysis of an N‐story isotropic asymmetric, torsionally coupled, building (a problem of order 3N) can be separated into two independent sub‐problems: (a) a sub‐problem that corresponds to a single‐story asymmetric, torsionally coupled, building (a problem of order 3); and (b) a sub‐problem that corresponds to an N‐story, torsionally uncoupled, planar frame (a problem of order N). It is also demonstrated that the orientation of peak modal seismic forces of the building is independent of the orientation of seismic excitation, which affects only their size. The separation provides a better insight into the structural behavior of asymmetric multistory buildings under earthquake ground motion. Copyright © 2006 John Wiley & Sons, Ltd.     

Experimental studies on the weatherability of the capivara dam basalts,rio paranapanema,brazil

The weatherability of the basalts in the Capivara Dam site, Rio Paranapanema, São Paulo State, Brazil, has been studied by means of saturation-drying tests. A great number of samples have disaggre — gated intensively with production of fines. The behavior of these rocks is related to their petrography, especially to their content in expansive clay minerals. These studies were performed in order to obtain data for the utilization of this material as rock fill, including ripraps.     

The Italian national survey of indoor radon exposure

An investigation is being developed by the Camitato Nazionale per la Ricerca e per lo Sviluppo dell'Energia Nucleare e delle Energie Alternative, ENEA, to assess the indoor exposure of the Italian population. The programme, which started in 1982, includes regional and local surveys in all the administrative districts and intensive investigations of factors which influence indoor radon levels. The survey is organized by statistical areas of sampling to obtain representative samples of houses. The definition of the areas takes into account basic parameters e.g. geolithological environments, radon soil gas from underlying soils and rocks, specific activities of local building materials, climatic and seasonal variations, building technology, types of houses and town planning. The collected data may also be used for the compilation of radon risk maps to plan special monitoring and remedial actions if needed. Preliminary results concerning the above items are discussed.     

Effectiveness of automatic sprinkler systems in exhibition halls

In cooperation with Mayor Daley's Committee to investigate the McCormick Place Fire, Underwriters' Laboratories tested the effectiveness of automatic sprinkler systems in a simulated exhibition hall having ceiling heights of 30 ft and 50 ft. The results may prove surprising to some who doubt the value of sprinklers in high-ceilinged structures, such as McCormick Place. Fire Protection Department Underwriters' Laboratories, Inc.     

Prediction of the effectiveness of rolling dynamic compaction using artificial neural networks and cone penetration test data

Rolling Dynamic Compaction(RDC),which is a ground improvement technique involving non-circular modules drawn behind a tractor,has provided the construction industry with an improved ground compaction capability,especially with respect to a greater influence depth and a higher speed of compaction,resulting in increased productivity. However,to date,there is no reliable method to predict the effectiveness of RDC in a range of ground conditions. This paper presents a new and unique predictive tool developed by means of artificial neural networks(ANNs) that permits a priori prediction of density improvement resulting from a range of ground improvement projects that employed 4-sided RDC modules;commercially known as"impact rollers". The strong coefficient of correlation(i.e. R0.86) and the parametric behavior achieved in this study indicate that the model is successful in providing reliable predictions of the effectiveness of RDC in various ground conditions.     

On the potential of combining neutron activation analysis and particle induced X-ray emission (PIXE) for micro- and microdistribution analysis of hard metals in human tissues

Tungsten carbide and cobalt are the main components of hard metal alloy while other metals such as chromium, niobium, tantalum, titanium and vanadium are sometimes added in smaller amounts. Exposure to hard metal dusts can induce a lung fibrosis with cobalt playing a major role. In order to provide information on the role that each metal may have in causing this disease, determination of the total content and the distribution of inhaled metals in lung tissue of hard metal workers is of paramount importance. However, samples such as transbronchial biopsy and bronchoalveolar lavage (BAL), often used in the medical diagnosis of pneumoconiosis, only allow for a small amount of material. This calls for sensitive and accurate analytical procedures for microdetermination and distribution of metals in pulmonary tissue and cellular material, such as macrophages. This work proposes a combination of sophisticated analytical techniques such as neutron activation analysis (NAA), currently applied to the determination of the total concentration of more than 30 elements in biological specimens, and PIXE analysis, particularly microPIXE, which has a great potential for microdistribution analysis in small biological samples. Principles and perspectives for the combined use of these techniques for the analysis of human tissue are outlined and discussed. NAA: determination of hard metals in lung tissue are carried out by neutron irradiation (2 × 10¹⁴ neutrons cm⁻² s⁻¹) in the HFR reactor of Petten. After neutron activation, radiochemical separations of ⁶⁰Co, ¹⁸⁷W, ¹⁸²Ta, ⁵¹Cr followed by computer-based high resolution gamma ray spectrometry allow the measurement of these elements in pulmonary tissues with sensitivities ranging from 10⁻⁴ μg (Cr) to 10⁻⁶ μg (W). PIXE: this technique is multielemental and of relatively high sensitivity (μg/g) even in small total sample masses of from 10 to 100 μg, thus allowing the analysis of parts of needle biopsies. Whereas PIXE has been successfully applied to many medical problems, its usefulness is limited in the total samples analysis for cobalt-related hard metal disease, due to the low levels of cobalt in tissue combined with severe element interferences from the generally more abundant metal, iron. Nevertheless, microPIXE, a special variety of the method scanning over the sample with a focussed ion beam of about 2 × 2 μm², could complement the NAA findings in total samples in the sense of achieving a microdistribution analysis of hard metals (including cobalt) in suitable thin tissue sections.The availability of specialized facilities at the JRC such as the powerful HFR reactor (Petten), the NAA laboratories (Ispra) and the microPIXE facility (Geel) could represent a European ‘reference pole’ for the study of metals in tissues of hard metal diseased subjects.     

Trace element analysis of Cretan wines and wine products

The object of this research is to investigate the ways and the degree of contamination of Cretan grapes from the area of Chania and their alcoholic products, with the elements aluminium, arsenic, cadmium, copper, chromium, iron, lead, manganese, nickel and zinc. Fifteen samples of grapes were collected and used for the production of experimental wines from rinsed and unrinsed grapes. A microwave furnace was used for the digestion and dissolution of the experimental wines, the precipitates that originated in these wines, as well as the wines of the corresponding producers. The analyses of all mentioned samples as well as 34 local alcoholic distillates were performed using total reflection X-ray fluorescence and graphite furnace atomic absorption spectrometry. The concentrations for all the elements that were determined were almost in all cases, well below the maximum permissible levels by the Greek and the European Union legislation.     

Tunnel fire and life safety within the world road association (PIARC)

This paper presents the global activities of the World Road Association (PIARC) in the area of fire and life safety in road tunnels. It traces the organizational structure in the form of technical committees, its publications, current activities and concludes with a summary as to the position of the organization with regard to fire and life safety in tunnels.     

Finite element three-dimensional elastic-plastic creep analysis

This paper presents a continued development of computationally efficient finite element methods for accurately predicting the isothermal three-dimensional elastic-plastic creep responses of thick and thin shell structures subjected to mechanical and thermal loads. This work is applicable to a wide range of engineering structures and most recently has been used in the elastic-plastic creep analyses of high-temperature nuclear reactor components and rotating turbine blades.Previous work in this area for elastic-plastic analysis has been demonstrated by Levy et al. In that reference, use of a variable number of stress points within an element to describe elastic-plastic behaviour was demonstrated. These ideas have been extended for combined plasticity and creep behaviour. Thus, within an element, the order of the allowable total kinematic strain distribution is dependent on the number of element nodes (assumed displacement distribution), and the order of the allowable plastic strain distribution (and hence the elastic-plastic boundaries) and/or creep strain distribution is dependent on the number and location of the stress points used to numerically integrate the inelastic effects. This allows for an accurate representation of the elastic-plastic creep behaviour within an element. This higher inelastic representation results in the use of a minimum number of degrees of freedom for a given nonlinear analysis, which is particularly important for combined creep and plasticity behaviour and for cyclic loading, where computer times can be prohibitive.The basic numerical solution procedure for the elastic-plastic creep analysis is an incremental predictor-corrector iterative scheme combined with the ‘initial strain’ approach. Attention has been given to the time step increment strategy for combined plasticity and creep as this governs efficiency and accuracy.The methods have been implemented into the three-dimensional solid element module (HEX) of the Grumman PLANS finite element program.Sample problems are used to demonstrate and investigate the accuracy and efficiency of these methods. Sample problems include combined plasticity and creep analysis of a simple rod under time varying load, stress-relaxation of a simple rod, thermal stress-relaxation of a plate subjected to a temperature variation across the width, and creep analysis of an internally loaded thick-walled pressure vessel.